There are some kind of buffers in Emacs, that are readonly and thay can be closed on q key.
For example, search functionality in projectile (C-c p s g) opens search results buffer which can be closed just pressing q key.
What name of this kind of buffers in Emacs terminology and how to manage them programmatically?
In general, read-only buffers which can be closed with q are likely to have the major mode special-mode, or some derivative thereof.
See C-hig (elisp) Basic Major Modes RET
This kind of buffers in temporary buffer.
You can put your output to temporary buffer using with-output-to-temp-buffer function
A good article about this - Emacs: Capture Shell Command Output in Temporary Buffer
The question is unclear. Temporary buffers do not necessarily bind q to quit or anything similar. Keybindings of temporary buffers are not necessarily similar at all. Look at *Messages* and *scratch*, for example.
There is no single definition of "temporary" buffer in Emacs. That term just means (roughly) any buffer that a user is not likely to save or want to save. In general, any non-file buffer could be thought of as temporary.
Buffers for which q performs some sort of quit operation are not necessarily temporary either, but they often are (not expected to be saved). You can save any buffer using C-x C-w - a *Help* buffer, for instance. And even when q quits the window or buffer in some sense, the exact behavior can be quite different from one buffer to another.
Finally, user settings can affect what things like q (quit) operations do. And they can depend on the particular buffer as well.
In short, the question is not specific enough to draw a helpful answer. But perhaps some of the above can help a general understanding. My suggestion is to pose another, very specific question.
Related
I have recently started using Emacs follow-mode to see more of documents I am working on. Unfortunately, it seems to have some limitations, at least as I am using it. I very often use C-x b RET to toggle between two buffers, but this doesn't work as I would expect with follow-mode. I would expect that if both buffers are set up to use follow-mode, it should switch both windows, but it does not. Also, even if only one buffer is set to use follow-mode, hitting C-x b RET after switching to that buffer should get me back to my original configuration, but instead it switches the active window to some third buffer. Can anyone explain some better follow-mode idioms or else an alternative to follow-mode?
I get this warning in my matlab-shell buffer when I print alot to stdout:
Warning (undo): Buffer `*MATLAB*' undo info was 12268000 bytes long.
The undo info was discarded because it exceeded `undo-outer-limit'.
This is normal if you executed a command that made a huge change
to the buffer. In that case, to prevent similar problems in the
future, set `undo-outer-limit' to a value that is large enough to
cover the maximum size of normal changes you expect a single
command to make, but not so large that it might exceed the
maximum memory allotted to Emacs.
My emacs looks like this:
I really don't need any undo in the matlab-shell which is the right buffer. Is there a way to disable this warning? Note that the left buffer is a MATLAB script which means that the major mode is MATLAB, and certainly undo should not be disabled there.
As that warning message says (or used to say?):
You can disable the popping up of this buffer by adding the entry
(undo discard-info) to the user option warning-suppress-types,
which is defined in the warnings library.
That is:
(add-to-list 'warning-suppress-types '(undo discard-info))
(That will of course just disable the warning, not the undo data collection itself.)
Your question is a little ambiguous, but assuming you're saying that you have no need to undo things in this buffer, then you can disable the undo system on a per-buffer basis:
buffer-disable-undo is an interactive compiled Lisp function in `simple.el'.
(buffer-disable-undo &optional BUFFER)
Make BUFFER stop keeping undo information.
No argument or nil as argument means do this for the current buffer.
So you can call M-x buffer-disable-undo RET interactively, or if you're sure about it, you could add this to a hook function for the mode in question.
Edit:
So based on the extra information in the question comments, I would suggest this:
(add-hook 'matlab-shell-mode-hook 'buffer-disable-undo)
I was wondering how people manage with the useless messages etc emacs buffers generated randomly, for example after my completions, I get an completions buffer and it upsets me it create a buffer I have to traverse to get to the next buffer. Anyone have a solution to this?
The title is rather vague. There are lots of Q&As on the general subject of "buffer management" in Emacs. Here's one which includes links to several others (see "Linked" in the right-hand sidebar):
How can I more easily switch between buffers in Emacs?
For your specific question, I suggest using the excellent winner-mode. Just add (winner-mode 1) to your .emacs file (or type M-x winner-mode RET to try it out).
Once enabled, you can call winner-undo with C-c<left> (repeatedly, if necessary) to step backwards through all the previous window configurations.
Thus, when a window pops up and you no longer want it, you type C-c<left> and you're immediately back to how things were before.
C-c<right> calls winner-redo which restores the configuration you started with (i.e. it doesn't step through the configurations like the undo command).
Also note that many types of buffer can be buried with q or deleted with z.
I have a number of splits open, looking at various buffers. But when I for example check the help on a function it will replace one of the splits with the help buffer. Once I'm done reading the help I have to go back to the correct buffer manually which is a pain. How do I get Emacs to be nicer to my buffers?
Update: Help will let you press q to go back to the previous buffer. But causing the Emacs backtrace to pop up also steals one of my buffer windows and it doesn't have a q.
Update: Backtrace DOES have q to go back. My original question still remains: how do I ask Emacs not to steal one of my splits?
Adding the line(push "*Help*" special-display-buffer-names) to the init file should make subsequent invocations of the help buffer to appear in its own frame(what the desktop usually calls "window"), and leave the original frame with its configuration alone.
See Special Buffer Frames.
You could also use winner-mode. It came up on planet.emacsen.org a while back.
Winner Mode is a global minor mode. When activated, it allows to “undo” (and “redo”) changes in the window configuration with the key commands ‘C-c left’ and ‘C-c right’.
