I am a new user to Kafka and have been trialling it for about 2-3 weeks now. I believe at the moment I have a good understand of how Kafka works for the most part, but after attempting to fit the API for my own Kafka consumer (this is obscure but I'm following the guidelines for the new KafkaConsumer that is supposed to be available for v 0.9, which is out on the 'trunk' repo atm) I've had latency issues consuming from a topic if I have multiple consumers with the same groupID.
In this setup, my console consistently logs issues regarding a 'rebalance triggering'. Do rebalances occur when I add new consumers to a consumer group and are they triggered in order to figure out which consumer instance in the same groupID will get which partitions or are rebalances used for something else entirely?
I also came across this passage from https://cwiki.apache.org/confluence/display/KAFKA/Kafka+0.9+Consumer+Rewrite+Design and I just can't seem to understand it, so if someone could help me make sense of it that would be much appreciated:
Rebalancing is the process where a group of consumer instances
(belonging to the same group) co-ordinate to own a mutually exclusive
set of partitions of topics that the group is subscribed to. At the
end of a successful rebalance operation for a consumer group, every
partition for all subscribed topics will be owned by a single consumer
instance within the group. The way rebalancing works is as follows.
Every broker is elected as the coordinator for a subset of the
consumer groups. The co-ordinator broker for a group is responsible
for orchestrating a rebalance operation on consumer group membership
changes or partition changes for the subscribed topics. It is also
responsible for communicating the resulting partition ownership
configuration to all consumers of the group undergoing a rebalance
operation.
When a new consumer joins a consumer group the set of consumers attempt to "rebalance" the load to assign partitions to each consumer. If the set of consumers changes while this assignment is taking place the rebalance will fail and retry. This setting controls the maximum number of attempts before giving up.
the command for this is: rebalance.max.retries and is set to 4 by default.
also, it might be happening if the following is true:
ZooKeeper session timeout. If the consumer fails to send a heartbeat to ZooKeeper for this period of time it is considered dead and a rebalance will occur.
Hope this helps!
Rebalance is the re-assignment of partition ownership among consumers within a given consumer group. Remember that every consumer in a consumer group is assigned one or more topic partitions exclusively.
A Rebalance happens when:
a consumer JOINS the group
a consumer SHUTS DOWN cleanly
a consumer is considered DEAD by the group coordinator. This may happen after a crash or when the consumer is busy with a long-running processing, which means that no heartbeats has been sent in the meanwhile by the consumer to the group coordinator within the configured session interval
new partitions are added
Being a group coordinator (one of the brokers in the cluster) and a group leader (the first consumer that joins a group) designated for a consumer group, Rebalance can be more or less described as follows:
the leader receives a list of all consumers in the group from the
group coordinator (this will include all consumers that sent a
heartbeat recently and which are therefore considered alive) and is
responsible for assigning a subset of partitions to each consumer.
After deciding on the partition assignment (Kafka has a couple built-in partition assignment policies), the group leader sends
the list of assignments to the group coordinator, which sends this
information to all the consumers.
This applies to Kafka 0.9, but I'm quite sure for newer versions is still valid.
Consumer rebalance decide which consumer is responsible for which subset of all available partitions for some topic(s).
For example, you might have a topic with 20 partitions and 10 consumers; at the end of a rebalance, you might expect each consumer to be reading from 2 partitions. If you shut down 10 of those consumers, you might expect each consumer to have 1 partition after a rebalance has completed. Consumer rebalance is a dynamic partition assignment that can handle automatically by Kafka.
A Group Coordinator is one of the brokers responsible to communicate with consumers to achieve rebalances between consumers.In earlier version Zookeeper stored metadata details but the latest version, it stores on brokers. The consumer coordinators receive heartbeat and polling from all consumers of the consumer groups so be aware of each consumer's heartbeat and manager their offset on partitions.
Group Leader:
One of a consumer Group work as group leader which is chosen by the Group coordinator and will responsible for making partition assignment decision on behalf of all consumers in a group.
Rebalance Scenario:
Consumer Group subscribes to any topics
A Consumer instance could not able to send a heartbeat with a session.heart.beat time interval.
Consumer long process exceeds the poll timeout
Consumer of Consumer group through exception
New partition added.
Scaling Up and Down consumer. Added new consumer or remove existing consumer manually for
Consumer Rebalance
Consumer rebalance initiated when consumer requests to join a group or leave a group. The Group Leader receives a list of all active consumers from the Group Coordinator. Group Leader decides partition(s) assigned to each consumer by using PartitionAssigner.
Once Group Leader finalize partition assignment it sends assignments list to Group Coordinator which send back this information to all consumer. Group only sends applicable partitions to their consumer not other consumer assigned partitions. Only the Group Leader aware of all consumers and their assigned partitions.
