I've updated my Ubuntu 14.04 to the latest 15.04. Since then Mongo failed to run. can run the command mongo and it'll advise the version and so on but server will not run: sudo service mongod start as normal.
When I ran: sudo apt-get install -y mongodb-org it failed with the error in the screen shot below:
I completely purged mongo and re-installed, followed the instructions from here. However when I ran sudo apt-get update I noticed the below packages were 404'ing. See Screen shot below.
If anyone could shed any light on this would be great?
Following instructions from this page page http://docs.mongodb.org/manual/tutorial/install-mongodb-on-ubuntu/
but with slighty changed second step 2. Create a list file for MongoDB:
echo "deb http://repo.mongodb.org/apt/ubuntu trusty/mongodb-org/3.0 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-3.0.list
I put trusty (code name for Ubuntu 14.04 LTS) instead of $(lsb_release -sc) which issues vivid as codename for 15.04
I see now that #Nail Lonergan already commented echo path change...
There is currently no build available for Ubuntu 15.04. Check this page for all builds: https://www.mongodb.org/downloads#development
After having heaps of issues, finally this is how I installed it,
Ubuntu 15.04
apt-get update
apt-get dist-upgrade
apt-get install -y mongodb
sudo apt-get install upstart-sysv
sudo service mongodb status
if not running
sudo service mongodb start
Install PHP Driver
sudo apt-get install php5-dev
sudo apt-get install build-essential
sudo pecl install mongo
https://sonnguyen.ws/install-mongodb-mongo-php-in-ubuntu/
sudo apt-get install mongodb
ps -ef|grep mongo
sudo pecl install mongo
sudo apt-get install php5-dev php5-cli php-pear
Related
I am trying to install mongodb on my Ubuntu 18.04 LTS, but it has the following error saying
You might want to run 'apt --fix-broken install' to correct these. The
following packages have unmet dependencies: mongodb-org : Depends:
mongodb-org-server but it is not going to be installed
Depends: mongodb-org-mongos but it is not going to be installed
Depends: mongodb-org-tools but it is not going to be installed E: Unmet dependencies. Try 'apt --fix-broken install' with
no packages (or specify a solution).
umar#umar-Lenovo-ideapad-320-15ISK:~/Desktop/portfolio/async-demo$
sudo apt-get install -y mongodb
I beleieve the reason behind this is already mentioned on their website, clearly saying
PLATFORM SUPPORT
MongoDB only provides packages for 64-bit LTS (long-term support)
Ubuntu releases; for example, 14.04 LTS (trusty) and 16.04 LTS
(xenial). See Supported Platforms for more information.
These packages may work with other Ubuntu releases; however, they are
not supported.
So how can I install mongodb on my latest Ubuntu 18.04 LTS?
For sake of clarity, I am listing the things I did to correct the errors:
I followed their official website to install mongodb
1. sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 9DA31620334BD75D9DCB49F368818C72E52529D4
2. echo "deb [ arch=amd64,arm64 ] https://repo.mongodb.org/apt/ubuntu xenial/mongodb-org/4.0 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-4.0.list
3. sudo apt-get update
4. sudo apt-get install -y mongodb-org
Now here I got errors saying: You might want to run 'apt --fix-broken
install' to correct these. The following packages have unmet
dependencies:
I tried,
apt --fix-broken install
It did not work, somewhere I got clue to run
sudo apt -f install
It also returned error.
Errors were encountered while processing:
/var/cache/apt/archives/mongodb-org-server_4.0.0_amd64.deb
/var/cache/apt/archives/mongodb-org-mongos_4.0.0_amd64.deb
/var/cache/apt/archives/mongodb-org-tools_4.0.0_amd64.deb E:
Sub-process /usr/bin/dpkg returned an error code (1)
I believe the main problem is compatability with version. So basically I have Ubuntu 18.04, how I install mongodb on this version, so that I can work without any trouble.
