I know that s means separate, but I can not figure it out here:
sed "s/<\/tr/\n<\//g;s/<\/font>/<\/font>\n/g"
could you please explain what does that mean ?
s doesn't mean separate, instead, it means substitute.
\n here means linebreak
g is a flag of s command, which will do substitute on all matched occurrences
sed "s/<\/tr/\n<\//g; :replace all </tr by (linebreak)</
s/<\/font>/<\/font>\n/g" :replace all </font> by </font>(linebreak)
same as
sed 's#</tr#\n</#g; s#</font>#&\n#g'
if you want to add linebreak before </tr>, the sed line won't do that, you could do:
sed 's#</tr>#\n&#g; s#</font>#&\n#g'
here the & means referencing the matched part.
Related
I'm trying to come up with a sed script to take all lines containing a pattern and move them to the end of the output. This is an exercise in learning hold vs pattern space and I'm struggling to come up with it (though I feel close).
I'm here:
$ echo -e "hi\nfoo1\nbar\nsomething\nfoo2\nyo" | sed -E '/foo/H; //d; $G'
hi
bar
something
yo
foo1
foo2
But I want the output to be:
hi
bar
something
yo
foo1
foo2
I understand why this is happening. It is because the first time we find foo the hold space is empty so the H appends \n to the blank hold space and then the first foo, which I suppose is fine. But then the $G does it again, namely another append which appends \n plus what is in the hold space to the pattern space.
I tried a final delete command with /^$/d but that didn't remove the blank line (I think this is because this pattern is being matched not against the last line, but against the, now, multiline pattern space which has a \n\n in it.
I'm sure the sed gurus have a fix for me.
This might work for you (GNU sed):
sed '/foo/H;//!p;$!d;x;//s/.//p;d' file
If the line contains the required string append it to the hold space (HS) otherwise print it as normal. If it is not the last line delete it otherwise swap the HS for the pattern space (PS). If the required string(s) is now in the PS (what was the HS); since all such patterns were appended, the first character will be a newline, delete the first character and print. Delete whatever is left.
An alternative, using the -n flag:
sed -n '/foo/H;//!p;$!b;x;//s/.//p' file
N.B. When the d or b (without a parameter) command is performed no further sed commands are, a new line is read into the PS and the sed script begins with the first command i.e. the sed commands do not resume following the previous d command.
Why? Stuff like this is absolutely trivial in awk, awk is available everywhere that sed is, and the resulting awk script will be simpler, more portable, faster and better in almost every other way than a sed script to do the same task. All that hold space stuff was necessary in sed before the mid-1970s when awk was invented but there's absolutely no use for it now other than as a mental exercise.
$ echo -e "hi\nfoo1\nbar\nsomething\nfoo2\nyo" |
awk '/foo/{buf = buf $0 RS;next} {print} END{printf "%s",buf}'
hi
bar
something
yo
foo1
foo2
The above will work as-is in every awk on every UNIX installation and I bet you can figure out how it works very easily.
This feels like a hack and I think it should be possible to handle this situation more gracefully. The following works on GNU sed:
echo -e "hi\nfoo1\nbar\nsomething\nfoo2\nyo" | sed -r '/foo/{H;d;}; $G; s/\n\n/\n/g'
However, on OSX/BSD sed, results in this odd output:
hi
bar
something
yonfoo1
foo2
Note the 2 consecutive newlines was replaced with the literal character n
The OSX/BSD vs GNU sed is explained in this article. And the following works (in GNU SED as well):
echo -e "hi\nfoo1\nbar\nsomething\nfoo2\nyo" | sed '/foo/{H;d;}; $G; s/\n\n/\'$'\n''/'
TL;DR; in BSD sed, it does not accept escaped characters in the RHS of the replacement expression and so you either have to put a true LF/newline in there at the command line, or do the above where you split the sed script string where you need the newline on the RHS and put a dollar sign in front of '\n' so the shell interprets it as a line feed.
I want to insert a range of lines from a file, say something like 210,221r before the first occurrence of a pattern in a bunch of other files.
As I am clearly not a GNU sed expert, I cannot figure how to do this.
I tried
sed '0,/pattern/{210,221r file
}' bunch_of_files
But apparently file is read from line 210 to EOF.
Try this:
sed -r 's/(FIND_ME)/PUT_BEFORE\1/' test.text
-r enables extendend regular expressions
the string you are looking for ("FIND_ME") is inside parentheses, which creates a capture group
\1 puts the captured text into the replacement.
About your second question: You can read the replacement from a file like this*:
sed -r 's/(FIND_ME)/`cat REPLACEMENT.TXT`\1/' test.text
If replace special characters inside REPLACEMENT.TXT beforehand with sed you are golden.
*= this depends on your terminal emulator. It works in bash.
In https://stackoverflow.com/a/11246712/4328188 CodeGnome gave some "sed black magic" :
In order to insert text before a pattern, you need to swap the pattern space into the hold space before reading in the file. For example:
sed '/pattern/ {
h
r file
g
N
}' in
However, to read specific lines from file, one may have to use a two-calls solution similar to dummy's answer. I'd enjoy knowing of a one-call solution if it is possible though.
I'm having issues matching strings even if they start with any number of white spaces. It's been very little time since I started using regular expressions, so I need some help
Here is an example. I have a file (file.txt) that contains two lines
#String1='Test One'
String1='Test Two'
Im trying to change the value for the second line, without affecting line 1 so I used this
sed -i "s|String1=.*$|String1='Test Three'|g"
This changes the values for both lines. How can I make sed change only the value of the second string?
