VSCode Creates an automatic breakpoint that I can't delete - visual-studio-code

I've created a basic node app following the steps described here - https://code.visualstudio.com/Docs/nodejs
Every time I run/debug (hit F5), VSCode automatically breaks at line 2 of this auto created debug file. The weird part is there is no breakpoint set.
I can continue past this and everything runs a-okay after, but it's super annoying to stop here every single time
Any ideas on getting rid of this? I've poured through the settings and nothing obvious stands out.

There is an option in the launch.json file called "stopOnEntry" (You can access the file by hitting the Configure icon on the Debug panel). Set it to false and it should solve your problem.

Related

Attaching to proccess in vsCode debug is bugged

When I attach to my proccess via vscode debug It just stuck and I can not to terminate it, can not to reload it / pause / stop, everything. The breakpoints is not working, the debug will not stop on a breakpoint when should...
I can't start another debug process, can't attach to another one. It's just stuck and I have only one option - close vsCode
The problem is only with attach proccess in debug. Everything else working fine...
Buttons aren't working, nothing happens while I turn off vsCode completely
Tried to change variables in launch.json etc. Nothing changes
All worked fine in evening last month, next day the debugger is dead like that.
My launch.json setting for attaching

why there is no selection when I click F5 to run program in vscode

In the begin, for example, I'd like to run program by click F5, and there is a selection box on the top of vscode. However, maybe I click some errorly, it debug directly, and no selection here, and the terminal shows (base) in the front of result, why and how to correct to original setting?
One way to reset VS settings as follows:
Note: Please use save as to backup settings.json in case you have something that you may need to restore later.
DO NOT DELETE ANYTHING FROM YOUR "defaultSettings.json"
These instructions are only for clearing out everything except {
} within your user settings.json:
The easiest way to reset VS Code
back to the default settings is to clear your user settings.json file
contents in the Settings editor. Delete everything between the two
curly braces, save the file, and VS Code will go back to using the
default values.How can I reset my user settings?
If following above does not resolve your issue, please consider adding a screenshot of the issue along with your posted question and/or add default settings.json, so it can be compared with a working default settings.json file for your assistance.

Why is Vscode Cmd+R Start Debugging doesn't work

I'm trying to assign Cmd+R to Debug/Start Debugging on Vscode (1.33.1).
Cmd+R had an initial assignment to Reload Window so I removed it. Then when I pressed Cmd+R it started waiting for the second keystore. I went to keyboard shortcuts again and removed all two-key occurances that were present (that were causing a wait for a second keypress after R).
Now when hit Cmd+R, I see the Debug / Start Debugging highlight briefly on menu bar, which means that the menu item is invoked:
However, nothing happens. It doesn't start debugging (nor waits for a second keypress) When I manually click the same command, it starts perfectly.
What is going on, and how can I make my key assignment work?
As stated in the comments above, the command was assigned to another shortcut (something other than Cmd+R), and it worked. It was also suggested to restart the IDE.
Note: After the the command was reassigned, it was changed back to Cmd+R and it worked fine.
Super weird. After following Corné's suggestion I've assigned it to something else (cmd+option+shift+1). It worked. Then, I've changed it back to cmd+r and it suddenly started working with cmd+r too. It was probably a nasty Vscode bug.

Running my program from PyDev with one click?

I am developing using the PyDev plugin in Eclipse. My program uses several classes in several files. I usually run the program using the green "play" icon or using Control+F11. The only problem is that it will run the file, which is currently in "focus". Usually this is not the one containing the starting point of my application. As I run my program something like 200 times a day, this means that I need 200 extra click on the mouse and often forget about this.
Is there any way of setting the default file to launch?
Yes, change the launching to rerun the last launched, so Ctrl+F11 will launch the last one -- and use F9 to launch the one with focus -- See instructions and details at: http://pydev.org/manual_101_run.html
For me, the shortcut is Ctrl+Shift+F9. I don't think I've changed any keybindings, so its strange that it would be different from the official documentation.
Go to Run->Run History, and select the run that is your 'main' run. Now you should be able to use Ctrl-Shift+F9 from any other file to rerun your main. If it isn't Ctrl+Shift+F9 for you, look on the console window that should be at the bottom of your screen showing the stdout after every run. There is an icon on the top of it that has the green start arrow with a yellow arrow underneath it pointing to the right. That is the command to relaunch with the same configuration. If you hover over that, it should tell you the keyboard shortcut you need.