You need to first uninstall the mongodb, you can use:
sudo apt-get purge mongodb-org*
After this, install mongodb through the following commands:
sudo apt-get install mongodb
And then update:
sudo apt-get update
You are done with the installation of mongodb. You can check it by using the below command:
mongo --version
EDIT: It's been a number of years, and unfortunately the top answer still points users away from the latest stable version of MongoDB. In fact the last available package for mongodb is 3.6.3.
I don't work at the company anymore, but I will point to:
https://www.mongodb.com/docs/manual/tutorial/install-mongodb-on-ubuntu/
That's the best way to install the latest stable version MongoDB. It includes instructions for adding the necessary repositories and keys to allow running apt install mongodb-org. There is a platform support matrix that will help with identifying which versions of MongoDB you can install on any given Linux OS version.
just want to chime in here. I'm the Senior Technical Writer for MongoDB Server Docs. This post is one of a few that comes up with "install MongoDB on Ubuntu 18.04", and there are several comments here referencing the mongodb package for installation. The unofficial mongodb package provided by Ubuntu is not maintained by MongoDB. You should always use the official MongoDB mongodb-org packages. Furthermore, from a bit of personal testing it looks like having mongodb installed will cause issues if you try to install mongodb-org, so its just added trouble
The few times I've run into this issue when testing locally, attempting to install one of the subpackages (i.e. mongodb-org-server) usually surfaced the actual error (i.e. missing libcurl3, which was removed in 18.04 as a default installed library). These issues may be more common when testing development builds ( at the time of writing, that's the 4.2 dev series).
To check which package you have installed on your local system, run the following:
sudo apt list --installed | grep mongo
This was my output after I installed mongodb, then attempted mongodb-org:
mongo-tools/bionic,now 3.6.3-0ubuntu1 amd64 [installed,auto-removable]
mongodb-org/bionic,now 4.0.5 amd64 [installed]
mongodb-org-shell/bionic,now 4.0.5 amd64 [installed,automatic]
mongodb-server-core/bionic,now 1:3.6.3-0ubuntu1 amd64 [installed,auto-removable]
So you can see, I've got a mix between the two packages (and a bunch of dkpg errors). I ended up using a mix of apt remove , apt autoremove, and apt purge to fix up the system.
Based on this excellent Answer:
https://stackoverflow.com/a/51421152/659354
And this Page:
https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu/
The commands I used to install MongoDB 4.2
sudo apt-get purge mongo* - Note: mongo to remove the client as well as the server.
sudo apt-get install mongodb-org - Note: install command run after the Mongodb.org Source was added to the Apt-get sources list.
This is because as of now Mongo DB for Ubuntu 18.04 is only available as a development version (See: MongoDB Distros).
I just installed it by doing the following:
Add the corresponding signature:
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 4B7C549A058F8B6B
Add the supported version:
echo "deb [arch=amd64] https://repo.mongodb.org/apt/ubuntu bionic/mongodb-org/development multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-4.0.list
Update:
sudo apt update
Install:
sudo apt install mongodb-org-unstable
If you get a "GPG error" repeat step 1 with the key that is shown in the error message. You might be able to install via
sudo apt install mongodb
but according to MongoDB this is not supported and will most probably not install the newest version.
The easiest way to install MongoDB and use the mongod command on ubuntu 18.04.
Update the packages list.
$ sudo apt update
Install the MongoDB.
$ sudo apt install -y mongodb
Check the service's status.
$ sudo systemctl status mongodb
3a. You should see
● mongodb.service - An object/document-oriented database
Loaded: loaded (/lib/systemd/system/mongodb.service; enabled; vendor
preset:enabled)
Active: active (running) since Sat 2019-03-11 10:45:01 UTC; 4min 13s ago
Docs: man:mongod(1)
Main PID: 2312 (mongod)
Tasks: 23 (limit: 1153)
CGroup: /system.slice/mongodb.service
└─2312 /usr/bin/mongod --unixSocketPrefix=/run/mongodb --config
/etc/mongodb.conf
To allow access to MongoDB on its default port 27017
$ sudo ufw allow 27017
Check status
$ sudo ufw status
5a. You should see
Status: active
To Action From
-- ------ ----
27017 ALLOW Anywhere
27017 (v6) ALLOW Anywhere (v6)
5b. If it returns inactive
$ sudo ufw enable
Output:
Firewall is active and enabled on system startup.
