Is there a way to remove multiple courses at once?
It seems I can only do this one by one.
Perhaps there is a better way, but I haven't found anything yet.
Without writing any code, the easiest way to delete multiple courses is to:
Create a category (e.g. called 'delete me')
Select multiple courses and move them all into this category
Delete the category and select 'delete all' (rather than 'move to another category')
Related
I'm trying to create a form to fill three tables to describe some projects with the 'Title of the project' as common field. When I create the form I have to write the title three times, otherwise it's not posible to fill the tables. Is there any way to put just one of the three fields on the form but the three of them are filled?
The database is empty, I want to make a form to start introducing all the projects that are going to be done in my group of work. In one table there are data related to the project, like start dat , full budget etc. In another one the information about my company, like the group its doing it, its role etc. In the last one just some general information like related tags. The name of the project appears in all of them, but when I do the form from a query they seem not to be related even if I do it on the query.
I've already tried to do it with the Wizard tool, selecting the different tables and its fields. I also tried to check the form properties...but I can't come up with what I'm doing wrong...
I'm new using access...
I have two tables in one MySQLI database. One is called 'actions' and one is called 'links'. But recently I have noticed that many links which I have transfered from my old system don't have any actions attached to it, and I want to count how many they are. So I want to count the amount of links whose id hasn't any entries in the actions table. How can I formulate the statement. There is one id in the links table and one link_id in the actions table.
You are looking for a outer join. without a lot of details, it would look something like:
SELECT * FROM links
LEFT JOIN actions on links.field = actions.field
WHERE actions.ID is NULL;
This will give you all the links records that don't have a corresponding record in actions.
I'm operating in Word 2013 and 2010, so I can use code that works in either. I'm trying to create a word document to keep track of my recipes. At its most basic I want to have a TOC that updates based on headings. I also want it to have any category I want (eg: Appetizers, Drinks, Entrée, etc...) ordered alphabetically. Under each category I have tables. Each recipe gets a table that has it's name, directions, notes, tags, and potentially a picture. The second cell has another two column table inside of it that contains the quantity and name of each ingredient necessary for the recipe.
I have all of that so far and I'd like to automate adding new categories and recipes. Currently, I have to find the category, then scroll down to find where the name goes alphabetically and insert a quick table I made. I then fill in the info.
I'd like to be able to search the document for each category name, then insert the new category wherever it belongs, with a space before and after it. I found that my tables give me trouble if I don't have a space between everything. It tries to pull anything it's touching into the table and merge them.
I wanted to give the backstory, so you'd know where I was going to go eventually and could provide help that fits better with what I need. After I can add a new category, I plan to use vba to organize each table alphabetically by the name in the first cell of each table. It will also help when I start adding sorts to it. Eventually, I'd like to be able to sort it to say, only display recipes from a certain person, or display my frequently used recipes. I'd then have it either hide all the others or create a new doc with just these. So thanks for the help. Below I'll post the code I most recently tried. I tried a few other variations of this same code and keep getting an 'expected end of statement. I've gotten other errors when trying other variations of it, but this is the best I can come up with on my own.
Private Sub UserForm_Initialize()
For Each cat In ActiveDocument.Styles = "Heading 1"
lstCat.AddItem (cat)
Next
End Sub
I have a form called frmAddCategory I'm using as a test. I was going to have a listbox lstCat to show every category with the style heading 1. I have a textbox called txtAdd to type new ones and a cmdAdd button to add it to the form.
Edit: I've been playing around with my macro recorder after finding out about outline view mode. I set it to show only 'heading 1' level and selected the ones I wanted, not selecting the appendix or reference. Then I went to the home tab and sorted paragraph by ascending alphabetical order. I got some code I believe I can use to get it to run in VBA. However, it's not a complete fix as I don't want to select the last two with heading 1. It also works if I manually select the tables under each heading 1, but I can't set the spacing before and after. I'd like each heading and the tables under them to have a space or two between each for looks and editing purposes.
Also, if someone is going to give my question a negative rating, then please post a comment explaining. As far as I can tell from the faq about the forum and the other questions I've seen, it is a well posed question. A clear title, a good explanation of the problem, code examples, research. So if I am doing something wrong, please inform me, so that I can correct it.
first thanks for your bit about macro recorder and outline mode, I have been trying for long time to fill a list box with selection.text between two HeadingLevel(1) headings.
now to yours, sorry I can't think of way to do in word. BUT it would be real easy in Access. one table of categories like called tblCategories another for recipes tblRecipes. To make real easy, when the use autoID on ALL tables. But to avoid LOTS of headaches for tblRecipes rename its autoID to RecipesID same for other tables. in table of recipes you can use a memo field to hold large amount of data. the spot for text in Heading would be put in one field of the tblRecipes. once you have tables looking to have a field for each item you want to track. hit save, then use wizard to create a form based on table. repeat for all tables you want to have it real easy to put info into any table.
