I don't see a way to open the Bookmarks window in Sourcetree.
https://blog.sourcetreeapp.com/2012/05/15/bookmarks-window-reloaded/
It's gone since the release of Sourcetree 2.0: https://blog.sourcetreeapp.com/2014/09/25/sourcetree-for-mac-2-0-released/
I'm pretty sure they also added this repository browser to the windows version, if that's the one you're using. On opening a new repository it should always ask you if you want to add it to the repository browser for quick access later.
Related
I am creating successfully a subtree to a remote repo and pull/push successfully using Sourcetree. The substree repo appears below "Stashes" tab on the left of Sourcetree as "Subtree" tab.
However, when I close and reopen the Sourcetree, the "Subtree" tab and the subtree that I have defined earlier, disappears.
It does not disappear, if I close the project tab and reopen the project without closing the Sourcetree.
I have seen these two post with the same/similar problem:
First Post
Second Post
Both links belong to the same person.
I have tried the suggested solution there (clearing cache) but it did not solve my problem.
The person, who was in charge of developing this part of the Sourcetree, has not posted since 2017. Maybe he left Atlassian, and this issue is still there.
I have already asked this question in the Sourcetree forum, but no replies since April.
I have opened a bug report at this link
I have tried version 3.3.9 and the problem is still there.
It seems to be a simple "save" issue. I also remember that Sourcetree did not have this issue in the earlier versions.
I found out that this is consequence of another major issue with Sourcetree versions came after 3.2.6. After this version, a major bug is introduced, probably something related to authentication, and it results a constant red exclamation mark on the remote button. This mark can be fixed in version 3.2.6, but not in the later versions. So, I am staying with version 3.2.6 for now.
I've reinstalled my PC and tried connecting back up to my Azure DevOps Repo using VS Code and TFVC. I'm using TFVC Location with Visual Studio 2019 Community TF.exe. It all seems to work and I can connect to my repo with my credentials. It all seems to load up fine and I can even see TFVC with a number of changes/differences. - see image below. However I'm expecting to see my source control and list of files to commit like before. But the panel is blank. There's no errors in the Output window of VS Code either.
I've tried removing and re-adding the workspace. Tried editing/adding anew file to the project in hope of kickstarting TFVC pane to show the file list. - the number next to TFVC updates but I don't see any menu button or files list.
Has anyone else had this and know a solution, or know where I'm going wrong.
Just toggle "scm.alwaysShowProviders" on and off from whatever value your have (default is false), this would cause the source control pane to redraw and fix the issue for now.
I believe per the issues in GitHub that this issue is fixed for most people as of VSCode version 1.39.2, but I was still seeing it for projects based on a Git repo.
After some trial and error I found this setting was the culprit: "scm.alwaysShowProviders": true
When I remove that setting, or set it to false, my Source Control pane works correctly.
This happens to me occasionally. I just figured out I can fix this by right clicking in the blank area and then selecting the repository I want to show up
Issue opened on GitHub: https://github.com/microsoft/vscode/issues/82374
For now I've rolled back to the August update and that's resolved it.
Clicking the blank area and slecting repo does the trick
I had this problem on the 1.55 version, as it's centrally controlled I couldn't manually update, but when they pushed the 1.64 version through, the problem has gone away, was driving me mad!
Very new to Github and I downloaded the desktop application in hopes of understanding it better. What I'm trying to do is commit/push files by dragging them into my repository folder, but they don't show in application when moved? I tried editing a txt file and as soon as I save it, it appears. I don't want to have to edit every file I add to my repository as I edit it elsewhere. How do I make the non-edited, dragged-and-dropped files appear?
Also, is there an official GitHub support forum? I can't find anything on their website where you can ask questions/etc and I'm not sure StackOverflow is the best place for this question.
Thanks!
That's the way how git works. It doesn't make sense to add every time the unedited files.
When it notices you added/edited/removed files, git will know that.
I pasted a file (blocks.gif) in my repository and in GitHub Desktop it I see the following (click the 1 uncommitted change) and you should see the new files there. Then you can write a commit message and commit the changes.
Also, is there an official GitHub support forum?
When you need help using GitHub, you can always contact the support team (or write an email to support#github.com). They are awesome people. :)
https://github.com/contact
We have been using Domino on a large project for years without any real source-control (other-than server backups). So, I was rather pleased when I noted the latest Designer 8.5.3 has potential integration with SVN.
I was unable get SVN working just by following the original instructions for as already noted on Stackoverflow the update sites have moved. The solution posted on OpenNTF, only half worked, with Domino still croaking at GEF, Mylyn and some other missing plugins. After finding and installing them, I still do not seem to have source-control integration.
What I have now is the ability to create on-disk projects but I do not seem to have any source-control features. I was expecting to see menu items for commit, update, revert …etc – is this how it works in Domino?
I can of course create a repository to commit the on-disk project to but I was hoping for integration inside of Domino. Whilst having years of experience in programming I’m a novice with Eclipse. I assume that I’ve done something wrong with installing the plugins? it was certainly a complicated process trying track down missing plugins.