Check the / directory to see if there is a data/db directory, if not:
$ sudo mkdir -p /data/db
To run the mongod first you need stop mongodb:
$ sudo systemctl stop mongodb
Finally, you can run the mongod:
$ sudo mongod
cd /etc/apt/sources.list.d
remove files related to mongodb
sudo apt update
This solved it for me.
Uninstall and remove any Mongo packages.
$ sudo apt-get purge mongodb-org*
Check if related directories removed
$ sudo rm -r /var/log/mongodb
$ sudo rm -r /var/lib/mongodb
Recheck for autoremove any remaining mongo packages
$ sudo apt-get autoremove
Configure your directory
$ sudo dpkg --configure -a
Force install anything required
$ sudo apt-get install -f
Install from official site: https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu/
Finally restart your Ubuntu and check status of Mogodb server as you did earlier.
If you need to install mongodb binary (Manually) to your Ubuntu 18.04 LTS (Bionic). You need to download mongodb .tgz file from this link .
1) Download it to your ~/Downloads folder and moveit to home directory by typing mv Downloads/mongodb-linux-x86_64-ubuntu1804-4.0.4.tgz ~/
2) Then unter it by typing tar -zxvf mongodb-linux-x86_64-ubuntu1804-4.0.4.tgz place it here (Home directory /home/). Dont move it from here.
3) Then make a directory at /data/db location and give write permission to thatdirectory.
sudo mkdir -p /data/db
sudo chmod -R 777 /data/db
4) Now, this is the tricky area. Make sure u r in hme directory by typing pwd (Present Working Directory)
pwd
it will show
/home/<your user name>
Then type
ls -al
This command will show up all hiddenfile at home directory and search for
~/.bashrc
5) Edit the .bashrc file and write
export PATH=mongodb-linux-x86_64-ubuntu1804-4.0.4/bin:$PATH
and save the file type source ./bashrc
Then type echo $PATH at terminal it will display ~/mongodb-linux-x86_64-ubuntu1804-4.0.4/bin:/home/xenon/.nvm/versions/node/v10.15.0/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin
6) Now at terminal type mongo --nodb
it will show MongoDB shell version v4.0.4
From here , you are all set, go ahead and enjoy mongodb installation. This istallation is bit complex but by this method you can easily control the version of mongodb and use it as per your need.
7) Then start mongod
>sudo mkdir -p /var/log && sudo chmod -R 777 /var/log
>mongod --port 27017 --dbpath /data/db --logpath /var/log/local.log --fork
>mongo --port 27017
I had the same problem, and for me the solution was purge, but with the (*) . Purge everything, so i did this:
sudo apt-get purge mongo-tools*
sudo apt-get purge mongodb*
then i follow the steps from the documentation. (Actual version is 4.2.2), and the installation was in Ubuntu 18.04. (URL: https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu/)
wget -qO - https://www.mongodb.org/static/pgp/server-4.2.asc | sudo apt-key add -
echo "deb [ arch=amd64 ] https://repo.mongodb.org/apt/ubuntu bionic/mongodb-org/4.2 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-4.2.list
sudo apt-get update
sudo apt-get install -y mongodb-org
With that four steps from the documentation i finally install mongodb community edition on Ubuntu. My problem was 3 files,that can't process.
mongodb-org-server
mongodb-org-mongos
mongodb-org-tools
I hope its help someone
run sudo apt autoremove and re-install mongodb .
For Ubuntu version 18.04 LTS, it's better if you will install MongoDB manually.
