I have a Maven Project A (thirdparty) that uses the Shade plugin. I have another Project B that depends on it and refers to some of the shaded classes. If I have both projects open, there are compilation errors because Eclipse can't find these classes, since they don't exist in A/target/classes.
Is there a good way for me to set up Eclipse so that B looks into .m2 for Project A's classes, rather than just A/target?
Declaring the shaded dependencies of A as direct dependencies of B with scope provided should do the trick:
scope:
provided - this is much like compile, but indicates you expect the JDK or a container to provide it at runtime. It is only available on the compilation and test classpath, and is not transitive.
Since you have "about 50 projects" it's probably a good idea to introduce a new POM inheritance level:
Your top POM
Project A
New POM declaring shaded dependencies as provided
Projects like B that depend on A's shaded dependencies
50 POMs of grey
Related
In a Tycho build I have a pomless plugin-project/bundle A with some aspectj classes in it (*.aj). The project builds fine and another project B can reference project A via its manifest.mf.
Now a separate unittest project C exists for testing project A. This unittest project C is intended to be build with standard pom.xml and maven-surefire (no manifest.mf exists in C).
The problem is that C cannot find the *.aj classes of project A. If I introduce a pom.xml in project A with maven-aspectj-plugin then A can be build and C finds anything it needs in A. But then project B cannot find bundle A. Are there any suggestions to resolve such a problem?
I'm relativly new to Tycho and i assume the problem belongs to the mix of the pom-less approach in project A and the pom-based approach in unittest project C. Is there any possibility to build the mentioned unitest project C pom-based or do i need to build it with tycho-surefire ?
I found this related question
Aspectj class is not found by test class when running test with maven
but it didn't help for me in this case.
Thanks in advance.
pom.xml should be used in project A, with packaging type eclipse-plugin, no dependencies set, and the usual plugin setup of aspectj-maven-plugin
I have a maven project imported into Eclipse Oxygen. Eclipse reports no compile issues (Alt + F5). When I run maven from the command line I get
[ERROR] /home/dean/src/TAP3UIs/TAP3Desktop/src/main/java/com/ms/tap3/controller/RequestAccessController.java:[8,30] package com.google.common.base does not exist
That package does exist in my .m2/repository in guava-15.0.jar. I can also see it in Eclipse mvn dependencies. When I check the mvn dependency:tree for the project I see
[INFO] | | | +- com.google.guava:guava:jar:15.0:runtime
It is a runtime transitive dependency on the command line, which explains why it doesn't compile on the command line. Somehow Eclipse has turned a transitive dependency from runtime to compile.
Does anyone know why this happens and how I make Eclispe m2e respect the scope of the transitive dependencies?
Currently, neither JDT nor m2e support multiple classpaths per project which is required to support different scopes.
See: Eclipse bug 486035 - Different classpath containers for different scopes
Update:
Since Eclipse Photon (4.8) which was released in June 2018 this is now supported. See Eclipse bug 526858 and my video showing this in action.
The main point is this: If you import external classes in your source code, you must set them as compile dependencies, and never trust the fact that they might already be transitive dependencies (because, since they are transitive, you have not direct control over them, so in a future version they might diseappear as well).
What is happening is this:
You need some classes from com.google.common.base package, so you need to set com.google.guava:guava:jar:15.0 as a dependency.
Instead, you didn't because you realised it was already a transitive dependency, but you missed the fact that is a runtime dependency.
Eclipse M2 does not distinguish the different Maven's standard classpaths, so it treats all dependencies as if they were of "compile" scope. So Eclipse includes guava-15.0.jar in the compilation and the project is compiled OK.
Maven, instead, won't include a runtime dependency in the compilation phase, so a compile error is raised.
In brief: You should include guava-15.0 (as well as any other artifact your code needs) as a direct dependency (with compile scope) in your pom file.
I've managed to get JUnit 4.12 + Hamcrest 1.3 + Mockito 2.8.47 to work in Eclipse so that when I add them as dependencies, my tests will run.