Has anyone tried this recently and succeeded? What files do I need to install, setting tweak, …etc, to ensure this works? I’m happy to install my Designer fresh and follow a list of instructions.
Also, am I understanding how the integration works? Will I get command integration within Designer or do I have to work separately with the on-disk projects? I was really hoping for this be easy to integrate into normal workflow so I can convert the team to using it (adding too many extra or complicated steps is unlikely to create a conversion).
I posted a screenshot of my installed plugins in case this is helpful.
Mercurial? As an aside, has anyone used Mercurial instead of SVN with Designer? I would rather use Hg as I’m using this for related Dojo projects and will be easier for the team to use one system. However, I will settle for SVN as any source-control is better than non.
Update: This is answer is now out-of-date. It is useful in that it should point users in the right direction but it isn't really a working answer anymore. I no-longer develop on Lotus Notes so I cannot update it to a current solution.
I managed to figure this out eventually but will post the solution, just in case anyone else has the same trouble.
The answer by Per Henrik Lausten was very helpful as it showed me the route to follow through the menus. The main problem is that I'm not used to how Eclipse works so I didn't realise you had to go to the "Team" menu and "Share Project" after creating the on-disk project. When I did this I discovered that both SVN and CVS were already available.
I found that SVN did not like the file:// protocol (perhaps a windows issue?) Since, I could not arrange for an SVN server on our network, I decided to go down the Mercurial route. This was better for us as our other projects are stored in Mercurial.
Setting-up Mercurial with Lotus Designer 8.5.3:
In Domino preference (File -> Preferences), set: Enable Eclipse Plugins in the Domino Designer section to ticked.
Also in the preferences set: Use Binary DXL for source control operations to unticked (File -> Preferences, Domino Designer -> Source Control). Without this ticked I was not getting text for my Lotusscript agents and it would be difficult to compare changes.
Go to File -> Application -> Install:
Select Search for new features to install and click Next.
Click Add Remote Location button
Add the url: http://mercurialeclipse.eclipselabs.org.codespot.com/hg.wiki/update_site/stable/ and give it a suitable name
Once you've added this, ensure it is ticked in the location list and click Finish
Design will then search for updates and give you a list. Untick "Only show latest version of a feature per update site"
Tick MercurialEclipse 1.6 from MercurialEclipse Stable Releaes. I found that the latest version does not work, however a previous Stackoverflow conversation indicates that version 1.6 does work.
Click finish and allow it to install.
You will be asked to approve various plugins and then to restart.
MercurialEclipse, should now be installed!
To start using Mercurial with a Domino Application:
Right-click the application in the Applications tab, select: Team Development -> Set Up Source Control for this Application.
Give the project a name and choose a location for the project to be stored.
Designer will then do a DXL export of the database to your chosen location. A Navigator tab will appear next to Applications.
Right-click your new disk-project in the Navigator and select: Team -> Share Project...
Select Mercurial from the Repository types and allow Designer to create the repository.
You should now have access to various Mercurial functions via the Team menu. (You need to make your first commit.
When you make changes you want to commit to source-control, you need to:
Right-click the application and choose: Team Development -> Sync with on disk project...
Go to the Navigator tab and right-click your on-disk project, selecting team.
Most of the above steps should be obvious but decided to post full details in case anyone struggled like I did with Eclipse and how to use it properly. Once I figured it out, it really was quite easy.
Keith Strickland has created a series of blog posts on using source control with DDE. They might help you:
Keith Strickland: source control in DDE part
1: http://www.keithstric.com/A55BAC/keithstric.nsf/default.xsp?documentId=B236F39DEAF6C52F85257A72001157BF
Keith Strickland: source control in DDE part
2: http://www.keithstric.com/A55BAC/keithstric.nsf/default.xsp?documentId=B5D76A6DA163DCB585257A7C004802B6
Keith Strickland: source control in DDE part
3: http://www.keithstric.com/A55BAC/keithstric.nsf/default.xsp?documentId=C2C46D278948A24985257A7D0055D25E
How to disable source tab in Google Code? I don't want any random users to look at my code.
Before you say that this can't be done, that Google Code is by default open source. Someone managed to do it, somehow.
Edit: Before you downvote me further, take a look at the link I provided. It's possible to do it, despite whatever you want to say. And I want to know how.
I don't want any random users to look at my code.
You can't prevent people from downloading the source code. Google's SVN repositories are open to anonymous browsing and checkout. For example, in the project you cited (the StackOverflow clone), notice that
svn checkout http://cnprog.googlecode.com/svn/trunk/ cnprog-read-only
works just fine for downloading the source.
If you don't want people looking at your source code, don't use a free public-hosting service. Setting up a local svn repository is very easy, in any case: here's how you'd go about setting one up and adding stuff to it.
In your GC page Administer|Tabs then check the hide checkbox next to Source. Your code will still be available via SVN though.
The whole point of Google Code is that it is for open source. That means everyone is allowed to see it. If you don't want people looking at your code, use some closed source hosting site.
You can replace tabs with Wiki pages (for example, to point to your GitHub repository), but you can't prevent access to the Google SVN server.