I need to go through the following steps to make it run on my Ubuntu 18.04:
Fallow manual installation steps from the following mongo DB manual
https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu-tarball/
Download .tgz with the following configurations
Download MongoDB
Please note, when you install MongoDB 3.6 or above, it comes up with Curl library of "libcurl4" version and which has some compatibility issues on ubuntu 18.04
Due to this, you will end up resulting following output when try to execute "mongod" command:
mongod: /usr/lib/x86_64-linux-gnu/libcurl.so.4: version
`CURL_OPENSSL_3' not found (required by mongod)
To fix this problem, you need to uninstall "libcurl4" dependent library by using the following command
sudo apt-get remove libcurl4
Then need to install back lower curl lib version (i.e. "libcurl3"), as mongo expects it on ubuntu version "18.04"
sudo apt-get install libcurl3
You may need to use "sudo" to fork the data and log directories with the installation if it fails with the manual steps
sudo mongod --dbpath /var/lib/mongo --logpath /var/log/mongodb/mongod.log --fork
you can run "mongo" command now to see the mongo shell running.
It works for me.
I was facing a libssl1.1 issue when trying to install mongo-db in Pop!_OS 22.04 LTS (or Ubuntu 22.04 LTS).
Go to http://archive.ubuntu.com/ubuntu/pool/main/o/openssl
Find the exact version of libssl for example libssl1.1.1
wget http://archive.ubuntu.com/ubuntu/pool/main/o/openssl/libssl1.1_1.1.1-1ubuntu2.1~18.04.20_amd64.deb
Then install
sudo dpkg -i libssl1.1_1.1.1-1ubuntu2.1~18.04.20_amd64.deb
Hope this helps others who are trying to do the same.
The issue is referenced in https://github.com/dotnet/sdk/issues/24759.
All credit goes to #feisalramar.
Just run the command sudo apt install mongodb it will install the mongodb, because mongodb is now part of ubuntu repository. After installation run command sudo service mongodb start to start the mongodb server. Then if you run command mongo it will give you shell helper. To see the existing database use command show dbs. After successfull installation you will find there pre existing database names are admin, config, local. Use command db to see which database is currently running on server, there will a database named test or somthing. To add a collection (tables on SQL DB) just use the insert command with an initial document (row in SQL DB) information db.data.insert({"username":"Brad Pitt"})
In previous command data is my collection name.
Now to see all documents in data collection just use command db.data.find();
Other commands:
sudo service mongod status, sudo service mongodb stop, sudo service mongod restart ,sudo service mongod stop.
For more information, you can visit https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu/
;
For me on Pop_OS Linux 20.04 LTS helped:
$ sudo apt-get purge mongodb*
Then creating /etc/apt/sources.list.d/mongodb-org-4.4.list file for Ubuntu 18.04 (Bionic) via this command:
$ echo "deb [ arch=amd64,arm64 ] https://repo.mongodb.org/apt/ubuntu bionic/mongodb-org/4.4 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-4.4.list
instead of Ubuntu 20.04 (Focal)
After that install mongodb-org:
$ sudo apt-get update
$ sudo apt-get install -y mongodb-org
And start mongodb service:
$ sudo systemctl start mongod
This issue is only on Ubuntu 22.04,
Try this out:
echo "deb http://security.ubuntu.com/ubuntu impish-security main" | sudo tee /etc/apt/sources.list.d/impish-security.list
sudo apt-get update
sudo apt-get install libssl1.1
Try this, I successfully find this out
$ sudo apt-get install -y mongodb
I'm trying to un-install grafana 4.6.3 from Ubuntu 17.10, but is not possible. So far i have tried
sudo apt-get remove grafana , sudo apt-get remove --auto-remove grafana
and says Unable to locate package grafana.
Also tried to install it again from ubuntu software in order to unistall it properly but then pops me up an error message says: Unable to install grafana snap "graphana" is already installed. I installed it first time from ubuntu software.
What can i do to un-install it?
