I have deployed some proxy services in WSO2 ESB because I have to ask the endpoint for several responses (dataset), according to different soap action. Every response must be set in a file, so I set an appropriate sequence in the outSequence of the proxy service, and this sequence writes the soap answer into a file.
In this way i have to deploy a proxy service and a sequence for EVERY soapAction, so i ask: is there a way for deploying a single proxy service for a given web service and using it with several sequences according to the soapaction to perform?
My question was born by the need to implement several scheduled tasks that take a dataset from an endpoint (webService) and write it into a file, but i don't want to deploy so much proxy service for every kind of dataset I have to request to the web service!
I hope my question is clear.
You do not necessarily create a diffrent proxies for each and every soapAction. You can utilize the filter mediator in the OutSequence of single proxy and do the header base routing to relevant VFS endpoint.
Related
So i'm working with talend esb 8 , in it i'm creating some rest end point .These endpoints will be used in an other software that needs these endpoint to be public (public ip) . So i find a solution to create a public ip fro my computer . the problem this solution gives me a single port but as you know each endpoint need a diffrent port.
Can you please suggest me a solution that will make the port of the end point variables so that it will change while the job running.
I contacted Talend Support about a similar problem ( you can't put a context variable as a REST endpoint neither). Talend did not give me any solution regarding this kind of issue. For our purpose we had to duplicate flows and deployed it 2 times with 2 different endpoints.
Other solution would be to have an API Manager acting as a proxy to redirect incoming requests to your service ?
I got a webservice endpoint and I stumple upon how to correctly implement it.
It seems to be an parameterized exe-file which returns an XML Reply.
There is no documentation.
I am used to soap, wcf and rest but this is completely unknown to me, has anyone a guide or a best case how to implement such a service?
I can consume it with a HTTP GET but there are some questions left to me:
I know the questions are quite broad... But I could not find anything about it in the interwebz.
Is there a secure way to publish exe files as webservice?
Are there any critical downsides implementing such an interface?
Make I myself a fool and this is just an alias?
Example Url:
http://very.exhausting.company/Version/SuperStrange.exe?parameter=String
Web servers
What you call a webservice endpoint is nothing else than a web server listening on some host (normally 0.0.0.0) and some port on a physical or virtual machine and responding with some HTTP response to HTTP requests sent to that host, port and URIs that the web server cares to process.
Any web server is itself an application or a static or dynamic component of an application as the following examples illustrate:
JBoss, Glassfish, Tomcat etc. are applications, known as application servers, into which containers/servlets/plugins implementing web servers and corresponding endpoints are deployed. These listen on some port exposing generic web servers routing requests to those containers and their servlets;
a fat jar started with java -jar on a JVM which deploys a vert.x verticle featuring a vert.x HttpServer listening on some port is nothing else than a web server;
an interpreter such as node.js parsing and executing JavaScript code based on the express module will most likely deploy a web server on some port;
finally, a statically or dynamically linked application written in languages such as C++ or Go can expose a web server listing on some port.
All of the above cases feature different deployment mechanisms, but what they deploy is essentially the same: a piece of software that listens for HTTP requests on some port, executes some logic based on request and returns HTTP responses to the caller.
Your windows exe file is most likely a statically linked application that provides a web server.
Protocols
So we know you have a web server as it reacts to an HTTP GET. How does it relate to REST, SOAP etc? Effectively, REST, SOAP etc are higher level protocols. TCP is the low level, HTTP is based on top of that and your server supports that. REST, SOAP and everything else that you mention are higher level protocols that are based, among others, on HTTP. So all you know is that your application (web server) supports HTTP, but you do not know which higher level data exchange protocol it implements. It definitely implements some, at least a custom one that its author came up with to exchange data between a client and this application.
You can try to reverse engineer it, but it is not clear how would you find out about all possible endpoints, arguments, payload structures, accepted headers etc. Essentially, you have a web server publishing some sort of an API, but there is no generic way of telling what that API is.
