Related
I'm trying to set up a lustre client (docs) inside a docker container running on BlueData.
As per this post, I've modified the BlueData config on each worker and the controller node:
$ vi /opt/bluedata/common-install/bd_mgmt/releases/1/sys.config
I added the SYS_ADMIN capability:
{allowed_docker_caps, ["SETPCAP",
"SYS_ADMIN",
...
And rebooted the host.
Next, I provisioned a Centos 7.x cluster in BlueData:
CentOS 7.x with no pre-packaged apps or software
Image Version: 2.2
Distro ID: bluedata/centos7
Then I ssh'd into the Centos container:
$ ssh -o StrictHostKeyChecking=no -i /Users/me/.ssh/id_rsa centos#x.x.x.x
Inside the container, I install the lustre client:
sudo yum install \
kernel \
kernel-devel \
kernel-headers \
kernel-abi-whitelists \
kernel-tools \
kernel-tools-libs \
kernel-tools-libs-devel
cat >/tmp/lustre-repo.conf <<\__EOF
[lustre-server]
name=lustre-server
baseurl=https://downloads.whamcloud.com/public/lustre/latest-release/el7/server
gpgcheck=0
[lustre-client]
name=lustre-client
baseurl=https://downloads.whamcloud.com/public/lustre/latest-release/el7/client
gpgcheck=0
[e2fsprogs-wc]
name=e2fsprogs-wc
baseurl=https://downloads.whamcloud.com/public/e2fsprogs/latest/el7
gpgcheck=0
__EOF
sudo mv /tmp/lustre-repo.conf /etc/yum.repos.d/lustre.repo
sudo reboot
sudo yum install epel-release
sudo yum --nogpgcheck --enablerepo=lustre-client install lustre-client-dkms lustre-client
sudo reboot
However, I receive an error when I try to load the lustre module:
$ sudo modprobe -v lustre
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/kernel/crypto/crct10dif_generic.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/kernel/lib/crc-t10dif.ko.xz
modprobe: ERROR: could not insert 'lustre': Operation not permitted
I have checked the kernel version:
[bluedata#bluedata-2 ~]$ uname -a
Linux bluedata-2.bdlocal 3.10.0-957.21.3.el7.x86_64 #1 SMP Tue Jun 18 16:35:19 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
The lustre version I installed is 2.12:
kmod-lustre-client.x86_64 2.12.2-1.el7 #lustre-client
lustre-client.x86_64 2.12.2-1.el7 #lustre-client
Update 1
No errors are shown with dmesg:
[bluedata#bluedata-3 ~]$ dmesg -c
[bluedata#bluedata-3 ~]$ sudo modprobe -v lustre
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/kernel/crypto/crct10dif_generic.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/kernel/lib/crc-t10dif.ko.xz
modprobe: ERROR: could not insert 'lustre': Operation not permitted
[bluedata#bluedata-3 ~]$ dmesg
Update 2
$ sudo strace modprobe lustre
Outputs:
execve("/sbin/modprobe", ["modprobe", "lustre"], [/* 16 vars */]) = 0
brk(NULL) = 0x1648000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4458ff2000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=22387, ...}) = 0
mmap(NULL, 22387, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f4458fec000
close(3) = 0
open("/lib64/liblzma.so.5", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\2000\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=157424, ...}) = 0
mmap(NULL, 2249352, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f4458bac000
mprotect(0x7f4458bd1000, 2093056, PROT_NONE) = 0
mmap(0x7f4458dd0000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x24000) = 0x7f4458dd0000
close(3) = 0
open("/lib64/libz.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20!\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=90248, ...}) = 0
mmap(NULL, 2183272, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f4458996000
mprotect(0x7f44589ab000, 2093056, PROT_NONE) = 0