Have you tried dpkg?
sudo dpkg --remove --force-remove-reinstreq <packagename>
If apt won't remove it try using dpkg.
You could also try and clean up your apt utility.
sudo rm -rf /var/cache/apt/archives/<package_name.deb>
sudo apt-get autoclean
sudo apt-get update
sudo apt-get upgrade
I want to install rdkafka
Upon running the command as per the instructions: sudo pecl install rdkafka
I have installed pecl using the command:
sudo apt-get install php-pear php-dev
Quick Install Steps:
Step 1 Install PHP pecl and pear commands:
sudo apt install php-pear
Step 2 Install librdkafka
sudo apt-get install -y librdkafka-dev
Step 3 Install PECL-package
sudo pecl install rdkafka
Step4 Enable PHP-extension in PHP config. Add to php.ini
extension=rdkafka.so
Step 4 Restart apache server
sudo service apache2 restart
Before doing that install librdkafka . linux command sudo apt-get install librdkafka . After that try the same command as you mentioned using pecl. Hope it should work.
For more detail use this link: https://arnaud-lb.github.io/php-rdkafka/phpdoc/book.rdkafka.html
What's the best way to upgrade Visual Studio Code on Linux Ubuntu?
For the time being I was periodically getting the newest version (.deb) from their official site: https://code.visualstudio.com/
sudo dpkg -i code_*.deb
Visual Studio Code enabled official Linux repositories on February 2017 (v1.10)
sudo add-apt-repository -y "deb https://packages.microsoft.com/repos/vscode stable main "
sudo apt update
sudo apt -y install code
You can upgrade / dist-upgrade as usual
sudo apt -y upgrade
sudo apt -y dist-upgrade
[1]: download the latest vscode (.deb) package to your computer on this
link :
https://go.microsoft.com/fwlink/?LinkID=760868
, or this there :
https://code.visualstudio.com/docs/
[2]: then open a terminal in the folder where you downloaded the .deb file and write:
sudo dpkg -i <the downloaded file>.deb
[3]: finally if you have apt-get do (if not install apt-get first):
sudo apt-get install -f
If you have installed it via the repository, exit VS Code then just do:
sudo apt update
sudo apt install code
This is the same command to install or upgrade to the latest version. You can see the version with:
code --version
Now the easiest and recommended way is to use snap:
sudo snap install --classic code
And updates are supposed to be automatic.
This works fine in ubuntu.
sudo apt-get update
sudo apt-get install code
When you install VSCode with the file .deb on Ubuntu 20.08, first, remove it:
sudo apt-get remove code
Add the repository in this link https://code.visualstudio.com/docs/setup/linux
wget -qO- https://packages.microsoft.com/keys/microsoft.asc | gpg --dearmor > packages.microsoft.gpg
sudo install -o root -g root -m 644 packages.microsoft.gpg /etc/apt/trusted.gpg.d/
sudo sh -c 'echo "deb [arch=amd64 signed-by=/etc/apt/trusted.gpg.d/packages.microsoft.gpg] https://packages.microsoft.com/repos/vscode stable main" > /etc/apt/sources.list.d/vscode.list'
Udate the package cache and reinstall
sudo apt-get install apt-transport-https
sudo apt-get update
sudo apt-get install code
In the next time when you want to upgrade, just do:
sudo apt-get update
sudo apt-get upgrade code
Because your repository is missing information to upgrade VSCode, the above solution will fix it.
This is what I did to avoid the annoying message:
Remove vscode, if you already installed it.
sudo apt-get remove code
Add repositories, update and install:
sudo add-apt-repository -y "deb [arch=amd64] https://packages.microsoft.com/repos/vscode stable main "
sudo apt update
sudo apt -y install code
If you have already installed VS code, go to the terminal and type two different commands:
sudo apt update
sudo apt-get upgrade code
The following commands work for me (for Linux) :
wget 'https://code.visualstudio.com/sha/download?build=stable&os=linux-deb-x64' -O /tmp/code_latest_amd64.deb
sudo dpkg -i /tmp/code_latest_amd64.deb
Place those two commands into an executable Bash script called auto-update-VSCode, and you can simply run that from your shell any time Visual Studio Code says it's out of date.
