I am using install4j and I want to call rest api's from installer.
I have searched documentation for HTTP request action but not able to find, so my problem is,
I want to sent json with http request using post method, for that I have provided following properties:
Request Headers : Content-Type=application/json,
Form data = key1=value1;key2=value2;....keyN=valueN,
URL=http://localhost:8180/ng/app-setting
But I am not understanding, how to provide authentication details?.
When I run installer file http request execution is start and ask username password after that error message displayed which I was set in properties, But how installer provide exact error message? Because I am not getting what is exact error or what is response message/code?
Please provide the solution and documentation links.
Also let me know the steps how to provide http request (with REST) POST method with json.
how to provide authentication details
To set the authentication programmatically, set the system properties serverAuthUser and serverAuthPassword in the installer.
how to provide http request (with REST) POST method with json.
Currently this is not possible. I've added this to our issue tracker.
Update 2017-11-13
As of 6.1, when you set the "HTTP request method" property of the "HTTP request" action to "POST", a "Custom request body" child property is shown. If selected, the "Content type" and "Request body" properties can be configured.
Related
I have designed an API REST service (with Bonita) to which I can perfectly connect with Postman, with the following parameters:
By the way, the x-www-form-urlencoded option that is selected comes from the Content-type application/x-www-form-urlencoded header that is not displayed in my screenshot. The official Bonita specification states that this header is needed and I always get a 200-OK status code as an answer.
How can I specify an equivalent request with the body part in a Mendix Call REST service in a microflow? Here is what I have so far:
I guess the body part should be specified in the Request tab, but I just don't know how to do it properly. I always get the following error message for my connector, which means that, whatever I specify, the username is not taken into account:
An error has occurred while handling the request. [User 'Anonymous_69a378ed-bb56-4183-ae71-c9ead783db1f' with session id '5fefb6ad-XXXX-XXXX-XXXX-XXXXXXXXb34f' and roles 'Administrator']
I finally found that the proxy setting was the actual problem. It was set at the project scope and simply clicking on No proxy in the General tab did the trick! (both services are hosted on my local machine so far)
I just had to fill in the dedicated Authentication field in the HTTP Headers tab then, with the correct credentials, to eventually log in my Bonita service.
I was trying to setup Jmeter for Salesforce API testing. However getting the below error during Salesforce authorization:
"error":"unsupported_grant_type","error_description":"grant type not
supported"
I am passing the parameters as in the screenshots attached. The same parameters when passed in Postman works fine, however I am getting this error in Jmeter. Please let me know if I am making some error in passing the parameters in Jmeter.
Jmeter_HTTP Header Manager
Jmeter_HTTP Request
Jmeter_Sampler Result
According to HTTP Status Code 400 documentation
The HyperText Transfer Protocol (HTTP) 400 Bad Request response status code indicates that the server cannot or will not process the request due to something that is perceived to be a client error (e.g., malformed request syntax, invalid request message framing, or deceptive request routing).
Looking into your request, you're sending Content-Type header as application/json therefore your server expects JSON and you're providing something different.
My expectation is that you should switch to Body Data tab of the HTTP Request sampler and set the request body to look like:
Check out REST API Testing - How to Do it Right article for more information on REST APIs testing using JMeter.
I struggle with the same issue but it finally worked for me by doing the following:
Use Content-Type application/x-www-form-urlencoded in an HTTP Header Manager
Make sure is a POST Method and that you're using https
Not sure if it is necessary but in the Parameters tab make sure all (grant_type, password, client_secret_ client_id and username) are Content-Type application/x-www-form-urlencoded and check the URL Encode option for all
Only check "Follow Redirects" and "Use KeepAlive" options in the HTTP Request
hope it works for you too
Like the title says I think I have a problem with the "Test RESTful web service" client. When I make a GET request, the request parameters, for example ?test=1&b=2 would be added. When I make a POST request, they are not added anymore.
Is this normal behaviour, or a bug in the client? And is allowing the request parameters when using a POST method a good practice?
Known issue, please vote for WEB-10584
I am using PostMan as a REST client to test this API method Cisco ACL Analysis API. specifically POST /acl/trace or getAClTracksStd (first go to Policy Analysis)
Here is my PostMan HTTP test call
Does anyone who is familiar with PostMan understand why I am getting this "Request method 'GET' is not supported" error from the server? I am making a POST HTTP request, not GET.(Selected from Drop down menu) It make more sense for me to get a input invalid parameter error or something.