(The way I've done this is using the p2-maven-plugin to bundle the following
artifacts from Maven Central into plugins/a feature and provide them via P2:
junit 4.12
org.mockito.mockito-core 2.8.47
org.hamcrest.all 1.3.0
Adding the plugins to my test fragment as dependencies makes the tests
run in Eclipse.
However, the Tycho build of the same fragment will fail with the
following messages:
java.lang.LinkageError: loader constraint violation: loader (instance of org/eclipse/osgi/internal/loader/EquinoxClassLoader) previously initiated loading for a different type with name "org/hamcrest/Matcher"
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:763)
at org.eclipse.osgi.internal.loader.ModuleClassLoader.defineClass(ModuleClassLoader.java:273)
at org.eclipse.osgi.internal.loader.classpath.ClasspathManager.defineClass(ClasspathManager.java:632)
at org.eclipse.osgi.internal.loader.classpath.ClasspathManager.findClassImpl(ClasspathManager.java:586)
at org.eclipse.osgi.internal.loader.classpath.ClasspathManager.findLocalClassImpl(ClasspathManager.java:538)
at org.eclipse.osgi.internal.loader.classpath.ClasspathManager.findLocalClass(ClasspathManager.java:525)
at org.eclipse.osgi.internal.loader.ModuleClassLoader.findLocalClass(ModuleClassLoader.java:325)
at org.eclipse.osgi.internal.loader.BundleLoader.findLocalClass(BundleLoader.java:345)
at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:423)
at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:372)
at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:364)
at org.eclipse.osgi.internal.loader.ModuleClassLoader.loadClass(ModuleClassLoader.java:161)
at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
at org.hamcrest.MatcherAssert.assertThat(MatcherAssert.java:12)
at org.junit.Assert.assertThat(Assert.java:956)
at org.junit.Assert.assertThat(Assert.java:923)
So it seems that some other plugin is loading the package
org.hamcrest.Matcher before my fragment does. This is probably due
to the import/export/partial import/partial export chaos surrounding the
JUnit/Hamcrest/Mockito setup.
Does anyone have an idea -- or even better: a working example -- of how to
get the three components work together both within the IDE (for quick
checks on whether tests run) and Tycho (for checks during the build)?
Seems like that the loader want the dependencies in a bundle.
But I guess you haven't put your test lib in a bundle.
You could try to add them in the dependencies of your product to see how it reacts.
Background
The root of the problem is, that org.junit already has a dependency to org.hamcrest.core. So when your test-plugins has a dependency to org.hamcrest.all (which contains everything of hamcrest-core and all other hamcrest artifacts), all classes specified in hamcrest-core exist twice. Once in the bundle of hamcrest-core and once in hamcrest-all, which is why you get the linkage error.
If you open the Manifest of org.junit in the Manifest-Editor of Eclipse and go to the 'Dependencies' tab it should show you org.hamcreast.core in the "Required Plug-ins" section and org.hamcreast.core should be re-exported. Or in the raw-manifest it should look like this:
Require-Bundle: org.hamcrest.core;bundle-version="1.3.0";visibility:=reexport
Solution 1 - add hamcrest sub-modules
Instead of adding the all hamcrest-modul containing hamcrest.all as dependency to my Eclipse test-bundle/project (via 'Require-Bundle'), I add the hamcrest sub-modules that I require, except for hamcrest-core (because it is already re-exported in my case). For me hamcrest-library was sufficient.
The available hamcrest sub-modules are (according to the org.hamcrest:hamcrest-parent pom, which can be found here: https://repo1.maven.org/maven2/org/hamcrest/hamcrest-parent/1.3/hamcrest-parent-1.3.pom):
hamcrest-core
hamcrest-library
hamcrest-generator
hamcrest-integration
Creating the p2-Repo containing the required bundles
When using Maven and the 'org.reficio:p2-maven-plugin' to build the p2-repo that contains the mentioned test-bundles, the conversion of the maven-artifacts to OSGi-bundles does not produce fully working results by default.
Converting a maven-module to a full OSGi-bundle consists mainly of configuring the MANIFEST.MF to contain proper entries. For this the p2-maven-plugin utilizes "bnd tool".
