I am looking to create a blog website.
I was searching for CSS Template That I can use for my blog website.
I found purecss.io blog theme very good.
How can I use it as my website template
What kind of Blog system are you using? Wordpress?
To use this layout: http://purecss.io/layouts/blog/
You have to copy the html structure from the layout into your Blog template. You must also use the same css files.
If you're using Wordpress you could start with this theme: https://wordpress.org/themes/blankslate/
It has all functionality without any layout.
Related
I would like to create a wiki page that is a preamble (standard markdown) followed by an HTML/JS code listing followed by (in a frame I suppose) the page that this code would generate.
Is this possible?
PS The code is: http://pipad.org/MathBox/slides_simple.html
Github Wikis allow you to embed HTML, but not all HTML tags are supported.
To embed supported HTML:
Edit a wiki page.
Ensure the edit mode is on "Markdown".
Type the html directly into the main content area (there's no "code" view, like you often see in tools like Wordpress).
Which tags aren't supported?
I couldn't find documentation on this, but we have a few clues:
Github wikis are built on a software tool called Gollum. We can see which tags are supported in Gollum by default here in the Gollum docs. Github may customize these defaults for their use-case, but I'll bet it's pretty similar.
I went ahead and created a test wiki here with all the major visual html elements added to it (copied from Poor Man's Styleguide). It looks like the main tags that don't display are iframe, video, audio, and all of the various form inputs (textarea, input, select, etc).
I am trying to create a Editor component that will take inline javascript.
I understand that I can use clientlibs folder for loading JS, but some of the video CDN folks require you to put embed tags with JavaScript in the editor, and I think some of that is also used for rapid development. Currently with the state of RTE, I cannot put a script <script/> tag even after extending it, as it strips it out and only takes the html tags.
Could you please provide any insight if this could be doable in AEM 6.1
Here's what I have tried:
I looked at several post didn't got a clue
extended RTE using Adobe's documentation, but see a script button, that only takes html tags.
looked for hacks that could tell me what part of the code is tripping out </script> tags or could not execute js.
looked for some components out there that does that, found nothing
so far.
I am very new in TYPO3 (I came from Joomla and WordPress) and I am having difficulties in understanding how templates are handled in TYPO3 (it seems to me that the situation is more complex in TYPO3 than it is in Joomla and in WordPress).
I have installed and I am testing this version of TYPO3 introductionpackage-6.1.3.zip
In Joomla and in WordPress a template simply is an HTML structure (which are marked in the various areas of the page where the CMS modules will be placed) and the related CSS settings.
In TYPO3 it seems to me that the situation is very different or am I wrong?
At this moment I am reading this section of the official documentation that references the default template of the TYPO3 Introduction Package: http://docs.typo3.org/typo3cms/GettingStartedTutorial/Templates/Index.html
The difference between static content and dynamic content of a website created using a CMS is pretty clear to me (this is not different from any others CMS like Joomla or WP)
Dynamic content: is something that is dynamically created by the CMS (executing some queries) as a menu (it look into a DB table and then a script renders the menu on the page)
Static content: is something that is fixed as the title of the website or a background image
Until now I think that it is pretty clear for me but I have many doubts when the documentation speaks about the Template Record as a way to implement the previous principle.
Here: http://docs.typo3.org/typo3cms/GettingStartedTutorial/Templates/%28%28generated%29%29/Index.html
it says that:
This is a control element that instructs TYPO3 how to handle a certain
branch of the page tree.
In particular with this image it shows how to modify these template records for the Introduction Package Template (Introduction Package is also the name of the template provided with this package or what?):
Then on this section on the documentation it says:
If you edit the template "Introduction Package" you will see that most
fields are empty. For each website you need a TypoScript template on
the ROOT level, in this case that is the "Introduction Package"
template. The TypoScript configuration of a website can be quite long
therefore it is possible to make many small TypoScript templates that
get included in the main template. For better maintenance, all
TypoScript of the Introduction Package has been put into the folder
'Typoscript Templates'. The only thing the "Introduction Package"
template does is to include the "ROOT" template that in turn includes
other templates.