mmap(0x7f4458baa000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14000) = 0x7f4458baa000
close(3) = 0
open("/lib64/libgcc_s.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220*\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=88776, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4458feb000
mmap(NULL, 2184192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f4458780000
mprotect(0x7f4458795000, 2093056, PROT_NONE) = 0
mmap(0x7f4458994000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14000) = 0x7f4458994000
close(3) = 0
open("/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240%\2\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=2151672, ...}) = 0
mmap(NULL, 3981792, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f44583b3000
mprotect(0x7f4458575000, 2097152, PROT_NONE) = 0
mmap(0x7f4458775000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1c2000) = 0x7f4458775000
mmap(0x7f445877b000, 16864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f445877b000
close(3) = 0
open("/lib64/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260l\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=141968, ...}) = 0
mmap(NULL, 2208904, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f4458197000
mprotect(0x7f44581ae000, 2093056, PROT_NONE) = 0
mmap(0x7f44583ad000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7f44583ad000
mmap(0x7f44583af000, 13448, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f44583af000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4458fea000
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4458fe8000
arch_prctl(ARCH_SET_FS, 0x7f4458fe8740) = 0
mprotect(0x7f4458775000, 16384, PROT_READ) = 0
mprotect(0x7f44583ad000, 4096, PROT_READ) = 0
mprotect(0x7f4458994000, 4096, PROT_READ) = 0
mprotect(0x7f4458baa000, 4096, PROT_READ) = 0
mprotect(0x7f4458dd0000, 4096, PROT_READ) = 0
mprotect(0x621000, 4096, PROT_READ) = 0
mprotect(0x7f4458ff3000, 4096, PROT_READ) = 0
munmap(0x7f4458fec000, 22387) = 0
set_tid_address(0x7f4458fe8a10) = 1264
set_robust_list(0x7f4458fe8a20, 24) = 0
rt_sigaction(SIGRTMIN, {0x7f445819d790, [], SA_RESTORER|SA_SIGINFO, 0x7f44581a65d0}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0x7f445819d820, [], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x7f44581a65d0}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
brk(NULL) = 0x1648000
brk(0x1669000) = 0x1669000
brk(NULL) = 0x1669000
uname({sysname="Linux", nodename="bluedata-3.bdlocal", ...}) = 0
stat("/etc/modprobe.d", {st_mode=S_IFDIR|0755, st_size=54, ...}) = 0
openat(AT_FDCWD, "/etc/modprobe.d", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 3
getdents(3, /* 4 entries */, 32768) = 128
newfstatat(3, "dccp-blacklist.conf", {st_mode=S_IFREG|0644, st_size=215, ...}, 0) = 0
newfstatat(3, "ko2iblnd.conf", {st_mode=S_IFREG|0644, st_size=999, ...}, 0) = 0
getdents(3, /* 0 entries */, 32768) = 0
close(3) = 0
stat("/run/modprobe.d", 0x7ffcc1e0a640) = -1 ENOENT (No such file or directory)
stat("/lib/modprobe.d", {st_mode=S_IFDIR|0755, st_size=6, ...}) = 0
openat(AT_FDCWD, "/lib/modprobe.d", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 3
getdents(3, /* 2 entries */, 32768) = 48
getdents(3, /* 0 entries */, 32768) = 0
close(3) = 0
open("/etc/modprobe.d/dccp-blacklist.conf", O_RDONLY|O_CLOEXEC) = 3
fcntl(3, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
fstat(3, {st_mode=S_IFREG|0644, st_size=215, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4458ff1000
read(3, "# DCCP is considered a potential"..., 4096) = 215
read(3, "", 4096) = 0
close(3) = 0
munmap(0x7f4458ff1000, 4096) = 0
