I am having a data set inside my Eclipse PyDev project that represents about 8 million single .json files. Apparently Eclipse PyDev tries to do something with those files. I'm not sure what Eclipse is doing but it definitely is doing something.
How can I tell Eclipse to leave those files alone and not try to index or parse it because it slowly kills my CPU?
Well, PyDev itself should do nothing with those files, but if there are other plugins (such as EGit) that could explain it...
Anyways, Eclipse itself will at the least index the resources by default.
A workaround here may be dealing with Resource filters: inside the PyDev Package explorer select the parent folder, Alt+Enter to see its properties (or right-click > properties) then select Resource > Resource Filters and add the filter to exclude those .json files.
Related
In Eclipse I have two maven projects A and B, where A is a parent for B. The directory structure is the following:
A/pom.xml
A/B/pom.xml
A/B/...
Then I use File search (Ctrl+H) to find any file in the project B. The search result window shows the file two times with different relative paths:
A/B/<my_file>
B/<my_file>
So, the same file is shown twice. Obviously, the first search result is reduntant. Is there a way to exclude these duplicate search results?
What I personally do to avoid this is marking each module in the parent project as derived (right-click on the folder > properties > Attributes: Derived).
Then when you perform a file search, uncheck "Consider derived resources" (I don't think it is checked by default) and you won't get the A/B/<my_file>.
The only inconvenience is that you must do this for each module, and each time a new module is added.
In an open resource window (cntrl+shift+R), click on the arrow on top-right and check "Filter Duplicated Resources". This worked for me.
Checking Window -> Preferences -> Maven -> Hide folders of physically nested modules (experimental) worked for me in Mars.1 Release (4.5.1).
After checking it I closed all projects within eclipse, deleted eclipse project files (.project, .classpath and .settings) and reimported my maven projects.
I had similar problem.
My solution for this problem was
Create eclipse "working set" of projects to search
Set this working set as option into search dialog
Search in it
Windows - Preferences - Maven - Hide folders of physically nested modules
I agree with Damon Horrell.
Go to Windows - Preferences - Maven - Hide folders of physically nested modules (make sure the checkbox is checked).
Note: Make sure to re-import the maven project into eclipse to see the changes.
Within the parent project, child ones were already visually hidden in my case, but still found through search and Ctrl-click links.
I solved this by using Resource filters:
Right-click (parent) project > Properties > Resource > Resource Filters
Click Add Filter..., select Applies to -> Folders and enter one child project's folder name, click OK
Repeat 2. for all child project folders
By the end, you should have something like this:
There is an ancient bug which requests Eclipse to support nested projects. Opened 2008, won't happen soon, I guess.
Since Eclipse doesn't support Maven's default nested module layout, you have to import each module individually which doesn't confuse Eclipse but it can confuse you as you can see in the search results. Similar things happen when you start to save launch configs in a module.
There are several possible solutions:
Get used to ignoring half the search results. Takes some discipline but no magic.
Make sure your root project doesn't contain anything important that you might want to open from Eclipse (i.e. move the parent POM to a new module which must be a child of the root project). Now you can close the root project.
Takes some discipline where to put things in your project and it's clumsy when you have to add new modules.
Use the flat multi-module approach. This is an extension to #2, it looks odd and there might be plugins that are offended by that. So if you use a lot of nonstandard plugins, you should check whether they like the new layout.
As a new joiner, still couldn't comment but I'd really like to add something to the best answer. It works! It not only removed the duplicate files for me (one from child module and one from parent module), it also removed the class files from parent module).
But it added the folder to my .gitignore which will cause problem for new files/directories added later. I just reverted the change to .gitignore and it still works in eclipse.
Find this answer to disable auto change of .gitignore
EGit and Eclipse modifies .gitignore file but it should not
You can solve this problem using a flat multi-module approach.
Caveats may apply if you're using the maven-release-plugin with a version control system other than Subversion.
In addition to "Hide folders of physically nested modules" mentioned, you could uncheck parent modules when importing Maven project:
I'm having trouble getting Eclipse to index my source code. I'm using Eclipse Helios on Windows XP at the moment.
I have a directory called src. Within it, I have a bunch of dirs, something like this:
src
-include (common headers)
-lib
-libIO (source code for this library)
-libGUI (source code for this library)
-pgms
-pgm1 (source code and headers for this pgm)
-pgm2 (source code and headers for this pgm)
Each leaf has its own Makefile. There is no top-level Makefile in src. pgm1 can and does include files from include and lib/libIO and lib/libGUI.