After the rebalance is complete, consumers start sending Heartbeat to the Group Coordinator that it's alive.
Consumers send an OffsetFetch request to the Group Coordinator to get the last committed offsets for their assigned partitions.
Consumers start consuming messaged for newly assigned partition.
State Management
While rebalancing, the Group coordinator set its state to Rebalance and wait for all consumers to re-join the group.
When the Group starts rebalancing, the group coordinator first switches its state to rebalance so that all interacting consumers are notified to rejoin the group.
Once rebalance completed Group coordinator create new generation ID and notified to all consumers and group proceed to sync stage where consumers send sync request and go to wait until group Leader finish generating new assign partition. Once consumers received a new assigned partition they moved to a stable stage.
Static Membership
This rebalancing is quite a heavy operation as it required to stop all consumers and wait to get the new assigned partition. On each rebalance always create new generation id means refresh everything. To solve this overhead Kafka 2.3+ introduced Static Membership to reduce unnecessary Rebalance. KIP-345
In Static Membership, the consumer state will persist and on Rebalance the same assignment will get apply. It uses a new group.instance.id to persist member identity. So even in the worst-case scenario member id get reshuffle to assign a new partition but still, the same consumer instance-id will get the same partition assignment
instanceId: A, memberId: 1, assignment: {0, 1, 2}
instanceId: B, memberId: 2, assignment: {3, 4, 5}
instanceId: C, memberId: 3, assignment: {6, 7, 8}
And after the restart:
instanceId: A, memberId: 4, assignment: {0, 1, 2}
instanceId: B, memberId: 2, assignment: {3, 4, 5}
instanceId: C, memberId: 3, assignment: {6, 7, 8}
Ref:
https://www.confluent.io/blog/kafka-rebalance-protocol-static-membership
https://cwiki.apache.org/confluence/display/KAFKA/KIP-345%3A+Introduce+static+membership+protocol+to+reduce+consumer+rebalances
Consumer Group, Consumer and Partition Rebalance
Kafka Consumer can consume/Subscribe to multiple topics and start receiving the messages. Kafka Consumer are typically part of consumer group. When multiple consumers are subscribed to a topic and belong to same consumer group, each consumer in the group will receive messages from a different subset of partitions in the topic.
So consumers in a consumer group share ownership of the partitions in the topics they subscribe to. When we add a new consumer to the group, it starts consuming messages from partitions previously consumed by another consumer. The same thing happen when a consumer shuts down or crashes; it leaves the group, and the partition it used to consume will be consumed by one of the remaining consumers. Reassignment of partitions to consumer also happen when the consumer group is consuming are modified like new partition are added.
"Moving partition ownership from one consumer to another is called rebalance" During a rebalance, consumers can not consumer messages so we can say that rebalance is a short window of unavailability to entire consumer group. It also leads to some other activity on consumer side like when partitions are moved from one consumer t another consumer , cosnumer lose its current state like if any data is cache then it need to refresh its cache , slowing down the overall application until consumer is setup its state again.
heartbeat.interval.ms
Consumer maintain membership in a consumer group and ownership of the partitions assigned to them is by sending heartbeats to Kafka broker designated as a group coordinator and it will be different for different consumer group. As long as consumer is sending heartbeat at a regular intervals then it is considered t be alive and continue processing messages from designated assigned partition Heartbeat are sent when consumer call the poll method ( to retrieve records from partition) and when it commit the records it has consumed.
If a consumer stop sending heartbeat for long time and its session will time out (controlled by session.timeout.ms) then group coordinator will consider it dead and as a result trigger a rebalance. If a consumer crashed and are not processing messages it will take group coordinator few seconds without heartbeat to decide it is dead and trigger rebalance. When closing a consumer cleanly , consumer will notify the group coordinator that it is leaving the group and coordinator will trigger the rebalance immediately , reducing the time of unavailability of messages.
Related
I have a consumer subscribed to a topic and it is polling 3 partitions. Because of my specific use case, this consumer invokes pause(TopicPartition) method, so all partitions are going to be set in paused. Anyway, it continues polling in order to send the heartbeat. Then, a second consumer joins the same group. Coordinator rebalances partitions. It is expected that the 3 partitions being balanced between both consumers, however all partitions (3) are revoked from the first consumer and they are assigned to the second one.
I could verify that in my first consumer at rebalance time (with all partitions in pause). The Coordinator invokes ConsumerRebalanceListener.onPartitionsRevoked but it never invokes ConsumerRebalanceListener.onPartitionsAssigned
Why Coordinator revoke all partitions from the first consumer? Is it related to paused partitions? Has anyone experienced the same behavior when rebalancing paused partitions?
Suppose:
Kakfa consumer reads a message M from its assigned partition P
It gets network-partitioned away from the broker
Kafka detects this and reassigns P to a consumer on another machine.