Just to show that the endpoint url works, heres a HTTP test request that works
(same link, host->host API -> GET /host/{startIndex}/{recordsToReturn}
There's two issues that I'm seeing with your REST call. First, the error you're seeing is because the call needs to be preceded by "https://". Second, remove the interface IDs parameter and values. You should get a response with data after making these changes.
Your json looks erronuous (comma after the destIp) - and the server probably always responds with a default confusing error message in this case. (Postman is very well tested and it sends POST).
I developed a rest server, and I put it to run in localhost, and I'm trying to perform tests with JMeter, sending requests posts and gets (depends of called method).
I already send to Rest server and got result with JMeter in simple post requests, get requests, sending files with post, and sending a Json with post.
But I don't know how to send a Form-UrlEncoded object to server. My Rest server consumes application/x-www-form-urlencoded, and I need to send 3 String parameters.
There's some way to set the MimeType for every parameter and perform the test ?
I'm using Jmeter 2.7
[Update]
I solved this by disabling the option:
use multipart/form-data for post
And enabling:
redirect automatically
Instead of:
follow redirect
The parameters I put normally in the table "Send parameters with the Request" with each respective names.
For sending form parameters as application/x-www-form-urlencoded, add a header parameter Content-Type with value application/x-www-form-urlencoded.
The following steps is aplicable for Jmeter 2.3.4
Add a HTTP Header Manager under your http Request.
Add new parameter to HTTP Header Manager with name Content-Type and value application/x-www-form-urlencoded.
Uncheck "Use multipart/form-data for HTTP POST" of HTTP request.
Uncheck "Encode?" of each request parameter(not necessary).
kept "Content Encode:" text box of HTTP request as empty.
This won't work for PUT request.
For put request add parameters as path parameter and set Content-Type header then Jmeter will do by itself.
Here's the solution for HTTP POST with x-www-form-urlencoded testing with jmeter. You just folllow like these.
Go to Thread Group -> Add listener -> Views Result in table, View result Tree. To see the process of responding.
Have you tried to save your test using BadBoy or JMeter Proxy to see what your application actually sends?
To see what happens under the hood you can also use FireBug if you're using FireFox or Ctrl+Shift+i if you're on Chrome.
IllegalCharsetNameException will go immediately only after you will add the required content-type in HTTP Header Manager for HTTP request .
Hope this helps.
followed exact steps mentioned i still see an exception thrown
Response code: Non HTTP response code: java.nio.charset.IllegalCharsetNameException
Response message: Non HTTP response message: application/x-www-form-urlencoded
java.nio.charset.IllegalCharsetNameException: application/x-www-form-urlencoded
at java.nio.charset.Charset.checkName(Charset.java:315)
at java.nio.charset.Charset.lookup2(Charset.java:484)
at java.nio.charset.Charset.lookup(Charset.java:464)
at java.nio.charset.Charset.forName(Charset.java:528)
at org.apache.http.entity.ContentType.create(ContentType.java:210)
at org.apache.http.entity.StringEntity.<init>(StringEntity.java:116)
at org.apache.jmeter.protocol.http.sampler.HTTPHC4Impl.sendPostData(HTTPHC4Impl.java:1340)
at org.apache.jmeter.protocol.http.sampler.HTTPHC4Impl.handleMethod(HTTPHC4Impl.java:592)
at org.apache.jmeter.protocol.http.sampler.HTTPHC4Impl.sample(HTTPHC4Impl.java:409)
at org.apache.jmeter.protocol.http.sampler.HTTPSamplerProxy.sample(HTTPSamplerProxy.java:74)
at org.apache.jmeter.protocol.http.sampler.HTTPSamplerBase.sample(HTTPSamplerBase.java:1166)
at org.apache.jmeter.protocol.http.sampler.HTTPSamplerBase.sample(HTTPSamplerBase.java:1155)
at org.apache.jmeter.threads.JMeterThread.executeSamplePackage(JMeterThread.java:475)
at org.apache.jmeter.threads.JMeterThread.processSampler(JMeterThread.java:418)
at org.apache.jmeter.threads.JMeterThread.run(JMeterThread.java:249)
at java.lang.Thread.run(Thread.java:745)