Basically, I want Eclipse to index my entire src directory, without having to set up a C/C++ project for every leaf in my tree. I can't seem to find a way to make this happen.
Here's my symptoms; what I'm trying to solve for:
When editing source in the pgm1 dir, it references functions that are declared in my include dir header files and defined in source files found in lib/libIO.
However, when I press F3 to get to the declaration of a function, Eclipse says "Could not find symbol 'X' in index". I can't seem to get Eclipse to find either the header declaration or the source definition for the method under my cursor (like the Java module does perfectly). Is this possible?
I had exactly same issue as OP but for some reason the menus in Eclipse I was using (Helios Service Release 2) were not "Go to Properties -> C/C++ General -> Paths and Symbols -> Source Location.".
The way I fixed the issue was :
in C/C++ view, right-click on top project name;
in the menu, select New->C++ Project;
in the window that appears, select Convert to and then select C++ project;
click OK to close the window.
Eclipse will start indexing right away. Depending on the size of source tree it may take a while but you will have the indexing working finally after that.
I faced similar situation. I solved it in this way: right-click the project in project View-->select Index-->rebuild.
I managed to solve this thanks to comments here.... I ended up recreating my project. I used the Import method to download a project from CVS, and told it to use the New Project wizard to do so. When I got the New Project dialog, I told it this was a C++ Project, and the indexing now works fine.
I still wish I could index files without having to attach a specific project type to it, but at least I found an answer.
Thanks for the help all.
Exit Eclipse. In workspace go to ".metadata/.plugins/org.eclipse.cdt.core" and delete everything in there.
in the project explorer panel, right click the project you want to re-index, then select index, then select the action you want
Indexing of files and variables under different flags is always complicated when we have a huge project, lot of files and more importantly lot of different build options. I prefer playing around with the Indexer option to help me browse the entire code.
You can find it : Project Properties>C/C++ General/Indexer.
You can choose "Enable project specific settings"
Then it's up to you to choose the options you want for your project.
For a particular build we can choose "Use active build configuration" so that only the files and MACROS are considered which are used by the build script.
Or Index all source files in the entire project.
I am using Eclipse Neon 3, here's the solution that worked for me :
go to File
New
Convert to C/C++ Autotools project
then select your project and finish.
It can take some time to finish indexing, it depends on your project size.
I have experienced problems with the indexer of Eclipse Luna when there was an unresolved friend declaration in the class declaration - it seems then that the indexer skipped indexing the rest of that class, and all references to it was shown as unresolved by the indexer.
Solution: removed the unresolved friend declaration (in my case, it was legacy code that was no longer needed).
Please try the following (my project is set up differently, so I am not sure this will work for you).
Go to Properties -> C/C++ General -> Paths and Symbols -> Source Location.
Do you see your source folder there?
I observe this behavior:
When I add a source folder and then exclude it from build, it disappears from the above list. After that the folder is no longer indexed. Re-adding it to "Source Location" solves the problem: the folder is now indexed; remains excluded from build (as intended); is visible among source locations.
I believe it is a bug -- excluding a source folder from build should not remove it from source locations list.
In Coocox IDE (Eclipse + gcc) the problem is resolved by going from file menu
Edit > Preferences > C/C++ / Indexer > Build configuration for Indexer set to Active build configuration and the rebuild the project (Ctrl R).
If the project is already converted to C/C++ and still the index is not working you can right click on the project and Index and rebuild. The project will start indexing right away.
I am using
Eclipse IDE for C/C++ Linux Developers
Version: Helios Service Release 2
Build id: 20110218-0911
I followed the suggestions above and in addition I had to mark all referenced projects (with in the work space) using project properties->Project references
The following has worked for me in Eclipse Neon:
New Project -> C/C++ -> Makefile project with existing code -> Next. Then Navigate to the code and finish the project creation. Indexing starts automatically.
First, Eclipse is not my native IDE -- I'm barely a n00b with it. I set up a project in a workspace that was actually in the directory of another client's project (I didn't really follow the whole workspace/project thing) and, in fact, now I can't even find the Eclipse workspace file to open it.
What I'd like to do is:
Open my eclipse project (/workspace?) -- I know where all the files are on disk, just not what to open in order to see them in Eclipse -- and
Move my project to a new workspace, which I guess I will put in a generic Eclipse-y place, and have that one workspace reference all my Eclipse projects.