Network-partition is healed, and the first consumer tries to commit the offset for message M
Will there be any exception thrown in step 4? Is there a check which detects that the first consumer is no longer assigned partition P, and so shouldn't be committing offsets for it?
In this case, the first consumer can not commit off set anymore. It's assigned partition will be revoked and when it join consumer group again, a rebalancing process will be trigger. So the answer is yes.
https://cwiki.apache.org/confluence/display/KAFKA/A+Guide+To+The+Kafka+Protocol
The offsets for a given consumer group are maintained by a specific broker called the group coordinator. i.e., a consumer needs to issue its offset commit and fetch requests to this specific broker
Since one group coordinator is responsible and it know which consumers have partition assigned and which consumers have no longer the partition assigned
When they rejoin, they are treated in the same way as a brand new consumer joining the consumer group. They will get one or more partitions assigned by rebalancing (which may be totally different from the partitions they were reading from last time) and the consumer_offset topic will inform them where to start reading from.
I was running a test where kafka consumer was reading data from multiple partitions of a topic. While the process was running I added more partitions. It took around 5 minutes for consumer thread to read data from the new partition. I have found this configuration "topic.metadata.refresh.interval.ms", but this is for producer only. Is there a similar config for consumer too?
When we add more partitions to an existing topic then a rebalance process gets initiated.
Every consumer in a consumer group is assigned one or more topic partitions exclusively, and Rebalance is the re-assignment of partition ownership among consumers.
A Rebalance happens when:
consumer JOINS the group
consumer SHUTS DOWN cleanly
consumer is considered DEAD by the group coordinator. This may happen after a
crash or when the consumer is busy with long-running processing, which means
that no heartbeats have been sent in the meanwhile by the consumer to the
group coordinator within the configured session interval
new partitions are added
We need to provide two parameters to reduce the time to rebalance.
request.timeout.ms
max.poll.interval.ms
More detailed information is available at the following.
https://medium.com/streamthoughts/apache-kafka-rebalance-protocol-or-the-magic-behind-your-streams-applications-e94baf68e4f2
I changed "metadata.max.age.ms" parameter value to refresh matadata https://kafka.apache.org/documentation/#consumerconfigs_metadata.max.age.ms
I have a single Topic with 5 partitions.
I have 5 threads, each creating a Consumer
All consumer are with the same consumer group using group.id.
I also gave each consumer a different and unique client.id
I see that 2 consumers are reading the same message to process
Should kafka handle this?
How do I troubleshoot it?
Consumers within the same group should not receive the same messages. The partitions should be split across all consumers and at any time Kafka's consumer group logic ensures only 1 consumer is assigned to each partition.
The exception is if 1 consumer crashes before it's able to commit its offset. In that case, the new consumer that gets assigned the partition will re-consume from the last committed offset.
You can use the consumer group tool kafka-consumer-groups that comes with Kafka to check the partitions assigned to each consumer in your group.
I see references to Kafka Consumer Group Coordinators and Consumer Group Leaders...
What is the difference?
What is the benefit from separating group management into two different sets of responsibilities?
1. What is the difference?
The consumer group coordinator is one of the brokers while the group leader is one of the consumer in a consumer group.
The group coordinator is nothing but one of the brokers which receives heartbeats (or polling for messages) from all consumers of a consumer group. Every consumer group has a group coordinator. If a consumer stops sending heartbeats, the coordinator will trigger a rebalance.
2. What is the benefit from separating group management into two different sets of responsibilities?
Short answer
It gives you more flexible/extensible assignment policies without rebooting the broker.
Long answer
The key point of this separation is that group leader is responsible for computing the assignments for the whole group.
It means that this assignment strategy can be configured on a consumer (see partition.assignment.strategy consumer config parameter).
If a partitions assignment was handled by a consumer group coordinator, it would be impossible to configure a custom assignment strategy without rebooting the broker.
For more details see Kafka Client-side Assignment Proposal.
Quotes from documentation
From the "Kafka The Definitive Guide" [Narkhede, Shapira & Palino, 2017]:
When a consumer wants to join a consumer group, it sends a JoinGroup
request to the group coordinator. The first consumer to join the group
becomes the group leader. The leader receives a list of all
consumers in the group from the group coordinator (this will include
all consumers that sent a heartbeat recently and are therefore
considered alive) and it is responsible for assigning a subset of
partitions to each consumer. It uses an implementation of the
PartitionAssignor interface to decide which partitions should be
handled by which consumer.
[...] After deciding on the partition assignment, the consumer leader sends
the list of assignments to the GroupCoordinator which sends this
information to all the consumers. Each consumer only sees his own
assignment - the leader is the only client process that has the full
list of consumers in the group and their assignments. This process
repeats every time a rebalance happens.