1.reportTOC based on query of Every Heading you want, can preview or print as want. reportByCategory and so on reports are sorted a to z unless you want to sort by Owner, then recipe all auto sorted a - z.
report wizard to get hard copy. if you want to sort real easy, built in. also if want to be able to pick all recipes for a holiday real easy, one table tblHolidays. one tblHolidayRecipes fields autoId (not used by you anywhere but needed), fldRecipesId (holds RecipesId) , fldHolidayId (holds HolidayId). the wizard will show how to get only what you want. in access 2013 you can include pix of food or.
when i select index 0 then all Previously selected item should be remove. Is this possible? i have multiple chosen drop down in same page...i have tried so many things but didn't get the proper solutions yet.
I am not sure what you mean. If it is multiple select, it means you can select "multiple" items, otherwise it's a normal select. Also see this and check out if it provides something helpful for you.
I have quite the request. A developer created our database that has multiple Layouts with a relationship tree that is very messy. Had another developer come in, take a look at it, he said that it would be too time consuming and painful to deconstruct our system, consider creating a script for now so that you can work around it until it can be fixed. Here's the dilemma: I've got information on one page that is supposed to reference information on a number of different pages utilizing tabs and portals. However, all the information is linked to a username. This username is not static/serialized or what have you. Therefore, if the issue is not caught right away a great deal of information can be linked to this person's 'page'. If the name is incorrect and someone tries to alter the username even slightly, it breaks that relationship and starts a new one. The information does not disappear, but it is basically sitting in limbo somewhere until you change the name back to the original. I've actually tried exporting the information, changing the information that doesn't match, i.e. changing a name from Jon.Smith to John.Smith, and then importing the information to a new 'page' for that person with unsuccessful results. Which brings me to my question, is a script going to be able to fix this problem? Likewise, are there any suggestions to how to create this script? I apologize, but I have very little experience with DataBase management at all, and am not sure why this project fell upon me. Any help would be GREATLY appreciated.
Well, as a general answer, just about anything that a user can do in FileMaker (and by user, I mean non-developer, so activities such as defining the database structure, writing scripts, etc., are excluded) can be scripted. So if you're able to "solve" the problem by resetting a field's value, for example, then, yes, a script can do that.
Regarding your specific trouble, a script probably doesn't need to export the records, but could reset the values for the field within FileMaker. This could be done either by looping through the records that need to be changed or by using the Replace Field Contents script step. So a script could do something like this:
Go to Layout[MyLayout] // Go to a layout that is attached to the table you need to search.
Perform Find[Restore] // Restore a find that will show the records you need to change.
Replace Field Contents[Table::Field; "New Value"]
Offering more advice than this would require actually seeing the database and understanding more about your specific needs.
wchsTech4, you are in luck because your problem is easy to fix. You don't even need a script.
BACK UP YOUR FILE(S) FIRST. Then:
1) Create two new fields:
id (person table)
Options for id: Auto-enter serial number
person_id (the table related to person)
2) Generate serial numbers for the new id field in the person table.
Navigate to the person layout.
'Records' > 'Show all records'
Click in the id field and select 'Records' > 'Replace field contents.'
Choose 'Replace with serial numbers' and accept the defaults. Be sure to check the box to update your next serial number.
3) Place the serial numbers you just generated in the related table.
Navigate to the related layout.
'Records' > 'Show all records'
Click in the person_id field and select 'Records' > 'Replace field contents.'
Choose 'Specify' next to 'Replace with calculated results.'
In the drop down on the top left, select the related person table.
Double click the id field (your calculation should be person::id, with person replaced with the name of your table).
Click 'OK' and then 'Replace.'
4) Change the relationship.
Select 'File' > 'Manage' > 'Database.'
Navigate to the relationship tab.
Change the relationship from being based on name to id.
5) Test everything. Should work.
There is a chance that your related records are being created in such a manner that you also need to modify a script, website, or something else not mentioned here to have your fix work going forward. That is important to investigate.