(Is that the right way to do it? Does Eclipse dislike me being a one-project == one-workspace kind of guy?)
Please educate me regarding The Eclipse Way so that I can get back to work writing code.
Thanks!
Roughly a workspace (which is a directory) in Eclipse contains:
configuration (installed JRE, Servers runtimes, code formatting rules, ...)
one or more projects
You can of course have as many workspaces as you want (but only one can be opened at a time) and a project can also be part of different workspaces.
If you know where your sources are and want to move them to a new workspace here is a possible solution:
Start Eclipse and when prompted for a workspace choose where you want the workspace to be created (if directory doesn't exist it will be created). For example you can choose C:/Dev/Workspace/.
If you are not prompted, go to File->Switch workspace->Other
Once you are in your workspace you can import your exisiting project with File->Import then General->Existing Projects into workspace
Navigate to the folder containing your project sources, select your project and click finish
I don't know if it's a best practice or not but what I usually do is the following:
I have one workspace for each of my customer (workspace_cust1, workspace_cust2)
Each workspace references my commons library projects and add client specific projects
This way each time I change my commons library it's up to date in every workspace.
If you want to apply
one workspace = one project
You could to the following:
1) Copy the eclipse desktop shorcut
2) Modify the shortcut by appending "-data workspaceLocation "
How can I stop Eclipse (Helios) and m2eclipse plug-in to hide last dotted part of folder names when importing existing maven projects into workspace?
While importing existing maven projects into workspace, that window where I select the root folder for the import, those folder names are truncated. The last dot separated part of the folder name is removed. If I have lot of folders named like "com.acme.project1", "com.acme.project2" and so on, then Eclipse shows only bunch of folders having name "com.acme". I cannot figure out which one is the correct one without opening Windows Explorer and browsing the same location and checking out real names of those folders.
I'm not sure if that is problem with m2eclipse plug-in or if it is problem with Eclipse. I don't remember seeing that problem with previous Eclipse versions.
Can anybody help? This is really annoying me.
Most likely you have Hierarchical package presentation switched on. On your Package Explorer view, on the top right dropdown switch to > Package Presentation > Flat in order to see com.acme.project1 and com.acme.project2 presented the one under the other in the Package Explorer.
I have a rather large project which contains a number of third-party dependencies which are linked via svn:externals. These include tomcat and blazeDS, which are packaged by our installer via ant. The problem is that these projects contain dozens of sample JSP pages, and eclipse chokes on them when trying to build the project, producing hundreds of errors.
Our project setup is something like this:
src/
main/
test/
third-party/
blazeDS/
tomcat/
etc.
Now, in eclipse, my project's build path is set to only include subfolders in src/main and src/test. Yet, for some reason, it still tries to build everything beneath third-party. I have clicked on third-party and selected "remove from build path", but this had no effect. I even tried adding the third-party folder to the build path, and then excluding "", "/*", and "**/*.jsp", but again, to no effect.
What is going on here?
Edit: Thanks for the suggestions, though unfortunately, they don't seem to fix the issue. I don't have the CheckStyle plugin installed (I'm using Eclipse 3.4.1 with the only custom plugins being subclipse and flex builder), and I tried disabling all extra builders except for Java, but the errors are still being thrown.
I usually have this kind of issue with CheckStyle plugin, where you need to specify in its properties (right-click on project -> Properties -> CheckStyle):
"Exclude from check Files non located in a source directory"
Otherwise it does analyze (and reports warning/errors on) files which are not candidate to be compiled in the first place.
Couple of other suggestions:
try restarting your eclipse with the -clean option (eclipse software version of 'did you reboot it ?' ;) ). Beware it can reset your workspace perspectives, so you may want to try that with a copy of your workspace instead.
try deleting your project (your workspace reference of your project, not its actual content), and reimporting it (beware of your custom launchers, they may get removed in the process).
check if you do not have any linked directory within src or test, which would point to thirdparty(/**): that would explain the unwanted compilation.
It could be that your eclipse project is configured to have extra Builders. You can check that in the project's properties (right-click on project -> Properties -> Builders).
In my case it was because there was a reference to the file (which I had excluded from the build path) in another file which was in the build path. I wanted to exclude SegModel.hpp from the build path, but in another file, I had specified template short K::KEstimate<SegModel>(SegModel& m, short stepCode);