And this is totaly obscure for me: I have understood that TypoScript is a configuration language that can be used to configure the frontend (so I think that I can use it to configure how my page will appear) but I can't understand the following assertions:
What does this mean: For each website you need a TypoScript template on the ROOT level, in this case that is the "Introduction Package" template ? I have installed TYPO3 Introduction Package and I have only a web site !!! What is the ROOT level of the website? Is it the Welcome to TYPO3 node in the List section Tree? So in pracatice I am assigning a specific template to the root of a website and this is used in all subnodes (all the pages as Home, About TYPO3, Features, etc)?
What does it mean when it says: For better maintenance, all TypoScript of the Introduction Package has been put into the folder 'Typoscript Templates'. Where is this folder? I don't have it.
What does it mean when it says: The only thing the "Introduction Package" template does is to include the "ROOT" template that in turn includes other templates.?
Tnx so much
Andrea
The root level of your website is the page called Home. It also has the globe instead of a normal page icon, because the flag Use as root page is set in the page properties under behavior.
When you access a page in TYPO3 CMS, then it will walk up the rootline until it finds a root page with a template record. In this case, it is indeed a record called Introduction Package, but what is more important, is that this is a record of the type template.
OK, so far we have found a template for your request. Now TypoScript comes into play. On a normal request, the template engine will search for an object named page which is (usually) of the type PAGE. Thus the most simple template is:
page = PAGE
page.10 = TEXT
page.10.value = <h1>Hello World</h1>
Which just prints Hello World on your website.
What happens next depends on your template approach chosen (marker base, automaketemple+marker, templavoila, fluid, fedext, ...). That means that TYPO3 CMS does not just have one template approach (or one kind of template), but is extensible and very flexible, as you can combine them.
In the Introduction Package uses the automaketemplate+markers approach. This includes a ready HTML template, automatically creates blocks based on certain rules and then replaces those blocks with dynamic content.
OK, where do you find the configuration for this?
The actual template file is fileadmin/default/templates/introduction_package_site_structure_template.html.
The TypoScript configuration is in fileadmin/default/TypoScript. There you can find a file called setup.ts. It includes all other TypoScript files. There are various folders, e.g. menu for the menu definition, block for the dynamic blocks, etc.
The configuration of automaeketemplate is in Extension/AutomakeTemplate/setup.ts.
The sections defined with the help of automaketemplate are replaced in Page/setup.ts.
The full TypoScript defines a tree structure of objects with their configuration. You can view the full parsed template with either the Template Analyzer or the TypoScript Object Browser which you find in the template tools in the dropdown select box on top of the module.
The separation of the TypoScript into several files is done by the purpose of the configuration inside the files. This is meant for easy maintenance and not for easy learning. You can always use the Template Analyzer to see the full template that is generated out of the fragments and the TS Object Browser to see what kind of configuration tree this results in.
This might sound a bit difficult at first, especially compared to the primitive template systems of other products, however it gives you great possibilities that are yet easy to maintain, even if you do major updates.
It is great to see that people decide to use TYPO3. In my point of view the biggest difference to WordPress, Drupal...
is the strict separation between HTML and dynamic logic, witch can be TypoScript/userFunc or Fluid logic...
and even this makes TYPO3 so powerful. nothing against WordPress, Drupal... ect. but to use PHP in templates is especially for updates a dangerous thing to do.
I am always impressed whats possible with TYPO3. "I cant do it" is not valid for TYPO3. TYPO§ always has a way.
It is indeed a hard way through to learn all the corners of TYPO3 but it is worth.
Keep doing it and you will succeed
Ludwig
Great to hear you also wanna use TYPO3 as a CMS.
To understand the TYPO3 CMS better, i think you can better begin from scratch, meaning download the source + dummy package and install it on your server, or maby download a wamp package.