open("/etc/modprobe.d/ko2iblnd.conf", O_RDONLY|O_CLOEXEC) = 3
fcntl(3, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
fstat(3, {st_mode=S_IFREG|0644, st_size=999, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4458ff1000
read(3, "# Currently it isn't possible to"..., 4096) = 999
read(3, "", 4096) = 0
close(3) = 0
munmap(0x7f4458ff1000, 4096) = 0
open("/lib/modules/3.10.0-957.21.3.el7.x86_64/modules.softdep", O_RDONLY|O_CLOEXEC) = 3
fcntl(3, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
fstat(3, {st_mode=S_IFREG|0644, st_size=518, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4458ff1000
read(3, "# Soft dependencies extracted fr"..., 4096) = 518
read(3, "", 4096) = 0
close(3) = 0
munmap(0x7f4458ff1000, 4096) = 0
open("/proc/cmdline", O_RDONLY|O_CLOEXEC) = 3
read(3, "BOOT_IMAGE=/boot/vmlinuz-3.10.0-"..., 4095) = 193
read(3, "", 3902) = 0
close(3) = 0
open("/lib/modules/3.10.0-957.21.3.el7.x86_64/modules.dep.bin", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=382199, ...}) = 0
mmap(NULL, 382199, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f4458f8a000
close(3) = 0
open("/lib/modules/3.10.0-957.21.3.el7.x86_64/modules.alias.bin", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=802187, ...}) = 0
mmap(NULL, 802187, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f4458ec6000
close(3) = 0
open("/lib/modules/3.10.0-957.21.3.el7.x86_64/modules.symbols.bin", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=537967, ...}) = 0
mmap(NULL, 537967, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f4458e42000
close(3) = 0
open("/lib/modules/3.10.0-957.21.3.el7.x86_64/modules.builtin.bin", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=9332, ...}) = 0
mmap(NULL, 9332, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f4458fef000
close(3) = 0
stat("/lib/modules/3.10.0-957.21.3.el7.x86_64/extra/lmv.ko.xz", {st_mode=S_IFREG|0644, st_size=58688, ...}) = 0
stat("/lib/modules/3.10.0-957.21.3.el7.x86_64/extra/mdc.ko.xz", {st_mode=S_IFREG|0644, st_size=81772, ...}) = 0
stat("/lib/modules/3.10.0-957.21.3.el7.x86_64/extra/fid.ko.xz", {st_mode=S_IFREG|0644, st_size=11592, ...}) = 0
stat("/lib/modules/3.10.0-957.21.3.el7.x86_64/extra/osc.ko.xz", {st_mode=S_IFREG|0644, st_size=133688, ...}) = 0
stat("/lib/modules/3.10.0-957.21.3.el7.x86_64/extra/lov.ko.xz", {st_mode=S_IFREG|0644, st_size=101472, ...}) = 0
stat("/lib/modules/3.10.0-957.21.3.el7.x86_64/extra/fld.ko.xz", {st_mode=S_IFREG|0644, st_size=14600, ...}) = 0
stat("/lib/modules/3.10.0-957.21.3.el7.x86_64/extra/ptlrpc.ko.xz", {st_mode=S_IFREG|0644, st_size=369448, ...}) = 0
stat("/lib/modules/3.10.0-957.21.3.el7.x86_64/extra/obdclass.ko.xz", {st_mode=S_IFREG|0644, st_size=270652, ...}) = 0
stat("/lib/modules/3.10.0-957.21.3.el7.x86_64/extra/lnet.ko.xz", {st_mode=S_IFREG|0644, st_size=174800, ...}) = 0
stat("/lib/modules/3.10.0-957.21.3.el7.x86_64/extra/libcfs.ko.xz", {st_mode=S_IFREG|0644, st_size=88252, ...}) = 0
stat("/lib/modules/3.10.0-957.21.3.el7.x86_64/kernel/lib/crc-t10dif.ko.xz", {st_mode=S_IFREG|0644, st_size=2028, ...}) = 0
stat("/lib/modules/3.10.0-957.21.3.el7.x86_64/kernel/crypto/crct10dif_common.ko.xz", {st_mode=S_IFREG|0644, st_size=2004, ...}) = 0
open("/sys/module/lustre/initstate", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/sys/module/lustre", 0x7ffcc1e0a5c0) = -1 ENOENT (No such file or directory)
stat("/lib/modules/3.10.0-957.21.3.el7.x86_64/kernel/crypto/crct10dif_common.ko.xz", {st_mode=S_IFREG|0644, st_size=2004, ...}) = 0
stat("/lib/modules/3.10.0-957.21.3.el7.x86_64/kernel/crypto/crct10dif_common.ko.xz", {st_mode=S_IFREG|0644, st_size=2004, ...}) = 0