Security
The world around you does not have to know how the API is published. You can put any of the above 4 web server implementations behind exactly the same firewall or a reverse proxy with SSL termination exposing just one host and port over SSL. So there is no difference in security, with respect to the world, whether you deploy it as exe or as a war into JBoss. This is not to say, that your exe file is secure: depending on how it is implemented it may allow all sorts of attacks, but again, this is equally true for any mechanism.
There is an external web-service (REST based) which provides logistics service. In order to consume it from our application (which is java stack), I created a client library (using jersey and jackson, which is a self-contained jar file, and gives simple getters and setters to work with). All that is needed to consume this REST service is this jar file (which is being used as re-usable asset).
However, one of our clients asked, "since we already have ESB (a middleware from IBM) for our existing integrations, why can we not have this integration also through ESB ?"
Is it possible to consume the REST based service using a middleware such as ESB(or MQ) ? If so, how ?
Will it be wise to do it ?
What arguments can I posit to my client to tell them this may not work ?
Thanks.
Is it possible to consume the REST based service using a middleware such as ESB(or MQ) ? If so, how ? -
Yes. Every ESB has its syntax/APIs. Should not be difficult to understand if you are already working with REST/http requests. Note, MQ is a message broker that will allow asynchronous communication. For example, the application that wants to consume the REST service can send a message to the broker and not wait for a response from the external service. The message broker in turn can talk REST to the external service. The message broker might expose a REST interface to consume messages. But it all depends on the use case. You may want to call REST service synchronously.
Most ESBs support calling external web services REST/SOAP. So an ESB does not necessarily mean MQ.
Will it be wise to do it ?
It depends. Many organizations set up ESB/Gateway as a policy and to route/filter/govern all external routings. Also to manage load, HA etc.
What arguments can I posit to my client to tell them this may not work ?
It will most certainly work. You should assess if using an ESB is an overhead based on your requirements.
After watching the BUILD conference videos for Azure Service Fabric, I'm left imagining how this might be a good fit for our current microservice-based architecture. There is one thing I'm not entirely sure how I would go about solving, however - the API gateway/proxy.
Consider a less-than-trivial microservice architecture where you have N number of services running within the Azure Service Fabric exposing REST endpoints. In many situations, you want to package these fragmented API endpoints up into a single-entry API for consumers to use, to avoid having them connecting to the service fabric-instances directly. The Azure Service Fabric solution seems so complete in every way that I'm sort of wondering if I missed something obvious when I don't see a way to trivially solve this within the capabilities mentioned during the BUILD talks.
Services like Vulcan aim to solve this problem by having the services register the paths they want routed to them in etcd. I'm guessing one way of solving this may be to create a separate stateful web service that other services can register themselves with, providing service name and the paths they need routed to them. The stateful web service can then route traffic to the correct instance based on its state. This doesn't seem entirely ideal, though, with stuff like removing routes when applications are removed and generally keeping the state in sync with the services deployed within the cluster. Has anybody given this any thought, or have any ideas how one might go about solving this within Azure Service Fabric?
The service registration/discoverability you need to do this is actually already there. There's a stateful system service called the Naming Service, which is basically a registrar of service instances and the endpoints they're listening on. So when you start up a service - either stateless or stateful - and open some listener on it, the address gets registered with the Naming Service.
Now the part you'd need to fill in is the "gateway" that users interact with. This doesn't have to be stateful because the Naming Service manages the stateful part. But you'd have to come up with an addressing scheme that works for you, and then it would just forward requests along to the right place. Basically something like this:
Receive request.
Use NS to find the service that can take the request.
Forward the request to it and the response back to the user.
If the service doesn't exist anymore, 404.
In general we don't like to dictate anything about how your services talk to each other, but we are thinking of ways to solve this problem for HTTP as a complete built-in solution.