By default the Java packages provided by all maven dependencies of a maven module are added as optional Imported-package when that module is converted into a OSGi-bundle.
In my case this had the consequence that the org.hamcrest.library bundle refereed to the packages from hamcrest-core only via Import-Package in its MANIFEST.MF.
But unfortunately with only this specified, the Equinox-ClassLoader did not find the classes from hamcrest-core in the test-runtime and threw a corresponding exception. Maybe this is also caused by the fact that hamcrest-core and hamcrest-library have a package "org.hamcrest" and bnd-tools adds the exported packages of a bundle to the imported packages again.
The solution in my case was to instruct the org.reficio:p2-maven-plugin respectively bnd-tools to add org.hamcrest.core as "Require-Bundle" to the Manifest of hamcrest-library. For this, the instructions-element shown below needs to be add to the artifact-element of org.hamcrest:hamcrest-library in the execution-configuration of the 'p2-maven-plugin' in the pom.xml used to build the p2-repo:
<artifact>
<id>org.hamcrest:hamcrest-library:1.3</id>
<instructions>
<Require-Bundle>org.hamcrest.core</Require-Bundle>
</instructions>
</artifact>
If hamcrest sub-modules other than hamcrest-library are are used, the instructions need to be analogous, corresponding to the dependencies listed in their pom.
Edit
Eclipse Orbit provides org.hamcrest.library, org.hamcrest.integrator and org.hamcrest.generator bundles that have have org.hamcrest.core as required bundle (if necessary):
https://download.eclipse.org/tools/orbit/downloads/
Appendix
In the end first solution caused a SecurityException:
java.lang.SecurityException: class "org.hamcrest.Matchers"'s signer information does not match signer information of other classes in the same package
Which is a known issue. The following two solutions avoid this issue and work properly during Tycho builds and from within Eclipse.
Solution 2 - bundle hamcrest sub-module jars with a plug-in
Another approach is to download the jar of the required hamcrest sub-module and bundle it with a Eclipse plugin directly, like it is described here:
https://www.vogella.com/tutorials/Hamcrest/article.html#hamcrest_eclipse
To bundle the jar with a plug-in, include it in the project and add it to the plug-ins classpath. Go to the Runtime-Tab of the Manifest-Editor and klick Add... in the Classpath section and select the jar. This should add the jar to the .classpath, MANIFEST.MF and build.properties file properly.
Make sure the jar is included before the other plug-in dependencies (which include hamcrest-core), as stated in the mentioned tutorial.
If hamcrest should be used in multiple test-projects/fragments, add the jar to a test plug-in all other test-projects depend on.
Solution 3 - use org.hamcrest 2.x
Since hamcrest-2 there is only one org.hamcrest jar/artifact that includes everything from hamcrest. Using hamcrest 2 avoids all the issues and is my preferred solution. Except for the changed packaing of hamcrest the API did not break, so it should be sufficient to just include org.hamcrest:
https://github.com/hamcrest/JavaHamcrest/releases/tag/v2.1
In order to create a p2-repo that includes org.hamcrest-2.2 the following sippet has to be included into the configuration-artifacts element of the p2-maven-plugin execution in the pom.xml:
<artifact>
<id>org.hamcrest:hamcrest-core:2.2</id>
<instructions>
<Require-Bundle>org.hamcrest;bundle-version="2.2.0";visibility:=reexport</Require-Bundle>
</instructions>
</artifact>
<artifact>
<id>org.hamcrest:hamcrest:2.2</id>
</artifact>
The IUs org.hamcrest.core 2.2 and org.hamcrest have to be included in the target-platform to make them available for plug-ins in Eclipse and during. All plug-ins which depend on org.junit now have org.hamcrest also available.
This aproach works because org.hamcrest.core still exists in version 2 stream, even tough it is deprected and empty. Its only purpose is to redirect build-systems to the new org.hamcrest-2.x jar/artifact. Therefore org.hamcrest.core-2.2 specifies a compile dependency to
org.hamcrest-2.2 in its pom.xml. Unfortunately the p2-maven-plugin dosn't translate it directly into a bundle-requirement for org.hamcrest in the manifest, but with the sippet above enforces that.