open("/sys/module/crct10dif_common/initstate", O_RDONLY|O_CLOEXEC) = 3
read(3, "live\n", 31) = 5
read(3, "", 26) = 0
close(3) = 0
open("/sys/module/crct10dif_common/initstate", O_RDONLY|O_CLOEXEC) = 3
read(3, "live\n", 31) = 5
read(3, "", 26) = 0
close(3) = 0
open("/sys/module/crct10dif_pclmul/initstate", O_RDONLY|O_CLOEXEC) = 3
read(3, "live\n", 31) = 5
read(3, "", 26) = 0
close(3) = 0
open("/sys/module/crct10dif_common/initstate", O_RDONLY|O_CLOEXEC) = 3
read(3, "live\n", 31) = 5
read(3, "", 26) = 0
close(3) = 0
open("/sys/module/crct10dif_generic/initstate", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/sys/module/crct10dif_generic", 0x7ffcc1e0a5c0) = -1 ENOENT (No such file or directory)
open("/lib/modules/3.10.0-957.21.3.el7.x86_64/kernel/crypto/crct10dif_generic.ko.xz", O_RDONLY|O_CLOEXEC) = 3
read(3, "\3757zXZ\0", 6) = 6
lseek(3, 0, SEEK_SET) = 0
read(3, "\3757zXZ\0\0\4\346\326\264F\2\0!\1\26\0\0\0t/\345\243\340\30l\6\267]\0?"..., 8192) = 1784
mmap(NULL, 8392704, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4457996000
read(3, "", 8192) = 0
munmap(0x7f4457996000, 8392704) = 0
init_module(0x1653f40, 6253, "") = -1 ENOSYS (Function not implemented)
open("/sys/module/crc_t10dif/initstate", O_RDONLY|O_CLOEXEC) = -1 ENOSYS (Function not implemented)
stat("/sys/module/crc_t10dif", 0x7ffcc1e0a5c0) = -1 ENOSYS (Function not implemented)
open("/lib/modules/3.10.0-957.21.3.el7.x86_64/kernel/lib/crc-t10dif.ko.xz", O_RDONLY|O_CLOEXEC) = -1 ENOSYS (Function not implemented)
read(4, 0x7ffcc1e0b5f0, 6) = -1 ENOSYS (Function not implemented)
lseek(4, 0, SEEK_SET) = -1 ENOSYS (Function not implemented)
read(4, 0x7ffcc1e074e0, 8192) = -1 ENOSYS (Function not implemented)
brk(NULL) = -1 ENOSYS (Function not implemented)
brk(0x1e7d000) = -1 ENOSYS (Function not implemented)
read(4, 0x7ffcc1e074e0, 8192) = -1 EPERM (Operation not permitted)
close(3) = 0
write(2, "modprobe: ERROR: could not inser"..., 68modprobe: ERROR: could not insert 'lustre': Operation not permitted
) = 68
close(4) = 0
munmap(0x7f4458f8a000, 382199) = 0
munmap(0x7f4458ec6000, 802187) = 0
munmap(0x7f4458e42000, 537967) = 0
munmap(0x7f4458fef000, 9332) = 0
exit_group(1) = ?
+++ exited with 1 +++
Update 3
I tried installing the kmod package instead of dkms:
Running transaction
Installing : kmod-lustre-client-2.12.2-1.el7.x86_64 1/1
mknod: '/var/tmp/dracut.cG1SKj/initramfs/dev/null': Operation not permitted
mknod: '/var/tmp/dracut.cG1SKj/initramfs/dev/kmsg': Operation not permitted
mknod: '/var/tmp/dracut.cG1SKj/initramfs/dev/console': Operation not permitted
Verifying : kmod-lustre-client-2.12.2-1.el7.x86_64 1/1
Installed:
kmod-lustre-client.x86_64 0:2.12.2-1.el7
Complete!
I then tried again sudo strace modprobe lustre:
...
open("/lib/modules/3.10.0-957.21.3.el7.x86_64/kernel/lib/crc-t10dif.ko.xz", O_RDONLY|O_CLOEXEC) = -1 ENOSYS (Function not implemented)
read(4, 0x7fff450be5f0, 6) = -1 ENOSYS (Function not implemented)
lseek(4, 0, SEEK_SET) = -1 ENOSYS (Function not implemented)
read(4, 0x7fff450ba4e0, 8192) = -1 ENOSYS (Function not implemented)
brk(NULL) = -1 ENOSYS (Function not implemented)
brk(0x1410000) = -1 ENOSYS (Function not implemented)
read(4, 0x7fff450ba4e0, 8192) = -1 EPERM (Operation not permitted)
close(3) = 0
write(2, "modprobe: ERROR: could not inser"..., 68modprobe: ERROR: could not insert 'lustre': Operation not permitted
) = 68
close(4) = 0
munmap(0x7f04da388000, 383873) = 0
munmap(0x7f04da2c4000, 802187) = 0
munmap(0x7f04da240000, 537967) = 0
munmap(0x7f04da3ed000, 9332) = 0
exit_group(1) = ?