We implemented a HTTP gateway service for this purpose as well. To make sure we can have one HTTP gateway for any internal protocol, we implemented the gateway for HTTP based internal services (like ASP.NET WebAPIs) using an ASP.NET 5 middleware. It routes requests from e.g /service to an internal Service Fabric address like fabric:/myapp/myservice by using the ServicePartitionClient and some retry logic from CommunicationClientFactoryBase.
We open-sourced this middleware and you can find it here:
https://github.com/c3-ls/ServiceFabric-HttpServiceGateway
There's also some more documentation in the wiki of the project.
This feature is build in for http endpoints, starting with release 5.0 of service fabric. The documentation is available at https://azure.microsoft.com/en-us/documentation/articles/service-fabric-reverseproxy/
We have used an open source project called Traefik with amazing success. There is an Azure Service Fabric wrapper around it - it's essentially a GoLang exe that is deployed onto the cluster as Managed Executable.
It supports circuit breakers, weighted round robin LB, path & header version routing (this is awesome for hosting multiple API versions), the list goes on. And its got a handy portal to view the config and health stats.
The real power in it lies in how you configure it. It's done via the service itself in the ServiceManifest.xml. This allows you to deploy new services and have them immediately able to be routed to - no need to update a routing table etc.
Example
<StatelessServiceType ServiceTypeName="WebServiceType">
<Extensions>
<Extension Name="Traefik">
<Labels xmlns="http://schemas.microsoft.com/2015/03/fabact-no-schema">
<Label Key="traefik.frontend.rule.example">PathPrefixStrip: /a/path/to/service</Label>
<Label Key="traefik.enable">true</Label>
<Label Key="traefik.frontend.passHostHeader">true</Label>
</Labels>
</Extension>
</Extensions>
</StatelessServiceType>
Highly recommended!
Azure Service Fabric makes it easy to implement the standard architecture for this scenario: a gateway service as a frontend for the clients to connect to and all the N backend services communicating with the front end gateway. There are a few communication API stacks available as part of Service Fabric that make it easy to communicate from clients to services and within services themselves. The communication API stacks provided by Service Fabric hide the details of discovering, connecting and retrying connections so that you can focus on the actual exchange of information. When using the Service Fabric communication APIs the services do not have to implement the mechanism of registering their names and endpoints to a specific routing service except what are the usual steps as part of creating the service itself. The communication APIs take in the service URI and partition key and automatically resolve and connect to the right service instance. This article provides a good starting point to help make a decision with regards to which communication APIs will be best suited for your particular case depending on whether you are using Reliable Actors or Reliable Services, or protocols such as HTTP or WCF, or the choice of programming language that the services are written in. At the end of the article you will find links to more detailed articles and tutorials for different communication APIs. For a tutorial on communication in Web API services see this.
We are using SF with a gateway pattern and about 13 services behind the gateway. We use the built in DNS service that SF provides, see: https://learn.microsoft.com/en-us/azure/service-fabric/service-fabric-dnsservice, this allows the internal service to service calls with known (internal to SF) DNS names, including gateway service to internal services. There are some well known asp.net core gateways (Ocelot, ProxyKit) to use, but we rolled our own. We have an external load balancer to route to multiple gateway instances in SF.
When a service is started, it registers it's endpoint with the fabric naming service. Using the Fabric client APIs you can then ask fabric for the registered endpoints, associated with the registered service name.
So yes, just as you described your case, you would have a gateway that would accept an incoming URI for connection, and then use that path information as the service name lookup, to then create a proxy connection between the incoming request and the actual internal endpoint location.
Looks like the team as posted one the samples that shows how to do this: https://github.com/Azure/servicefabric-samples/tree/master/samples/Services/VS2015/WordCount
This one may be simple, but can't find it. I understand that flows with SOAP nodes (SOAP Input for example) are exposed as web services in Message Broker. How can I consume them with soapUI?
As you should have a WSDL file specifying your web services in your soap nodes, you should take that WSDL, import it into soapUI, then specify the endpoint to your WMB machine (I think default port is 7080 or something like that). It should be pretty straight forward.