Because org.junit requires the bundle org.hamcrest.core with a minimal version of 1.3 (but without upper-bound) it uses the present org.hamcrest.core-2.2 . org.hamcrest.core-2.2 again requires org.hamcrest-2.2 and re-exports it. This makes org.junit use org.hamcrest-2.2 in the end and because org.junit re-exports hamcrest-core it also provides org.hamcrest-2.2 immediately to all depended plug-ins.
Note
If you want to play around with different variants of a jar, don't forget to clear (means delete on the drive) the bundle pools of Maven (in <your-home>/.m2/repository/p2/osgi/bundle/ and Eclipse PDE (in <your-workspace>/.metadata/.plugins/org.eclipse.pde.core/.bundle_pool/) in between. Otherwise you will always use the first one, because jar's with the same version are not updated.
I have imported a project (I am very new at this) and I get the following errors:
Project cannot be built until build path errors are resolved
Project FST is missing required library: 'C:program Files/Apache Group/Tomcat 4.1/common/lib/servlet.jar'
Project FST is missing required library: 'C:program Files/Apache Group/Tomcat 4.1/common/lib/struts.jar'
The project cannot be built until build path errors are resolved
Unbound classpath variable: 'TOMCAT_HOME/common/lib/jasper-runtime.jar' in project
Unbound classpath variable: 'TOMCAT_HOME' in project FST
I create a variable called TOMCAT_HOME and give it the proper directory ,but Also, we should change the project classpath to use TOMCAT_HOME rather than the absolute path.
i dont know how to do it (change the project classpath and the absolute path)
thanks !
To answer somewhat indirectly, if you configure your project build with something like Maven or Gradle, so that you can successfully build the project using the corresponding command-line tool, then it should be quite straightforward to import the project into eclipse using the Maven or Gradle eclipse plugin. I think doing so will be worth whatever trouble it causes you in the short run--just take care to make your project structure conform to the usual project structure that Maven expects or you'll be asking for trouble (it should be no problem to do so for greenfield work).
I am building a Java (web) application with Maven and Eclipse.
When I look inside my .war file I can see the following logging libraries there:
log4j-1.2.14.jar
log4j-1.2.17.jar
slf4j-api-1.7.5.jar
slf4j-log4j12-1.7.5.jar
I did not declared these libraries in my pom.xml, so they probably are transitive dependencies (i.e. dependencies of my dependencies).
How can I find out which of my dependencies depend on these libraries?
I tried to use the mvn dependency:tree plugin, but it does not show any of these .jars.
In Eclipse, the Java Resources > Libraries > Maven Dependencies node does not show them either. Though, curiously, it shows other transitive dependencies of my project.
If you want to rely on maven only you may want to take a closer look on the dependency plugin, here are two examples:
mvn dependency:tree -Dverbose will display more detailed information - especially for example if a artifact will be omitted for conflicting with another artifacts version (e.g. convergence issue). It will also display you the hirachy with all the transitive dependencies.
To have a specific artefact analyzed (to for example find who delivers a specific transitive dependency) you can specify like so:
mvn dependency:tree -Dincludes=com.my.group.id:my-artefact-id:jar:1.0.1 -Dverbose
(Where you obviously need to adjust the artefact, packaging type and version according to your needs)
Open pom.xml in Eclipse and go to Dependency Hierarchy tab
![enter image description here][1]
It should show you the dependency tree in the Dependency Hierarchy tab. Evgeniy Dorofeev is right.
Something similar to the screenshot attached
you would probably have to expand all.
EDIT: Refined the answer.
Thats a little weird. But here is what i found.
If you go to http://mvnrepository.com/artifact/log4j/log4j/1.2.17
it will show you which dependencies are used and which does the jar file depend on.
The springframework dependency for web-mvc 3.2.4 would download the spring-core and the spring-core dependency uses log4j.