+++ exited with 1 +++
Update 4
Running the container as --privileged has resolved the original error, but I now hit a new error:
[bluedata#bluedata-5 ~]$ sudo dmesg -c
[bluedata#bluedata-5 ~]$ sudo modprobe -v lustre
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/ptlrpc.ko.xz
modprobe: ERROR: could not insert 'lustre': Invalid argument
[bluedata#bluedata-5 ~]$ dmesg
[ 2072.258326] LNetError: 56638:0:(api-ni.c:2233:lnet_startup_lndnet()) Can't load LND tcp, module ksocklnd, rc=256
[ 2072.264113] LustreError: 56638:0:(events.c:625:ptlrpc_init_portals()) network initialisation failed
Update 5
The error message suggested I needed to configure the network, so I tried:
[bluedata#bluedata-5 ~]$ sudo modprobe lnet
[bluedata#bluedata-5 ~]$ sudo lnetctl lnet configure
lustre now loads without error:
[bluedata#bluedata-5 ~]$ sudo modprobe -v lustre
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/ptlrpc.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/fld.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/lov.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/osc.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/fid.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/mdc.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/lmv.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/lustre.ko.xz
I followed the original steps in the question and run the container as --privileged. Then loading and configuring lnet allowed loading the lustre module without error:
[bluedata#bluedata-5 ~]$ sudo modprobe lnet
[bluedata#bluedata-5 ~]$ sudo lnetctl lnet configure
[bluedata#bluedata-5 ~]$ sudo modprobe -v lustre
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/ptlrpc.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/fld.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/lov.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/osc.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/fid.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/mdc.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/lmv.ko.xz
insmod /lib/modules/3.10.0-957.21.3.el7.x86_64/extra/lustre.ko.xz
[bluedata#bluedata-5 ~]$
IMPORTANT NOTE: Running with the privileged flag is not recommended. There are other options - reach out to your local BlueData team to learn more.
I have a Postgresql Server with many databases, one of the database got a stucked INSERT INTO and it hangs all the Database. After rebooting the server activates it´s recovery mode, i did a strace and got the following:
openat(AT_FDCWD, "base/14096409", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 755
getdents(755, /* 1024 entries */, 32768) = 32760
getdents(755, /* 1024 entries */, 32768) = 32768
getdents(755, /* 801 entries */, 32768) = 25632
getdents(755, /* 0 entries */, 32768) = 0
close(755) = 0
openat(AT_FDCWD, "base/14096409", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 755
getdents(755, /* 1024 entries */, 32768) = 32760
getdents(755, /* 1024 entries */, 32768) = 32768
getdents(755, /* 801 entries */, 32768) = 25632
getdents(755, /* 0 entries */, 32768) = 0
close(755) = 0
open("base/14096409", O_RDONLY) = 755
fsync(755) = 0
close(755) = 0
getdents(5, /* 0 entries */, 32768) = 0
close(5) = 0
openat(AT_FDCWD, "pg_tblspc", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 5
getdents(5, /* 2 entries */, 32768) = 48
getdents(5, /* 0 entries */, 32768) = 0
close(5) = 0
open("pg_xlog/000000010000004E0000008B", O_RDWR) = 5
openat(AT_FDCWD, "pg_twophase", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 755
getdents(755, /* 2 entries */, 32768) = 48
getdents(755, /* 0 entries */, 32768) = 0
close(755) = 0
open("base/13702059/13709821", O_RDWR) = 755
lseek(755, 16384, SEEK_SET) = 16384
lseek(755, 0, SEEK_END) = 32768
write(328, "M\0\0\0\270\372\206w\1\0\4\0008\0\360\1\0 \4 \0\0\0\0 \235\300\5\30\232\n\6"..., 8192) = 8192
lseek(755, 8192, SEEK_SET) = 8192
read(755, "N\0\0\0\20\31\224f\1\0\0\0\374\1\310\22\360\37\4 \0\0\0\0\310\2220\0\330\2370\0"..., 8192) = 8192
lseek(755, 0, SEEK_END) = 32768
write(328, "M\0\0\0\340\rQx\1\0\4\0008\0P\1\0 \4 \0\0\0\0(\235\256\5H\232\300\5"..., 8192) = 8192
lseek(755, 24576, SEEK_SET) = 24576
read(755, "N\0\0\0\20\31\224f\1\0\0\0X\0028\21\360\37\4 \0\0\0\0008\221#\0X\2210\0"..., 8192) = 8192
write(328, "M\0\0\0 [$y\1\0\4\0008\0X\1\0 \4 \0\0\0\0(\235\254\5H\232\274\5"..., 8192) = 8192
lseek(755, 0, SEEK_SET) = 0
read(755, "I\0\0\0\310\307\10\t\1\0\0\0000\0\360\37\360\37\4 \0\0\0\0b1\5\0\2\0\0\0"..., 8192) = 8192
semop(3637260, [{12, -1, 0}], 1
Any advice what can i do ? Thanks so much !