Eclipse doesn't stop at breakpoints

Eclipse 3.5.2 is not stopping in breakpoints. It's as if the debugger is using an older version of the source file.
Tried the usual refresh, clean all projects, build all, with no change.
Already in debug mode and the break point is checked.
*ok ended up deleting the whole project and checking it out again. but still curious what the issue was.
Perhaps you have pushed the Skip all Breakpoints button in the Breakpoints view.
Thanks guys, this really saved my day too.
I antecedently pressed on skip break points, if you did the same this will result on break point appearing with a backslash icon on them.
To bring it back to normal:
Switch to Debug perspective.
press on the breakpoints view tap -->> upper right hand corner of the screen, you also can go there by Window->show view-> breakpoints.
5th icon from the left you will see break point with backslash. press on that one.
To confirm, try putting break point on any line, and it should appear normally.
Press Ctrl + Alt + B
OR go through below steps
Clearing all Breakpoints fixed the issue
(within debugger perspective: Window -> Remove All Breakpoints).
Rebuilding the project did not work for me.
Sometimes you do start the debug mode but the debugger doesn't actually get attached/gets detached. I've also had this issue a few times when my laptop was reacting really slowly.
A reboot always solved it for me.
Also try doing a clean all (works miracles in Eclipse).
Please un check this from the Eclipse Menu.
Run->Skip all breakpoints.
I think this will be enabled permanently once You select the Remove all Break points option in the Debug/Breakpoints window.
Performing a "Clean All" worked for me.
Click on "Project" tab --> "Clean" menu-item.
In the "Clean" dialogue-box select "Clean all projects" radio-button. Leave the remaining values as default. Click "OK" button.
BINGO!!!The remote-debugging started working for me as beautiful as before.
It has also happened to me, in my case it was due to the GDB launcher, which I needed to turn to "Legacy Create Process Launcher". To do so,
either change the default launchers to the "Legacy Create Process Launcher", in Windows>Preferences>Run/Debug>Launching>Default Launchers.
or choose this launcher in the debug configuration of your application (Run>Debug configurations>choose your debug configuration). Under the "main" tab at the bottom, click on "Select other...", check the box "Use configuration specific settings" and choose "Legacy Create Process Launcher".
I had a conditional break point wrongly put on the method entry point. Removed that breakpoint and it worked.
Note: Tried Skip all Breakpoints, Clean all projects, Refresh, close Eclipse with no luck before nailing it.
In my case, somehow the breakpoints got automatically disabled because of this switch turned on, skip breakpoints.
Breakpoints have seemed to work and not-work on the versions of Eclipse I've used the last couple years. Currently I'm using Juno and just experienced breakpoints-not-working again. The solutions above, although good ones, didn't work in my case.
Here's what worked in my case:
deleted the project
check it back out from svn
import it into Eclipse again
run "mvn eclipse:eclipse"
Since the project is also a Groovy/Http-bulder/junit-test project, I had to:
convert the project from Java to Groovy
add /src/test/groovy to the Java Build Path (Source folders on build path)
include "**/*.groovy" on the Java Build Path for /src/test/groovy
I had all breakpoints enabled and configured as I should. But whenever I clicked "debug" it would only step through the program (press f5/f6) Turns out there was a rogue setting
Right Click project > debug configurations > "Debugger" tab > uncheck "Stop on startup at:" box
One reason for this situation can be, that you have pressed 'skip all breakpoints', when play- and another pictures are smaller than those normally are (because of higher resolution screen). Another thing can be, that break points are stopped only under VM threads, not under normal threads!
Go to (eclipse-workspace)\.metadata\.plugins\org.eclipse.wst.server.core and delete all tmp folders.
Clean and Restart server.
In my case I had to enable then disable an option in the Preferences.
I don't prefer the debug view to keep jumping when a breakpoint is hit so I disabled this option, but caused the issue in question.
The solution was to enable it again, start a debug session, the breakpoint is hit and shown in the UI, then disable again the option.
Looks like a bug in Eclipse 4.17
UPDATE
There is also another simpler way that will make Eclipse show the debugging highlight at the breakpoint or rather refresh the debugging UI to work as it should. After the breakpoint is reached, Eclipse will ask you to switch to debugging mode if you are not already in, click switch button, then activate the debug tab/view, you will notice that the stepping buttons are activated and the breakpoint line is highlighted.
