ORA-12505, TNS:listener does not currently know of SID given in connect descriptor using oracle sql developer - oracle-sqldeveloper

Question

i have gone through the forum to look for a solution for hours on end, i haven't encountered anyone with the same predicament as i have. I have installed Oracle 12c 64 bit on windows 8.1 64 bit system. When i try to make a new connection to the database, using oracle sql developer, run into this error, being a newbie to oracle database, i did try to run lsnrctl start i got
LSNRCTL for 64-bit Windows: Version 12.1.0.2.0 - Production on 18-OCT-2015 19:00
:45
Copyright (c) 1991, 2014, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1539)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 61: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521_1)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
64-bit Windows Error: 2: No such file or directory
I tried to make sense of it but i coudn't.
Here is my listener.ora
# copyright (c) 1997 by the Oracle Corporation
#
# NAME
# listener.ora
# FUNCTION
# Network Listener startup parameter file example
# NOTES
# This file contains all the parameters for listener.ora,
# and could be used to configure the listener by uncommenting
# and changing values. Multiple listeners can be configured
# in one listener.ora, so listener.ora parameters take the form
# of SID_LIST_<lsnr>, where <lsnr> is the name of the listener
# this parameter refers to. All parameters and values are
# case-insensitive.
# <lsnr>
# This parameter specifies both the name of the listener, and
# it listening address(es). Other parameters for this listener
# us this name in place of <lsnr>. When not specified,
# the name for <lsnr> defaults to "LISTENER", with the default
# address value as shown below.
#
# LISTENER =
# (ADDRESS_LIST=
# (ADDRESS=(PROTOCOL=tcp)(HOST=localhost(PORT=1521))
# (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
# SID_LIST_<lsnr>
# List of services the listener knows about and can connect
# clients to. There is no default. See the Net8 Administrator's
# Guide for more information.
#
# SID_LIST_LISTENER=
# (SID_LIST=
# (SID_DESC=
#BEQUEATH CONFIG
# (GLOBAL_DBNAME=salesdb.mycompany)
# (SID_NAME=sid1)
# (ORACLE_HOME=/private/app/oracle/product/8.0.3)
# #PRESPAWN CONFIG
# (PRESPAWN_MAX=20)
# (PRESPAWN_LIST=
# (PRESPAWN_DESC=(PROTOCOL=tcp)(POOL_SIZE=2)(TIMEOUT=1))
# )
# )
# )
# PASSWORDS_<lsnr>
# Specifies a password to authenticate stopping the listener.
# Both encrypted and plain-text values can be set. Encrypted passwords
# can be set and stored using lsnrctl.
# LSNRCTL> change_password
# Will prompt for old and new passwords, and use encryption both
# to match the old password and to set the new one.
# LSNRCTL> set password
# Will prompt for the new password, for authentication with
# the listener. The password must be set before running the next
# command.
# LSNRCTL> save_config
# Will save the changed password to listener.ora. These last two
# steps are not necessary if SAVE_CONFIG_ON_STOP_<lsnr> is ON.
# See below.
#
# Default: NONE
#
# PASSWORDS_LISTENER = 20A22647832FB454 # "foobar"
# SAVE_CONFIG_ON_STOP_<lsnr>
# Tells the listener to save configuration changes to listener.ora when
# it shuts down. Changed parameter values will be written to the file,
# while preserving formatting and comments.
# Default: OFF
# Values: ON/OFF
#
# SAVE_CONFIG_ON_STOP_LISTENER = ON
# USE_PLUG_AND_PLAY_<lsnr>
# Tells the listener to contact an Onames server and register itself
# and its services with Onames.
# Values: ON/OFF
# Default: OFF
#
# USE_PLUG_AND_PLAY_LISTENER = ON
# LOG_FILE_<lsnr>
# Sets the name of the listener's log file. The .log extension
# is added automatically.
