Does the Datapower Secure Connection in Bluemix require the Datapower to be internet facing ?
If Bluemix starts the connection, the answer is maybe yes.
But as the Basic Secure Connection (Software), if that one initiates the connection, the server running the Basic Secure Connection only needs to have internet access (behind a firewall/gateway/etc...), but doesn't need to be internet facing : IP# on internet.
I have set up a Bluemix DataPower Secure Connection (in the Bluemix Cloud Integration Service) towards my on-premise DataPower appliance. The DataPower Secure Connection are pointing to an Internet IP, and my on-premise firewall maps this to the DataPower appliances "DMZ" ethernet interface.
On the DataPower appliance, the Cloud Gateway Service is configured to receive connections from the Bluemix DataPower Secure Connections. This seems to work well for endpoints I have added to the Cloud Gateway Service. Right now I am working on adding (1-way and 2-way) TLS in the Bluemix DataPower Secure Connection.
To my knowledge the DataPower connector and the Basic Secure connector must be able to connect to your DataPower. This is usually initiated by the on-premises side, either your DataPower or the Basic Connector client running on-premises.
Also, DataPower v7.2 now supports Secure Gateway connectivity which is the preferred way to securely connect your cloud applications to your on-premises DataPower resources. The UI for DataPower has been updated to provide the ability to configure for these connections.
Related
I want to consider using a Bluemix to run my application? For a firewall problem, I want to use a secure gateway of IBM that is one service in Bluemix. It uses a web socket. I customized a web socket of jetty in the past. So I am wondering if a web socket client makes a permanent connection with a web socket server. Does the server giving data back to the client? If the connection is disconnected for some reason, how can the web socket handle this exception?
If you're wondering about how Bluemix Secure Gateway handles these situations, then yes, the Secure Gateway Client creates a persistent secure websocket connection to the Secure Gateway Servers which allows for the necessary communication between your application and your resource(s) behind the firewall. If the websocket connection goes down, the Secure Gateway Client will attempt to establish a new websocket connection with the Secure Gateway Servers.
Should I be able to setup secure gateway to be able to connect to my on-prem SQL server DB, using SQL Server Management Studio on my laptop from home (not on prem)?
You don't "have to" use the secure gateway in order for your application on the cloud to see your local db. You could simply give your application the public ip (and port) of the local machine and they should work fine.
It is however a good practise to use the Secure Gateway service as it can ensure the security of the local-to-cloud communication. Make sure to have a look at the documentation to learn how the service works - https://console.ng.bluemix.net/docs/services/SecureGateway/secure_gateway.html
Our customer is planning for APIC on Bluemix cloud to On-premise connectivity for IIB APIs.
For secure connection we are planning to use Secure gateway service on Bluemix and creating secure gateway client on customer existing DataPower .
At present there is an internet connectivity via eth0 of DataPower at customer datacenter where a service is running on 443.
We want to seggregate traffic comming from Bluemix and the existing non-bluemix traffic.
So We are planning to create a new eth1 dedicated for Bluemix calls, that will also talk to internet on port 443 and 9000 (as required by secure gateway service) .
How do we make sure Bluemix traffic cames to Gateway via Eth1
The Secure Gateway Client initiates the connection to the SG Servers in Bluemix with the combination of requests across 443 and 9000. Once that connection has been initiated, it will remain open and all traffic from Secure Gateway will travel across it.
Corporate AS400 server having Application and database DB2 running. currently there is no reporting tool for this application.
Planning to create new application on IBM bluemix with PHP. how can I connect secure DB2 database with IBM bluemix API.
As commented by mustaccio, you have tagged your question with secure-gateway - have you seen the Bluemix secure gateway documentation?
About Secure Gateway
Last updated: 6 December 2016
The Secure Gateway service provides you with a secure way to access
your on-premises or cloud data from your Bluemix® application through
a secure passage.
How Secure Gateway works
As displayed in the following diagram, the
service works by using a client to connect to your Bluemix
organization. Next, you add the service to your Bluemix organization.
Then, by using the Secure Gateway UI or REST API you can begin
creating your gateway by connecting to your client and creating a
destination point to your on-premises or cloud data. To increase
security, you can add application-side Transport Layer Security (TLS),
which encrypts the data that travels from your app to the client. You
can extend this security with client-side TLS, which encrypts the data
from the client to the on-premises or cloud data. When you complete
your gateway configuration, you can monitor the behavior of your
gateways and destinations in the Secure Gateway Dashboard.
Source: https://console.ng.bluemix.net/docs/services/SecureGateway/sg_overview.html#sg_overview
The Secure Gateway documentation describes all the steps you need to follow to connect a Bluemix application to an internal service.
I am going to use Secure Gateway service in Bluemix and I have some questions about how I should make it work.
Systems in my data center's intranet access the Internet through a proxy (with no authentication). Can Secure Gateway connect to Bluemix via a proxy?
Does it connect to Bluemix via HTTPS protocol?
The network admins asked me: What are the IPs (or the IP range) of Bluemix, any idea?
Thank you very much.
A Secure Gateway instance runs in two parts, as shown in "Reaching enterprise backend with Bluemix Secure Gateway via console": the gateway and the gateway client. The gateway runs in Bluemix, the gateway client runs in the data center containing one or more systems of record to connect to. The gateway client needs network access to the Bluemix data center (typically via the Internet) and to the systems of record (via the data center's internal network). The gateway client initiates the connection, so it needs to know Bluemix's address, but Bluemix doesn't need to know the gateway client's address.
To answer your questions specifically:
A proxy isn't supported. The gateway and its client need direct access to each other.
The connection uses HTTPS for SSL encryption. The transport level security (TLS) options can be used to add authentication.
Bluemix's IP addresses aren't published.
For point 3:
The client connects outbound to the cloud services. Once the SecGW is connected, all additional Destination connects flow through that connection, no additional firewall or iptables rules are needed. If they have a rule in-place so that the on-premises machine where the SecureGateway client is installed can use the outbound port 443 (HTTPS) to make connections, that is all they need.