First remove all 'toggle breakpoints' from the class file.
Then Eclipse requires a restart.
Then make sure 'Skip All breakpoints' is NOT enabled. If it is, make it disabled.
Then, add toggle breakpoint to the lines in your file and run on Debug mode.
A pop-up window must appear to confirm if you really want to Switch to debug mode. Say Yes and proceed.
I suddenly experienced the skipping of breakpoints as well in Eclipse Juno CDT. For me the issue was that I had set optimization levels up. Once I set it back to none it was working fine. To set optimization levels go to Project Properties -> C/C++ Build -> Settings -> Tool Settings pan depending on which compiler you are using go to -> Optimization and set Optimization Level to: None (-O0).
Hope this helps! Best
I had the same problem, and I found the real cause.
I had written some concurrent / multi-threads code, while I added some breakpoints inside the code running in a new thread. So, when JUnit tests ran over, and stopped soon, the code will not reach and stop at the breakpoints.
For this situation, we have to click and select "Keep JUnit running after a test run when debugging" check box at "Debug Configurations..."
switching workspace worked for me.
Go to File > Switch Workspace and choose different folder (workspace)
That's it and BINGO! Debugging started working for me as beautiful as before.
go breatpoint and click on 5th to eclipse->window>->show view->other->debug->breakpoint and click on 5th option (Skip All Breakpoints)
Make sure, that you are using the correct JRE version to debug your project. Especially if it's a third party project.
Also make sure, that there is no trigger point set for any breakpoint.
I had the same problem when I was using Eclipse Juno.. I installed Eclipse Indigo and it works fine. Try to reinstall eclipse.
A different solution worked for me. I also faced the same problem - debug points were not being updated, though they are shown correctly in the IDE editor and in Break Points tab.
My problem and solution are: While creating the project, the 'Default Output Folder' points to different location. At a later stage, I have mavenized the project, selecting "Project Right Click - Configure - Convert to Maven Project". So there are two sets of output folders exist in my project file system. Cleaning the project multiple times did not solve my problem. In the background it was pointing to different binary files. Finally, when I removed the Maven Feature and cleaned the project, this time everything worked fine. Env: Eclipse Juno and JRE is J2SDK 1.5.
I get all breakpoints skipped and marked as warnings when using -O2 in the compiler flags. Switched to -O0 -g in my makefile and breakpoints now work. Hope this helps.
If it doesn't stop even after unchecking SKIP ALL BREAKPOINTS, you can add this android.os.debug.waitfordebugger just before your breakpoint.
If you do this,your app will definitely wait for debugger at that point everytime,even if you are just running your app,which it will only find when your device is connected to eclipse.
After debugging you must remove this line for app to run properly or else android will just keep waiting for the debugger.
Try to restart eclipse, that works sometimes. I guess there is some kind of cache there.
In my case the debugged code in JBoss was older than the code in the Eclipse project. Rebuilding the .war solved the problem.
Facing same problem with Eclipse Luna.
Project clean didn't work.
Rebuild didn't work.
What makes it work is uninstall the app on the device before each debugging.
I use the Eclipse FileSync plugin for live remote debugging. Make sure you tick Allow different target folders & edit the Target folder file setting in the tree view.
Setting the Default target folder by the Browse... button without Allow different target folders will set all folders to the same target (I had both libs & classes set to the default for libs so my breakpoints did not update).
Since Eclipse 4.7/Oxygen released in June 2017, there is a new concept of "Triggers for breakpoints", which is displayed as a small "T" next to the breakpoint "blue bullet" icon.
All the other breakpoints that are initially suppressed by triggers
will be hit only after any of the trigger points has been hit. All the
triggers are disabled after a trigger point is hit and will be
re-enabled after the run.
In order to reset all the "trigger" flags, you need to do the following steps :
Switch to Debug perspective.
Right-click in the "Breakpoints" view
Select "Remove All Triggers".
Note : this step does not delete all your breakpoints, which occurs when selecting "Remove All" in the same contextual menu.
Note : the keyboard shortcut to enable the triggers is "Alt-R", which takes precedence on the shortcut to open the "Run" menu with its mnemonics, when the "Breakpoints" view is selected.