I've recently completed the installation instructions for Haskell, and have reached the final step where I run
ihaskell install
to install the IHaskell kernel into Jupyter. However at this point I'm stuck, with the error
Detected IPython, but could not parse version number.
ihaskell:
Ran commands:
which ipython
/usr/local/bin/ipython --version
which /usr/local/bin/ipython
Exception: ExitFailure 1
which makes no sense, since when I run those commands myself, I get a valid (and required) version number:
$ which ipython
/usr/local/bin/ipython
$ /usr/local/bin/ipython --version
4.0.0
$ which /usr/local/bin/ipython
/usr/local/bin/ipython
How do I proceed to install the IHaskell kernel into Jupyter?
This is a (soon to be addressed) limitation of the current version of IHaskell, which only supports IPhython 3.0.
Stepping back to 3.0 with
pip uninstall ipython
pip uninstall jupyter_core
pip install ipython[notebook]==3.0
will resolve the problem until IHaskell is updated, at which point it will be safe to restore the current version of IPython with
pip install ipython[notebook] --upgrade
Note that stepping back to 3.0 will result in view visible differences, though the expected location of settings files will change.
Related
└─$ python3 -m venv venv
Error: name 'cmd' is not defined
┌──()-[~/Documents/Software Development/DjangoAuth/simplejwt]
└─$ source venv/bin/activate
source: no such file or directory: venv/bin/activate
It used to work fine on my other laptop while I just freshly installed new OS here, it throwing an odd error.
This bug report (found by search) suggests you don't have python-venv package installed. Install it:
sudo apt-get install -y python3-venv
The error message is due to a conflict in the versions of Python installed on my system. The package python3.10-venv depends on version 3.10.8-3 of Python, but version 3.10.9-1 is to be installed.
To resolve this issue, I tried the following:
Check the version of Python I have installed by running the command python3 --version.
If I have a version of Python other than 3.10.8-3, I tried uninstalling it and installing version 3.10.8-3 instead.
Once I have installed the correct version of Python, I install the python3-venv package again using the sudo apt-get install -y python3-venv command and it worked.
Thanks all who helped!
I have installed Raspbian Lite OS in Raspberry Pi zero.
I found that Raspbian Lite comes with Python3 as default.
But I am gonna run some scripts that uses libraries that are Python2 Compatible.
So I tried to change the default Python version from Python3 to Python2 (Specifically Python2.7.18)
After so much searching and trying, instructions from [this page][1] made my job
Now if I try to check in command writing
python --version
It shows me that it is Python2.7.18
But the problem is I am not being able to install any packages using
sudo apt-get install <python-packagename>
It shows me Errors like
1.Package "python-pip" has no installation candidate (When I tried to install pip)
2. Package python-numpy has no installation candidate (when I tried to install numpy)
3. unable to locate package python-pyaudio (when I tried to install pyaudio)
I am searching but no solution.
Can anyone please help? I am frozen in a critical stage of my project .
Generally, for new raspbian/raspios os with python 3 by default, it is not suggested to replace the system python interpreter to python 2, it may break some system component's dependency.
Instead, you can create a python 2 virtual env, if you need to run python2 scripts.
sudo apt-get install python3-pip
pip install virtualenv
virtualenv -p /usr/bin/python2.7 venv
source venv/bin/activate
You can test the python version as following,
(venv) $ python --version
~ $ gdalinfo --version
gdalinfo: symbol lookup error: /lib/libgdal.so.28: undefined symbol: proj_crs_get_datum_ensemble
Recently upgraded to Ubuntu 21.04 and things stopped working, tried removing all gdal, qgis installation and reinstall again and this is the latest. Previous error was https://gist.github.com/adoug/f551c96ae49bcf0dd4905cfb3ed1c910. Installing qgis from gui also comes up with an error Unable to install QGIS Desktop: Error while installing package: installed qgis-providers package post-installation script subprocess returned error exit status 127
~ $ pip3 install gdal
Requirement already satisfied: gdal in /usr/lib/python3/dist-packages (3.2.2)
~ $ pip3 uninstall gdal
Found existing installation: GDAL 3.2.2
Not uninstalling gdal at /usr/lib/python3/dist-packages, outside environment /usr
Can't uninstall 'GDAL'. No files were found to uninstall.
The whole install seems to be broken, is there a way to clean all and resinstall or somehow recover from this?
Not really for a fix for current issue, but used fresh anaconda install as a workaround to get gdal working again
conda update --all
conda install -c conda-forge gdal
I have two servers that are running CentOS 7.8 with all the latest patches as of the date of this post. On one server I can create a venv, and on the other I get an error. Here is the command used to create the venv:
python3.6 -m venv venv
The error is:
Error: Command '['/root/venv/bin/python3.6', '-Im', 'ensurepip', '--upgrade', '--default-pip']' returned non-zero exit status 1.
