Before two weeks I setup build by email and was every things work fine
but before two days I don't know why stop working
after check it's seem doesn't call
"Poll an email inbox Schedule" at all, in log it is always like this "Polling has not run yet."
Test Connection:
"Connected to mailbox.
Searching folder...
Found matching email(s) : 1.
Result: Success!"
I have test "Poll SCM" and "Build periodically" it are work fine .
Jenkins ver. 1.614
poll-mailbox-trigger ver. 0.16
in schedule : H/5 * * * *
After configuring the plugin details .Just enable the auto refresh option at the top . So its not required to restart the jenkins any time.
Related
Maven java Selenium Project. I have been building jobs successfully. But I cannot attach My report to send email to outlook.
enter image description here
I am able to add the report to the body of the email, which displays without any CSS. Please help.
enter image description here
In 'Editable Email Notification', ideally, you need to place the file to be attached in "workspace" of the job. & then use filename.extension in 'Attachments'.
https://i.stack.imgur.com/Bl79T.png
If you are using a slave/agent node to build a job, you will find the workspace in root directory of agent node. -> Root_directory/workplace/job_name.
or you may find your job's workspace in "build.xml" of your job.(jenkins/jobs/job_name/builds/build_no/build.xml)
I had faced similar issue with no attachments in automated mail :)
Solution - update the url as per the location where file is generated .
Example - I created a job named - "AutoRunJob" -> Workspace -> File ( generating html )
my path in the editable email notification - target/test-output/LoggerReport/dashboard.html
Note : In Case no emails are flowing check what triggers it is set to by clicking on advance settings inside editable email notification configurations .
We have a scheduled release in Octopus that deploys the last known good release to Prod back to Prod.
However this has started failing because the artifact has fallen out of our retention policy - this we can fix by altering the retention policy.
The real issue is that when it failed no notifications were sent to the team because artifact collection happens before even the first step.
I have tested this with a dummy release that just has a single basic step and then a Slack Notification step for when it fails. However, we never get to the first step - let alone the slack step.
How can i hook on to this failure so that we know about these issues in future.
You have to follow below steps to achieve the same
Step 1) Add Email Template step # First : to inform that Build is triggered
There is a setting in that called : Start Trigger set it to Run in parallel with the previous step so email will be triggered while your artifacts are downloading
Step 2) Add Email Template step # Last : to inform that build failed
Just change the setting Run Condition set it to : Failure: only run when a previous step failed
so when your deployment get fail, It will notify the same. You can add the cause of failure in email body using inbuilt variables also.
I created a project under actions console and made a test action package for smart home app. I want to try uploading the action package I have using gactions. However, every time I execute this command
./gactions --verbose update --action_package action.json --project my_project_id
the result is always like this:
Unable to update: Patch https://actions.googleapis.com/v2/agents/my_project_id?updateMask=agent.draftActionPackage.actions%2Cagent.draftActionPackage.conversations&validateOnly=false: Post https://accounts.google.com/o/oauth2/token: dial tcp 216.58.200.45:443: i/o timeout
I checked the verbose log and I noticed that it is reading some data from creds.data
Reading credentials from: creds.data
Then I noticed the contents in creds.data contains the access token and the expiry time. But the expiry time is july 18, which is a lot of days from now. I am not sure if this is the case that causes timeout error. And I also don't know how to update the creds.data to get a new access token.
Alright. I noticed that a part of this error is my net problem. But I was able to open yahoo and other sites, while the update just didn't work. But nevermind, I just switched to a different Wi-Fi.
Then I deleted the creds.data. And executed the update command again, this will come out.
Gactions needs access to your Google account. Please copy & paste the URL below into a web browser and follow the instructions there. Then copy and paste the authorization code from the browser back here.
Visit this URL:
https://accounts.google.com/o/oauth2/auth?access_type=offline&client_id=237807841406-o6vu1tjkq8oqjub8jilj6vuc396e2d0c.apps.googleusercontent.com&redirect_uri=urn%3Aietf%3Awg%3Aoauth%3A2.0%3Aoob&response_type=code&scope=https%3A%2F%2Fwww.googleapis.com%2Fauth%2Fassistant+https%3A%2F%2Fwww.googleapis.com%2Fauth%2Factions.builder&state=state
Enter authorization code:
Then I followed the instructions above, got the authorization code, copied and pasted it in the console, and everything works fine now.
I have the task to run a build task whenever the source code in github is updated. However I am very new with Jenkins and I have a hard time to accomplish this.
My understanding
github.com will send a POST message to a specific URL that I specify. As an example let's use:
http://mywebsite/src-updated
So the source code get's update, github sends the POST message to mywebsite/src-updated. Since HTTP runs on port 80, Apache receives this message.
____________LAN____________
| |
| .......... .......... |
| :JENKINS : :APACHE : | POST message to: ..............
| :Listen : :Listen :<--|<----http://mywebsite/src-updated--- : github.com :
| :on 8080 : :on 80 : | :............:
| :........: :........: |
|___________________________|
My frustration
Now what?
Jenkins sits there like a loser with no-one wanting to play with him. How will Mr. Jenkins get the message? Is there some module I have to install on Apache so that it notifies him? All this sounds very different from the sparse information I read so far so I feel that I am totally off track.
I also tried to use the Github plugin but I am totally lost on how it's supposed to work (terrible documentation if you're new to the whole thing).
Any help?
Please check this link on configuring Jenkins with Apache. Besides, i also found this note on the GitHub plugin page:
Jenkins inside a firewall:
In case your Jenkins run inside the firewall and not directly reachable from the internet, this plugin lets you specify an arbitrary endpoint URL as an override in the automatic mode. The plugin will assume that you've set up reverse proxy or some other means so that the POST from GitHub will be routed to the Jenkins.
As far as running builds is concerned whenever source code in GitHub is updated, it's very simple to configure in Jenkins. There is a polling option present in the job's/project's configuration page. Go to the configuration section of the job. Search for Build Triggers section. You will find a check-box named Poll SCM. Enabling this option tells Jenkins to initiate a build as soon as it finds a change in the repository (in this case, GitHub) you specified. You will have to specify some interval after which it will check GitHub for changes:
For example,
# every fifteen minutes (perhaps at :07, :22, :37, :52)
H/15 * * * *
For more options and details on the above, don't forget to look for the help section '?'
I use Jenkins extended email notification plugin to get an email after a build finishes...
and when i get the mail i see URL which gives the latest changes done to the build for ex:something like: <://abcd.l%20Automation%20-%20IE8%20Browser/changes>...
Instead of this i would like to see the URL in the mail which directly gives the build status
for ex: some thing like://abcd.l%20Automation%20-%20IE8%20Browser/buildnumber>...so that clicking on this URL should directly open the build status page....
is there any way we can configure with the jenkins ?
I have default content being set as below : $PROJECT_NAME - Build # $BUILD_NUMBER - $BUILD_STATUS:
Check console output at $BUILD_URL to view the results.
please let me know ...
musaffir
$BUILD_URL should work.
Please check "Advanced Settings" of "Editable Email Notification" plugin in your job. You might have overridden the default settings of "Failure" trigger