# Default=<lsnr>
#
# LOG_FILE_LISTENER = lsnr
# LOG_DIRECTORY_<lsnr>
# Sets the directory for the listener's log file.
# Default: <oracle_home>/network/log
#
# LOG_DIRECTORY_LISTENER = /private/app/oracle/product/8.0.3/network/log
# TRACE_LEVEL_<lsnr>
# Specifies desired tracing level.
# Default: OFF
# Values: OFF/USER/ADMIN/SUPPORT/0-16
#
# TRACE_LEVEL_LISTENER = SUPPORT
# TRACE_FILE_<lsnr>
# Sets the name of the listener's trace file. The .trc extension
# is added automatically.
# Default: <lsnr>
#
# TRACE_FILE_LISTENER = lsnr
# TRACE_DIRECTORY_<lsnr>
# Sets the directory for the listener's trace file.
# Default: <oracle_home>/network/trace
#
# TRACE_DIRECTORY_LISTENER=/private/app/oracle/product/8.0.3/network/trace
# CONNECT_TIMEOUT_<lsnr>
# Sets the number of seconds that the listener waits to get a
# valid database query after it has been started.
# Default: 10
#
# CONNECT_TIMEOUT_LISTENER=10
and my tnsnames.ora
# This file contains the syntax information for
# the entries to be put in any tnsnames.ora file
# The entries in this file are need based.
# There are no defaults for entries in this file
# that Sqlnet/Net3 use that need to be overridden
#
# Typically you could have two tnsnames.ora files
# in the system, one that is set for the entire system
# and is called the system tnsnames.ora file, and a
# second file that is used by each user locally so that
# he can override the definitions dictated by the system
# tnsnames.ora file.
# The entries in tnsnames.ora are an alternative to using
# the names server with the onames adapter.
# They are a collection of aliases for the addresses that
# the listener(s) is(are) listening for a database or
# several databases.
# The following is the general syntax for any entry in
# a tnsnames.ora file. There could be several such entries
# tailored to the user's needs.
<alias>= [ (DESCRIPTION_LIST = # Optional depending on whether u have
# one or more descriptions
# If there is just one description, unnecessary ]
(DESCRIPTION=
[ (SDU=2048) ] # Optional, defaults to 2048
# Can take values between 512 and 32K
[ (ADDRESS_LIST= # Optional depending on whether u have
# one or more addresses
# If there is just one address, unnecessary ]
(ADDRESS=
[ (COMMUNITY=<community_name>) ]
(PROTOCOL=tcp)
(HOST=<hostname>)
(PORT=<portnumber (1521 is a standard port used)>)
)
[ (ADDRESS=
(PROTOCOL=ipc)
(KEY=<ipckey (PNPKEY is a standard key used)>)
)
]
[ (ADDRESS=
[ (COMMUNITY=<community_name>) ]
(PROTOCOL=decnet)
(NODE=<nodename>)
(OBJECT=<objectname>)
)
]
... # More addresses
[ ) ] # Optional depending on whether ADDRESS_LIST is used or not
[ (CONNECT_DATA=
(SID=<oracle_sid>)
[ (GLOBAL_NAME=<global_database_name>) ]
)
]
[ (SOURCE_ROUTE=yes) ]
)
(DESCRIPTION=
[ (SDU=2048) ] # Optional, defaults to 2048
# Can take values between 512 and 32K
[ (ADDRESS_LIST= ] # Optional depending on whether u have more
# than one address or not
# If there is just one address, unnecessary
(ADDRESS
[ (COMMUNITY=<community_name>) ]
(PROTOCOL=tcp)
(HOST=<hostname>)
(PORT=<portnumber (1521 is a standard port used)>)
)
[ (ADDRESS=
(PROTOCOL=ipc)
(KEY=<ipckey (PNPKEY is a standard key used)>)
)
]
... # More addresses
[ ) ] # Optional depending on whether ADDRESS_LIST
# is being used
[ (CONNECT_DATA=
(SID=<oracle_sid>)
[ (GLOBAL_NAME=<global_database_name>) ]
)
]
[ (SOURCE_ROUTE=yes) ]
)
[ (CONNECT_DATA=
(SID=<oracle_sid>)
[ (GLOBAL_NAME=<global_database_name>) ]
)
]
... # More descriptions
[ ) ] # Optional depending on whether DESCRIPTION_LIST is used or not
am sorry for the long post, i just dint want to exclude anything out, is there a config that am missing?