So it seems there is a problem after the venv is created. In fact, it makes the links to the python interpreters in venv/bin, but the lib64/python3.6 and lib/python3.6 directories that are created have only empty site-packages in them. I get the problem whether running the command with root privileges (as above) or as a non-privileged user. On the other system, which is not quite the same hardware but very similar, I get no errors.
I have tried a bunch of things including completely uninstalling all the python3 rpms and reinstalling them on both systems. The python3 modules installed are:
python3, python3-devel, python3-libs, python3-other-rpm-macros, python3-pip, python3-rpm-generators, python3-setuptools, python3-tkinter, python3-wheel. All these are installed using the centos repos.
I have searched the internet and one thing that works is to use --no-pip. However, not surprisingly, if I do that I get a venv with no pip, which does not work very well. The version of pip that is installed with the rpm is version 9.0.3. However, I have tried upgrading pip:
python3.6 -m pip install --upgrade pip
This installs pip 20.1. Interestingly, it is installed in /usr/local/lib/python/site-packages. In any event, it doesn't change anything and I get essentially the same error message.
I have even gone as far as rsyncing the /usr/lib/python3.6 and /usr/lib64/python3.6 (using -avu --delete) on the two servers so that they are identical. All to no avail. I am at a loss to know what to do.
I can of course hack things to make them work, but since I am using this to automatically build test environments I really need to get it working automatically. Suggestions would be greatly appreciated.
I've had the same issue on CentOS Linux release 7.9.2009 (Core) and solved it by installing the following system packages:
yum install python36-devel
yum install python36-setuptools
yum install python36-virtualenv
python3.6 -m pip install --upgrade pip
Used virtualenv to install the venv into the project-root:
python3 -m virtualenv venv-dev
After sourcing the venv everything looks good and I could install the needed requirements:
. ./venv-dev/bin/activate
python3 --version
Python 3.6.8
pip3 --version
pip 21.1.1 from /project/root/dir/venv-dev/lib/python3.6/site-packages/pip (python 3.6)
pip3 install -r requirements/dev.txt
Successfully installed ...
How to install TensorFlow on Python 3.7
Trying:
D:\Users\Downloads>pip install tensorflow
ERROR: Could not find a version that satisfies the requirement tensorflow (from versions: none)
ERROR: No matching distribution found for tensorflow
Windows 10 OS
And with vent error, too
(venv) C:\Users\KvaksManYT>pip install --upgrade tensorflow
ERROR: Could not find a version that satisfies the requirement tensorflow (from versions: none)
ERROR: No matching distribution found for tensorflow
I would recommend using a virtual environment using pip install vitualenv. Then, depending on your OS, you want to create and activate an environment.
python3 -m venv /path/to/new/virtual/environment
Then, activate this environment using,
source ./venv/bin/activate
Now, you can install any Python packages you want.
pip install tensorflow==2.0.0
you can install Tensorflow follow those steps
Ubuntu/Linux /mac os /windows
virtualenv does not require a mention pip version
for system install, you need to mention pip version
upgrade pip version
pip install --upgrade pip
#virtualenv install
pip install --upgrade tensorflow
#system install
pip3 install --user --upgrade tensorflow
reference https://www.tensorflow.org/install/pip
I had the same problem with Windows 10 x64, and it was caused because I was using the wrong Python version, both globally and in the venv. I found questions on the issue multiple times on the internet, including yours.
Be sure to use Python versions 3.5-3.8, as per requirements, but also x64, not x32.
Namely, I ran into this error using both
a venv with 3.9.1 x64 (python --version),
and my globally installed 3.8.2 x32 (python3 --version).
So, I downloaded the x64-version of Python 3.8.6 from here.
Note that the command venv does not allow specifying the python version used in the virtual environment,
as per an answer on this question. So I used virtualenv, which I obviously had to install in my global Python version first.
To specify the Python version used in the venv, I used the command virtualenv, as in:
virtualenv --python="C:\Users\me\AppData\Local\Programs\Python\Python38\python.exe myvenv
where you have to give the path to the newly downloaded Python distribution you want to use, if there are several on your PC (for example, I had Python38-32 and Python39 folders in that directory).
Check Python versions in virtual environment
After I activate my myvenv, created as above, I verify the Python versions as follows:
python3 --version
> Python 3.8.2
python --version
> Python 3.8.6
Then, using the command
import struct
print(struct.calcsize("P") * 8)
Within either python3 or python, shows me whether the version is 32bit or 64bit, as per this answer. The python returns a 64, so that is the one you want to use (not python3).
Finally, within the virtual environment, you can run
pip install --upgrade tensorflow
and it will download and install. (Meanwhile, pip3 install --upgrade tensorflow would still return your error inside and outside the virtual enviroment.)