I try to run this example, which uses ANN Toolbox for Scilab
https://burubaxair.wordpress.com/2014/03/12/artificial-neural-networks-in-scilab/
This is code:
T = [
1 1 1 1 1
0 0 1 0 0
0 0 1 0 0
0 0 1 0 0
0 0 1 0 0
0 0 1 0 0
0 0 1 0 0
]';
U = [
1 0 0 0 1
1 0 0 0 1
1 0 0 0 1
1 0 0 0 1
1 0 0 0 1
1 0 0 0 1
0 1 1 1 0
]';
N = [35 10 2];
W = ann_FF_init(N);
x = [1, 0, 0, 0, 1;
1, 0, 0, 0, 1;
1, 0, 0, 0, 1;
1, 0, 0, 0, 1;
1, 0, 0, 0, 1;
1, 0, 0, 0, 1;
0, 1, 1, 1, 0]';
t_t = [1 0]';
t_u = [0 1]';
t = [t_t, t_u];
lp = [0.01, 1e-4];
epochs = 3000;
W = ann_FF_Std_batch(x,t,N,W,lp,epochs);
y = ann_FF_run(x,N,W)
disp(y)
But i receive an error:
-->exec('D:\Учёба\Задачи\Recognition.sce', -1)
!--error 15
Подматрица задана некорректно (Submatrix is incorrect).
at line 37 of function ann_FF_grad_BP called by :
at line 25 of function ann_FF_Std_batch called by :
W = ann_FF_Std_batch(x,t,N,W,lp,epochs);
at line 33 of exec file called by :
exec('D:\Учёба\Задачи\Recognition.sce', -1)
An error may be in T and U matrix, but i don't understand why. Could you tell be what i do wrong? Thank you!
You've made 2 errors in your code:
You should not mix testing and training sets.
Testing input must be a single column.
Your first error was x = [ 1.... ] because it contained a single image, whereas you specified in N that you had two output neurons.
As stated in the example, you should have x = [T,U];
Your second error was to give x as a test to ann_FF_run. This function takes test input as a single column. But since you trained your NN with x just before it was a 5x7 matrix. Just change it to a column vector.
Here a corrected and commented code :
T = [...
1 1 1 1 1 ...
0 0 1 0 0 ...
0 0 1 0 0 ...
0 0 1 0 0 ...
0 0 1 0 0 ...
0 0 1 0 0 ...
0 0 1 0 0 ...
]';
U = [...
1 0 0 0 1 ...
1 0 0 0 1 ...
1 0 0 0 1 ...
1 0 0 0 1 ...
1 0 0 0 1 ...
1 0 0 0 1 ...
0 1 1 1 0 ...