I'm running Ubuntu 20.04 and this worked perfectly for me:
$ wget https://vscode-update.azurewebsites.net/latest/linux-deb-x64/stable -O /tmp/code_latest_amd64.deb
$ sudo dpkg -i /tmp/code_latest_amd64.deb
Best way to update Vscode in Ubuntu:
sudo apt-get update
sudo apt-get install code
sudo apt-get update
sudo apt-get install code
I am having trouble uninstalling mongo from a 64 bit EC2.
In /usr/bin I have mongo and mongod amongst others.
When I type mongo from anywhere it opens the shell at version 1.8.
I now downloaded 2.0.2 and in that folder when I run mongo it opens up version 2.0.2
My question is how do I purge mongo fully so I can install 2.0.2 without coming across the old 1.8 version?
EDIT: I believe I used yum (it was a while ago), and I think the ec2 is fedora.
1.Stop Mongo DB using -
sudo service mongod stop
2.Remove Packages using -
sudo yum erase $(rpm -qa | grep mongodb-org)
3.Remove Data Directories using -
sudo rm -r /var/log/mongodb
sudo rm -r /var/lib/mongo
yum erase mongo-10gen mongo-10gen-server
I needed to run a yum list installed | grep mongo then yum remove those packaged
This should work
rpm -qa | less | grep mongo
using that command will give you the mongo packages you have installed, after that you can do
rpm -qa | less | grep mongo | xargs yum remove // <-- this will remove all packages automatically
but can also remove all of them Manually
this gets the job done easily
sudo yum erase mongodb-org*
First stop the mongo service
sudo service mongod stop
Then remove the packages
sudo yum erase $(rpm -qa | grep mongodb-org)
Then remove the log(data) directories
sudo rm -r /var/log/mongodb
sudo rm -r /var/lib/mongo
For Ubuntu users:
First, stop the service of MongoDB and then try uninstalling mongod.
Then, type these commands to uninstall mongodb:
sudo apt-get purge mongodb mongodb-clients mongodb-server mongodb-dev
sudo apt-get purge mongodb-10gen
sudo apt-get autoremove
I used dnf command to list and uninstall mongodb from my EC2 servers (RedHat Enterprise Linux 8). Hope this helps for the RHEL8 users.
DNF_ is the next upcoming major version of YUM_, a package manager
for RPM-based Linux distributions. It roughly maintains CLI
compatibility with YUM and defines a strict API for extensions and
plugins.
For further reading about DNF usage...
https://dnf.readthedocs.io/en/latest/command_ref.html
To list down the mongodb installations (Use sudo if required)
sudo dnf list installed|grep mongodb
To uninstall/remove mongodb
sudo dnf remove mongodb-org
Then run the list command again to see if the installation is successful. It shouldn't show any mongodb-org packages if the uninstallation was successful.
sudo dnf list installed|grep mongodb
I think yum remove mongodb should do the trick.
First Stop the service of MongoDB and then try uninstalling mongod.
you can uninstall mongo db by this code
Uninstalling existing MongoDB packages
Since I'm not 100% what you've got installed, I suggest the following to make sure everything is uninstalled:
sudo apt-get purge mongodb mongodb-clients mongodb-server mongodb-dev
sudo apt-get purge mongodb-10gen
sudo apt-get autoremove
Steps to uninstall MongoDB:
sudo apt-get purge mongodb mongodb-clients mongodb-server mongodb-dev
sudo apt-get purge mongodb-10gen
sudo apt-get autoremove
Type which mongo This will show the executable path. Delete all the mongo related binaries in that path, then install the new version and copy all those binaries to /usr/bin directory. After this you will be able to access it without any issues.