I dont know how to draw shape using UIBezierPath.Anyways i tried with lot of ways but did not successes.
I want to make the below shapes
Please help
func drawSliceInView(view: UIView, startAngle: CGFloat, endAngle: CGFloat, radius: CGFloat)
{
let centerPoint = CGPoint(x: view.frame.size.width / 2, y: view.frame.size.width / 2)
let startValue = (startAngle * 2 * CGFloat(M_PI)) / 360 - CGFloat(M_PI_2)
let endValue = (endAngle * 2 * CGFloat(M_PI)) / 360 - CGFloat(M_PI_2)
let path = UIBezierPath(arcCenter: centerPoint, radius: radius, startAngle: startValue, endAngle: endValue, clockwise: true)
path.addLineToPoint(centerPoint)
path.closePath()
let sliceLayer = CAShapeLayer()
sliceLayer.path = path.CGPath
sliceLayer.fillColor = UIColor.blueColor().CGColor
sliceLayer.backgroundColor = nil
sliceLayer.strokeColor = UIColor.whiteColor().CGColor
sliceLayer.lineWidth = 2.0
view.layer.addSublayer(sliceLayer)
}
Usage example:
drawSliceInView(self.view, startAngle: -30, endAngle: 90, radius: 50)
drawSliceInView(self.view, startAngle: 90, endAngle: 210, radius: 50)
Related
Any suggestion how to implement the following progress chart for iOS Swift?
Just break this down into individual steps.
The first question is how to draw the individual tickmarks.
One way is to draw four strokes using a UIBezierPath:
a clockwise arc at the outer radius;
a line to the inner radius;
a counter-clockwise arc at the inner radius; and
a line back out to the outer radius.
Turns out, you can skip the two lines, and just add those two arcs, and then close the path and you’re done. The UIBezierPath will add the lines between the two arcs for you. E.g.:
let startAngle: CGFloat = 2 * .pi * (CGFloat(i) - 0.2) / CGFloat(tickCount)
let endAngle: CGFloat = 2 * .pi * (CGFloat(i) + 0.2) / CGFloat(tickCount)
// create path for individual tickmark
let path = UIBezierPath()
path.addArc(withCenter: center, radius: outerRadius, startAngle: startAngle, endAngle: endAngle, clockwise: true)
path.addArc(withCenter: center, radius: innerRadius, startAngle: endAngle, endAngle: startAngle, clockwise: false)
path.close()
// use that path in a `CAShapeLayer`
let shapeLayer = CAShapeLayer()
shapeLayer.fillColor = …
shapeLayer.strokeColor = UIColor.clear.cgColor
shapeLayer.path = path.cgPath
// add it to our view’s `layer`
view.layer.addSublayer(shapeLayer)
Repeat this for i between 0 and tickCount, where tickCount is 90, and you have ninety tickmarks:
Obviously, use whatever colors you want, make the ones outside your progress range gray, etc. But hopefully this illustrates the basic idea of how to use UIBezierPath to render two arcs and fill the shape for each respective tick mark with a specified color.
E.g.