]';
// setting the traing set of two image
xtrain = [T,U];
// so each image as 35 pixels so N(1) is 35
// and we have two images so N($) is 2
N = [35 10 2];
// training the NN
W = ann_FF_init(N);
// The expected response for T : 1 for T, 0 for U
t_t = [1 0]';
// The expected response for T : 1 for T, 0 for U
t_u = [0 1]';
// the overall response
t = [t_t, t_u];
// some parameters
lp = [0.01, 1e-4];
epochs = 3000;
// getting the weight of the trained NN
W = ann_FF_Std_batch(xtrain,t,N,W,lp,epochs);
// testing the traing set.
y = ann_FF_run(xtrain,N,W)
disp('Testing the traing set')
disp(y) //should get something close to t ~ [1 0 ; 0 1]
// testing a distord U
xtest1 = matrix([1, 0, 0, 0, 1;
1, 1, 0, 0, 1;
1, 0, 0, 0, 1;
1, 0, 0, 0, 1;
1, 0, 0, 0, 1;
1, 0, 0, 0, 1;
0, 1, 1, 1, 1]',-1,1);
y = ann_FF_run(xtest1,N,W)
disp('Testing a distored U')
disp(y) //should get something close to t_u ~ [0 1]
//testing something different from T and U. should get nothing
xtest2 = matrix([1, 0, 0, 0, 1;
1, 1, 0, 0, 1;
1, 0, 1, 0, 1;
1, 0, 1, 0, 1;
0, 0, 1, 1, 1;
0, 0, 1, 0, 1;
0, 1, 1, 1, 1]',-1,1);
y = ann_FF_run(xtest2,N,W)
disp('Testing something neither T nor U')
disp(y)
and the output from scilab's console
Testing the traing set
0.8538757 0.1075397
0.1393287 0.8957439
Testing a distored U
0.1078667
0.9007755
Testing something neither T nor U
0.3433933
0.6306797
I'm not very knowledgeable in named and bind, but after setting up my domain and playing with named (trying to set up my private email server) I ended up probably messing up something. Taceroute does not work anymore, I get a bind error (ping works). Relevant part of "strare traceroute xxx.xxx.xxx.xxx" is below. Can anybody please guide me to a solution - thx jankom
socket(PF_INET, SOCK_RAW, IPPROTO_ICMP) = 10
socket(PF_INET, SOCK_RAW, IPPROTO_RAW) = 11
getuid32() = 0
setuid32(0) = 0
getpid() = 3212
socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 12
bind(12, {sa_family=AF_UNSPEC, sa_data="\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16) = -1 EINVAL (Invalid argument)
dup(2) = 13
fcntl64(13, F_GETFL) = 0x2 (flags O_RDWR)
fstat64(13, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 4), ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb77c3000
_llseek(13, 0, 0xbfc4ebc0, SEEK_CUR) = -1 ESPIPE (Illegal seek)
write(13, "bind: Invalid argument\n", 23bind: Invalid argument) = 23
) 23
close(13) = 0
munmap(0xb77c3000, 4096) = 0
exit_group(1) = ?
I occasionally have Apache processes that go to 100% of CPU usage and never quit. When this happens 8 times (8 CPUs), the server becomes unusable. According to server-status, the "hung" process is a fairly complex custom Perl program, but when I print out warnings to the error log within the Perl, it shows that the process always goes to completion and returns, but apparently after returning, it goes into a loop or something. When I run strace on the process, it just shows tons of mmap2/munmap lines, e.g.:
mmap2(NULL, 4329472, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d7000
munmap(0xb42d7000, 4329472) = 0
mmap2(NULL, 4329472, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d7000
munmap(0xb42d7000, 4329472) = 0
mmap2(NULL, 4329472, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d7000
munmap(0xb42d7000, 4329472) = 0
mmap2(NULL, 4329472, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d7000
munmap(0xb42d7000, 4329472) = 0
mmap2(NULL, 4329472, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d7000
munmap(0xb42d7000, 4329472) = 0
mmap2(NULL, 4329472, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d7000
munmap(0xb42d7000, 4329472) = 0
mmap2(NULL, 4329472, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d7000
munmap(0xb42d7000, 4329472) = 0
mmap2(NULL, 4329472, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d7000
munmap(0xb42d7000, 4329472) = 0
mmap2(NULL, 4329472, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d7000
munmap(0xb42d7000, 4329472) = 0
mmap2(NULL, 4329472, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d7000
munmap(0xb42d7000, 4329472) = 0
mmap2(NULL, 4329472, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d7000
munmap(0xb42d7000, 4329472) = 0
mmap2(NULL, 4329472, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d7000
munmap(0xb42d7000, 4329472) = 0
mmap2(NULL, 4329472, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d7000
munmap(0xb42d7000, 4329472) = 0
mmap2(NULL, 4329472, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d7000
mremap(0xb3d7c000, 4329472, 4333568, MREMAP_MAYMOVE) = 0xb3d7c000