Currently I use Fluid to build my templates. For the part outside TYPO3 its much like Joomla, just create one or more HTML files, with some special markers.
The other parts, which are in TYPO3, may be some more difficult now, and it would take a lot of time to explain that here, so i'll refer to a tutorial made by Thomas Deuling:
http://thomas.deuling.org/2011/06/create-a-complete-typo3-website-by-using-the-fluid-template-engine/
You might wanna join the TYPO3 mailing list for italy, found at http://lists.typo3.org/cgi-bin/mailman/listinfo/typo3-ug-italy.
Furthermore, the TYPO3 website is filled with documentation, although sometimes out of date its still usefull. Also you might wanna take a look at the TYPO3 certified integrator program. There you can find all the basics to become a master at TYPO3.
Please feel welcome to the community, TYPO3 is inspiring people to share!
Kind regards,
Jeroen
Hi i wrote a little starter ts time ago.. maybe helps you
Remember in TYPO3 there are many ways to solve things!..
gl
Setup:
config {
baseURL = http://www.bla.com/
prefixLocalAnchors = all
meaningfulTempFilePrefix=1
doctype=xhtml_trans
htmlTag_langKey=de
remove_defaultJS=external
inlineStyle2TempFile=1
disablePrefixComment = 1
linkVars=L
sys_language_uid=0
language=en
locale_all = en_EN.UTF-8
xmlprologue = none
}
page = PAGE
page.typeNum = 0
page.bodyTag=<body>
page.10=TEMPLATE
page.10 {
template = FILE
template.file = fileadmin/templates/template.html
workOnSubpart = DOCUMENT
subparts {
CONTENT=COA
CONTENT.10<styles.content.get
}
}
File: template.html
<!-- ###DOCUMENT### -->
<!-- ###CONTENT### -->CONTENT<!-- ###CONTENT### -->
<!-- ###DOCUMENT### -->
I am creating a new template and then a page from SCRATCH in CQ5. But I can't find the option to add my own CSS/images/JS to the page.
I mean a place to add/upload the actual files.
All the tutorials I've seen talk only about creating a template based on an existing template. Is there any tutorial on how to create the page from scratch ?
Your CSS and JavaScript go into nodes under /etc/designs/[your project's name]/clientlibs. (Ordinarily, you would set the page property cq:designPath of your content's home page to be /etc/designs/[your project's name] to point to this.) It's common practice to set up a subfolder of clientlibs called default, where your general-purpose style sheets and JavaScript go; you can set up other clientlibs for special-case script and style sheets. The simplest way to incorporate your script and style sheets into your page template is the <cq:includeClientLib> JSP tag.
The Adobe docs on clientlibs will also be useful to you, and explains how to use the tag.
#David , thanks for your answer, but for now, I got a better way to add and then use external files using WebDAV with CQ5.
The basic integration of WebDAV with CQ5 application is mentioned in this page
How can I implement a full html,php,js and css page into a wordpress page?
Example:
I have a app.php that has a text box, when You press enter it displays the text with a php echo. With the users profile picture from Facebook.
How Can I inset/implement that into a WordPress page?
HTML/PHP: The simplest way may just be to create an extra template in your theme. You can view WordPress template hierarchy here: Template Hierarchy
JS/CSS: If the JavaScript and CSS makes the most sense to be embedded (it usually does!), you can use hooks and actions in a simple plugin (or potentially your functions.php page) to include the JavaScript and CSS you need.
wp_enqueue_script
wp_enqueue_style
Note: I have not personally used functions.php (found in your theme files) to call these sorts of hooks, but I assume it would work just fine.
If you are using a theme that constantly receives updates, it is worth building a plugin to do the job. If not, it's easiest to just modify the theme.
There are two options as far as I know. First one is that you embed the code directly into your posts, and install the plugin called PHP execution. Second, try to create your own page template, and place your own code in the template. then you can create a page in the dashboard and select the template.