class CircularTickView: UIView {
var progress: CGFloat = 0.7 { didSet { setNeedsLayout() } }
private var shapeLayers: [CAShapeLayer] = []
private let startHue: CGFloat = 0.33
private let endHue: CGFloat = 0.66
override func layoutSubviews() {
super.layoutSubviews()
shapeLayers.forEach { $0.removeFromSuperlayer() }
shapeLayers = []
let outerRadius = min(bounds.width, bounds.height) / 2
let innerRadius = outerRadius * 0.7
let center = CGPoint(x: bounds.midX, y: bounds.midY)
let tickCount = 90
for i in 0 ..< tickCount {
let shapeLayer = CAShapeLayer()
shapeLayer.fillColor = color(percent: CGFloat(i) / CGFloat(tickCount)).cgColor
shapeLayer.strokeColor = UIColor.clear.cgColor
let startAngle: CGFloat = 2 * .pi * (CGFloat(i) - 0.2) / CGFloat(tickCount)
let endAngle: CGFloat = 2 * .pi * (CGFloat(i) + 0.2) / CGFloat(tickCount)
let path = UIBezierPath()
path.addArc(withCenter: center, radius: outerRadius, startAngle: startAngle, endAngle: endAngle, clockwise: true)
path.addArc(withCenter: center, radius: innerRadius, startAngle: endAngle, endAngle: startAngle, clockwise: false)
path.close()
shapeLayer.path = path.cgPath
layer.addSublayer(shapeLayer)
shapeLayers.append(shapeLayer)
}
}
private func color(percent: CGFloat) -> UIColor {
if percent > progress {
return .lightGray
}
let hue = (endHue - startHue) * percent + startHue
return UIColor(hue: hue, saturation: 1, brightness: 1, alpha: 1)
}
}
Clearly, you will want to tweak as you see fit. Perhaps change the color algorithm. Perhaps have it start from 12 o’clock rather than 3 o’clock. Etc. The details are less important than groking the basic idea of how you add shape layers with paths to your UI.
I want to create an inner shadow for an arc but I get half of a circle instead of the shadow (see image below).
My code is:
let rect = self.bounds
let segmentArcPath = UIBezierPath()
segmentArcPath.addArc(withCenter: rect.center,
radius: (rect.height - insetShadow) / 2,
startAngle: -.pi/2,
endAngle: value * 2 * .pi - .pi/2,
clockwise: true)
shadowPath = segmentArcPath.cgPath
I have tried to add two paths (to not close the shadow), but without success:
let rect = self.bounds
let segmentArcPath = UIBezierPath()
segmentArcPath.addArc(withCenter: rect.center,
radius: (rect.height - insetShadow) / 2,
startAngle: internalStrokeStart,
endAngle: internalStrokeEnd,
clockwise: true)
let segmentArcPath2 = UIBezierPath()
segmentArcPath2.addArc(withCenter: rect.center,
radius: (rect.height - insetShadow) / 2 - 5,
startAngle: internalStrokeStart,
endAngle: internalStrokeEnd,
clockwise: false)
segmentArcPath.append(segmentArcPath2)
shadowPath = segmentArcPath.cgPath
How can I create a shadow as shown in the image above? Do you have any hints?
As recommended by #vacawama:
Only create one UIBezierPath. After drawng the outer arc, draw a 5
unit line towards the center of the arc, then call addArc to add the
inner arc to the same path
let rect = self.bounds
let outerRadius = (rect.height - insetShadow) / 2
let segmentArcPath = UIBezierPath()
segmentArcPath.addArc(withCenter: rect.center,
radius: outerRadius,
startAngle: internalStrokeStart,
endAngle: internalStrokeEnd,
clockwise: true)
let innerCircleRadius = outerRadius - 2
let startPointXInnerCircle = cos(internalStrokeEnd) * innerCircleRadius + rect.center.x
let startPointYInnerCircle = sin(internalStrokeEnd) * innerCircleRadius + rect.center.y
segmentArcPath.addLine(to: CGPoint(x: startPointXInnerCircle, y: startPointYInnerCircle))
segmentArcPath.addArc(withCenter: rect.center,
radius: innerCircleRadius,
startAngle: internalStrokeEnd,
endAngle: internalStrokeStart,
clockwise: false)
shadowPath = segmentArcPath.cgPath
I'am trying draw a circular crown with UIBezierPath. I can draw two circle with two diferent radius:
let bezierCrown = UIBezierPath()
bezierCrown.addArc(withCenter: center,
radius: raidus1,
startAngle: 0,
endAngle: CGFloat.pi*2,
clockwise: true)
bezierCrown.move(to: CGPoint(x: center.x+distancia2, y: center.y))
bezierCrown.addArc(withCenter: center,
radius: raidus2,
startAngle: 0,
endAngle: CGFloat.pi*2,
clockwise: true)
But when I fill:
UIColor.green.setFill()
bezierCrown.fill()
Everything is filled: image.