munmap(0xb42d7000, 4329472) = 0
mmap2(NULL, 4333568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d6000
munmap(0xb42d6000, 4333568) = 0
mmap2(NULL, 4333568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d6000
munmap(0xb42d6000, 4333568) = 0
mmap2(NULL, 4333568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d6000
munmap(0xb42d6000, 4333568) = 0
mmap2(NULL, 4333568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d6000
munmap(0xb42d6000, 4333568) = 0
mmap2(NULL, 4333568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d6000
munmap(0xb42d6000, 4333568) = 0
mmap2(NULL, 4333568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d6000
munmap(0xb42d6000, 4333568) = 0
mmap2(NULL, 4333568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d6000
munmap(0xb42d6000, 4333568) = 0
mmap2(NULL, 4333568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d6000
munmap(0xb42d6000, 4333568) = 0
mmap2(NULL, 4333568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d6000
munmap(0xb42d6000, 4333568) = 0
mmap2(NULL, 4333568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d6000
munmap(0xb42d6000, 4333568) = 0
mmap2(NULL, 4333568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d6000
munmap(0xb42d6000, 4333568) = 0
mmap2(NULL, 4333568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d6000
munmap(0xb42d6000, 4333568) = 0
mmap2(NULL, 4333568, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb42d6000
I have no idea what that means. It does this indefinitely. Is there any way to get a higher-level view of what it's doing? Has anyone seen anything similar to this?
Also, while it is usually a fairly random happenstance, if I issue an rflush() before exiting the Perl program, this almost always happens.
I'm using mod_perl/2.0.7, perl/5.12.4, apache/2.2.24. This was happening in a few minor versions down as well; I upgraded and it didn't improve anything. I'm also using DBI, DBD:ODBC.
My best guess is some kind of contention/race condition, but tracing the code with "warn" output indicates no such problem within the Perl itself. The Perl code also uses evals with timeout alarm signals that never get tripped, so it doesn't seem possible to be an issue with the Perl code.
Any ideas would be much appreciated.
I think I've solved it. Still don’t know why rflush() would have made it worse, nor did I find any higher level view of the strace results, but this is why it was doing it:
At some point, I added the following piece of code to the “error” subroutine, which is called any time the program detects an error internal to itself:
my $caller = "";
my $x = 1;
while (caller($x) && $x < 10)
{
my $subroutine = (caller($x))[3];
$subroutine =~ s/^.*::([^:]+?)$/$1/gis;
my $line = (caller($x))[2];
$caller = qq~->$subroutine(line $line)~.$caller if $subroutine;
}
$caller = "main".$caller;
All this does is print out which subroutine the error occurred in. So, for instance if in the main body of the program, the subroutine “sub1” is called from line 1234, and from there “sub2” is called from line 2345, and an error occurs in “sub2” on line 3456, then the “error” subroutine will note that the error occurred in “main(line 1234)->sub1(line 2345)->sub2(line 3456)”. This is important for debugging, obviously. Unfortunately, it doesn’t help debugging the “error” subroutine itself!
In the “while” loop, it checks to make sure that $x < 10 (there shouldn’t be 10 levels of subroutine calls). This is meant to prevent run-away iteration. Unfortunately, the line to actually increment the variable $x is missing. What this means is that it’s going to keep checking for $x < 10 indefinitely because $x always = 1. The tricky part about this is that the “error” subroutine is called from a signal trap handler, which apparently forks from the main program itself, so the “error” subroutine can run in this infinite loop while the body of the program appears to finish. That made it impossible to “print” or “warn” a linear view of what was happening, leading to great confusion. That also made it so that this infinite loop ran outside of my main “eval” which has a timeout on it, so the timeout never stopped the loop like it was expected to. The program completed to the very last line and output, but the process which was serving it just kept going, eating up 100% of the CPU due to this infinite loop in the signal handler.
The solution is just four characters: “$x++”. Adding that inside the while loop prevents the infinite iteration and actually allows the debugging info from the signal handler to print out.