Thank you
With gnu sed, you match spaces using \s, while other sed implementations usually work with the [[:space:]] character class. So, pick one of these:
sed 's/^\s*AWord/AnotherWord/'
sed 's/^[[:space:]]*AWord/AnotherWord/'
Since you're using -i, I assume GNU sed. Either way, you probably shouldn't retype your word, as that introduces the chance of a typo. I'd go with:
sed -i "s/^\(\s*String1=\).*/\1'New Value'/" file
Move the \s* outside of the parens if you don't want to preserve the leading whitespace.
There are a couple of solutions you could use to go about your problem
If you want to ignore lines that begin with a comment character such as '#' you could use something like this:
sed -i "/^\s*#/! s|String1=.*$|String1='Test Three'|g" file.txt
which will only operate on lines that do not match the regular expression /.../! that begins ^ with optional whiltespace\s* followed by an octothorp #
The other option is to include the characters before 'String' as part of the substitution. Doing it this way means you'll need to capture \(...\) the group to include it in the output with \1
sed -i "s|^\(\s*\)String1=.*$|\1String1='Test Four'|g" file.txt
With GNU sed, try:
sed -i "s|^\s*String1=.*$|String1='Test Three'|" file
or
sed -i "/^\s*String1=/s/=.*/='Test Three'/" file
Using awk you could do:
awk '/String1/ && f++ {$2="Test Three"}1' FS=\' OFS=\' file
#String1='Test One'
String1='Test Three'
It will ignore first hits of string1 since f is not true.
I want to insert a newline after the following pattern
lcl|NC_005966.1_gene_750
While the last number(in this case the 750) changes. The numbers are in a range of 1-3407.
How can I tell sed to keep this pattern together and not split them after the first number?
So far i found
sed 's/lcl|NC_005966.1_gene_[[:digit:]]/&\n/g' file
But this breaks off, after the first digit.
Try:
sed 's/lcl|NC_005966.1_gene_[[:digit:]]*/&\n/g' file
(note the *)
Alternatively, you could say:
sed '/lcl|NC_005966.1_gene_[[:digit:]]/G' file
which would add a newline after the specified pattern is encountered.
sed 's/lcl|NC_005966\.1_gene_[[:digit:]][[:digit:]]*/&\
/g' file
You need to escape . as it's an RE metacharacter, and you need [[:digit:]][[:digit:]]* to represent 1-or-more digits and you need to use \ followed by a literal newline for portability across seds.
I have a file of string records where one of the fields - delimited by "," - can contain one or more "-" inside it.
The goal is to delete the field value if it contains more than two "-".
i am trying to recoup my past knowledge of sed/awk but can't make much headway
==========
info,whitepaper,Data-Centers,yes-the-6-top-problems-in-your-data-center-lane
info,whitepaper,Data-Centers,the-evolution-center
info,whitepaper,Data-Centers,the-evolution-of-lan-technology-lanner
==========
expected outcome:
info,whitepaper,Data-Centers
info,whitepaper,Data-Centers,the-evolution-center
info,whitepaper,Data-Centers
thanks
Try
sed -r 's/(^|,)([^,-]+-){3,}[^,]+(,|$)/\3/g'
or if you're into slashes
sed 's/\(^\|,\)\([^,-]\+-\)\{3,\}[^,]\+\(,\|$\)/\3/g'
Explanation:
I'm using the most basic sed command: substitution. The syntax is: s/pattern/replacement/flags.
Here pattern is (^|,)([^,-]+-){3,}[^,]+(,|$), replacement is \3, flags is g.
The g flag means global replacement (all matching parts are replaced, not only the first in line).
In pattern:
brackets () create a group. Somewhat like in math. They also allow to refer to a group with a number later.
^ and $ mean beginning and end of the string.
| means "or", so (^|,) means "comma or beginning of the string".
square brackets [] mean a character class, ^ inside means negation. So [^,-] means "anything but comma or hyphen". Not that usually the hyphen has a special meaning in character classes: [a-z] means all lowercase letters. But here it's just a hyphen because it's not in the middle.
+ after an expression means "match it 1 or more times" (like * means match it 0 or more times).
{N} means "match it exactly N times. {N,M} is "from N to M times". {3,} means "three times or more". + is equivalent to {1,}.
So this is it. The replacement is just \3. This refers to the third group in (), in this case (,|$). This will be the only thing left after the substitution.
P.S. the -r option just changes what characters need to be escaped: without it all of ()-{}| are treated as regular chars unless you escape them with \. Conversely, to match literal ( with -r option you'll need to escape it.
P.P.S. Here's a reference for sed. man sed is your friend as well.
Let me know if you have further questions.
You could try perl instead of sed or awk:
perl -F, -lane 'print join ",", grep { !/-.*-.*-/ } #F' < file.txt
This might work for you:
sed 's/,\{,1\}[^,-]*\(-[^,]*\)\{3,\}//g file
sed 's/\(^\|,\)\([^,]*-\)\{3\}[^,]*\(,\|$\)//g'
This should work in more cases:
sed 's/,$/\n/g;s/\(^\|,\|\n\)\([^,\n]*-\)\{3\}[^,\n]*\(,\|\n\|$\)/\3/g;s/,$//;s/\n/,/g'