I want only the crown to be filled.
You need to set the fillRule to evenOdd
let center = CGPoint(x: 200, y: 400)
let raidus1:CGFloat = 100
let raidus2:CGFloat = 80
let bezierCrown = UIBezierPath()
bezierCrown.addArc(withCenter: center,
radius: raidus1,
startAngle: 0,
endAngle: CGFloat.pi*2,
clockwise: true)
bezierCrown.move(to: CGPoint(x: center.x+raidus2, y: center.y))
bezierCrown.addArc(withCenter: center,
radius: raidus2,
startAngle: 0,
endAngle: CGFloat.pi*2,
clockwise: true)
let shapeLayer = CAShapeLayer()
shapeLayer.path = bezierCrown.cgPath
shapeLayer.fillColor = UIColor.blue.cgColor
shapeLayer.strokeColor = UIColor.red.cgColor
shapeLayer.fillRule = .evenOdd
view.layer.addSublayer(shapeLayer)
I want to crop UIView in semi circle shape
Thanks in advance.
A convenient way is just subclass a UIView, add a layer on it and make the view color transparent if it's not by default.
import UIKit
class SemiCirleView: UIView {
var semiCirleLayer: CAShapeLayer!
override func layoutSubviews() {
super.layoutSubviews()
if semiCirleLayer == nil {
let arcCenter = CGPoint(x: bounds.size.width / 2, y: bounds.size.height / 2)
let circleRadius = bounds.size.width / 2
let circlePath = UIBezierPath(arcCenter: arcCenter, radius: circleRadius, startAngle: CGFloat.pi, endAngle: CGFloat.pi * 2, clockwise: true)
semiCirleLayer = CAShapeLayer()
semiCirleLayer.path = circlePath.cgPath
semiCirleLayer.fillColor = UIColor.red.cgColor
layer.addSublayer(semiCirleLayer)
// Make the view color transparent
backgroundColor = UIColor.clear
}
}
}
This question was already answered here: Draw a semi-circle button iOS
This is a extract of that question but using a UIView:
Swift 3
let myView = [this should be your view]
let circlePath = UIBezierPath(arcCenter: CGPoint(x: myView.bounds.size.width / 2, y: 0), radius: myView.bounds.size.height, startAngle: 0.0, endAngle: CGFloat(M_PI), clockwise: true)
let circleShape = CAShapeLayer()
circleShape.path = circlePath.cgPath
myView.layer.mask = circleShape
Swift 4
let myView = [this should be your view]
let circlePath = UIBezierPath(arcCenter: CGPoint(x: myView.bounds.size.width / 2, y: 0), radius: myView.bounds.size.height, startAngle: 0.0, endAngle: .pi, clockwise: true)
let circleShape = CAShapeLayer()
circleShape.path = circlePath.cgPath
myView.layer.mask = circleShape
I hope this helps you
it works in swift 4 and swift 5 for this issue.
let yourView = (is the view you want to crop semi circle from top)
let circlePath = UIBezierPath(arcCenter: CGPoint(x: yourView.bounds.size.width / 2, y: yourView.bounds.size.height), radius: yourView.bounds.size.height, startAngle: 0.0, endAngle: .pi, clockwise: false)
let circleShape = CAShapeLayer()
circleShape.path = circlePath.cgPath
yourView.layer.mask = circleShape
I would like to create an arc with Swift and SpriteKit by doing something like this:
func createArc(endAngle: CGFloat) -> SKShapeNode {
let bezierPath = UIBezierPath(arcCenter: CGPointMake(0, 0), radius: 300, startAngle: CGFloat(M_PI_2), endAngle: endAngle, clockwise: false)
let pathNode = SKShapeNode(path: bezierPath.CGPath)
pathNode.strokeColor = SKColor.blackColor()
pathNode.lineWidth = 50
pathNode.position = CGPoint(x: size.width/2, y: size.height/2)
pathNode.antialiased = true
return pathNode
}
But how should I change the endAngle value of the UIBezierPath programmatically say in the update() function?