That way you can undo any changes to your splits immediately after they happen.
I hope this will help you :
C-x 0 to remove the current window
C-x 1 to keep only the current window
you can use windmove by adding the following line in your .emacs :
(windmove-default-keybindings)
Then, you can move the point between windows using S-right S-left S-up and S-down
There are lots of ways to store and restore emacs windows, see emacswiki.org on the subject.
What I do is just go to that changed buffer, C-x k it, and the current buffer in that window will be the previous buffer.
It may be possible to define advice for the help that saves the current window and buffer state and restores it with a simple keybind. But this is outside my basic elisp knowledge.
I've been using emacs for all of my text editing needs for the past three years now. When I'm in a single file, working on code or whatnot, I'm fairly efficient. With two files, I can "C-x b RET" between them and I do fine. However, whenever I need to be working on more than two files at a time, I tend to get lost.
Here are some of the problems that I'd like to work on:
I forget what some of my buffers are called, but I don't understand why C-x C-b splits my window into two buffers and exits the mini buffer. Sure I can switch buffers and choose a buffer to visit, but this feels unintuitive, and leaves me with two buffers open.
When I visit a directory rather than a file, I have a convenient list of all of the files and directories. I usually want to do one of two things with this: 1) Open a single file and never see this buffer again OR 2) Open a bunch of files and never see this buffer again. I don't really know how to do this, as moving the point to a file and hitting return doesn't do either of these things.
I know that my buffers aren't like tabs, but I have an inclination to want to scroll through them to find what I want. I don't know of any key-bindings for this, but I'd like it to be M-n / M-p or the like. Then again, this may be a horribly inefficient way to switch buffers.
When I open interactive help of any kind (for example in ESS), I have a habit of switching back to the buffer I was working in and using C-x 1 to get back to a single buffer. When I do this, however, the help buffer hangs around in my buffer list, further confusing me. I know I can switch to that buffer, kill it, switch back, and then go back to a single buffer, but this seems wrong.
The way I've dealt with this so far involves using a tiling window manager and a few emacs windows in different work-spaces, rather than actually learn the best way to manage a number of files in emacs. I don't necessarily want to change emacs to better fit my needs (although I am open to that if it fits in with what I'm about to say), instead, I'd like to grok the thought process behind handling files/buffers the way that emacs does, and how I can be more efficient with it.
Any answer that would help me understand the correct way, or a more efficient way to manage my buffers or files would be greatly appreciated.
Bind C-x C-b to ibuffer. This is a better buffer listing facility with many advanced features, and its default behaviour is to replace the current buffer with the buffer listing, and then bury the listing when you select a buffer (leaving you with the newly-selected buffer in place of the original one).
You can simply use C-x b to enter your selection in the mini-buffer, of course; however the tab-completion (which is needed to make this a viable option, IMO) does open a new window temporarily, at which point I think you might as well familiarise yourself with something with more features.
Use a instead of RET when selecting from dired. This kills the dired buffer instead of leaving it behind. C-h m in any buffer will show you the help for its major mode (followed by help for the minor modes), and you can read about all the available dired key bindings there.
http://www.emacswiki.org/cgi-bin/wiki/TabBarMode ? (edit: I prefer Rémi's answer for this one, but TabBarMode would give you the visual tab element if you were particularly keen on that.)
q is bound to a 'quit' function in a great many major modes. Generally it buries the buffer rather than killing it, but I certainly find that fine.
To elaborate a little on #1, ibuffer has lots of nice features, and M-x customize-group ibuffer RET will give you some idea of how you can customise it to your liking.
Furthermore, you can filter the buffer list by many criteria (again, use C-h m to see its help page), and then generate a 'group' definition from the current filters, and save your custom filters and groups for future usage.
For example:
/ f ^/var/www/ RET: filter buffer list to show only filenames starting with /var/www/.
/ s Web filters RET: name and save active filter set to your init file.
/ g Web development RET: create a named group from the active filters.
/ S My groups RET: name and save group definitions to your init file.
/ r Web filters RET: invoke the "Web filters" filters.
/ R My groups RET: invoke the "My groups" groups.
RET on a group name to collapse or expand it.
C-k and C-y to kill and yank groups, to re-arrange them.
C-h m for more information...
This way you can have a single Emacs instance running, and create filters and groups for different types of task, and easily switch between them.
I think you will really enjoy Ido for dealing with multiple buffers who's names you can't exactly remember. When you type C-x b it shows a list of open buffers in most used order. As you type some of the characters in a buffer name the list is filtered. The characters you type don't have to be at the begging of the name or contiguous. Using C-f, C-b or left/right arrow keys cycles through the buffer choices.
Also see Smex for Ido like functionality for M-x
Closing windows is done with C-x 0. Intentionally splitting the window is done with C-x 2 for horizontal, C-x 3 for vertical. I love this feature, since it allows me to have test and production code visible at the same time. C-x o takes me to the other window.
I use C-x right (or C-x C-right) and C-x left (or C-x C-right) to go to the next and previous buffer. I don't mind anymore off the few buffer that lay around in Emacs but you could use k in the buffer list to kill the buffer you don't use anymore.
You can also try Iswitchb mode which provides auto-completion for buffer names when you switch buffers via C-x b.
To activate:
M-x iswitchb-mode
Or add to your .emacs file:
(iswitchb-mode)
It is similar to Ido mode for buffer switching but a bit more lightweight.
Also, if you want a more customizable listing of your buffers then use M-x bs-show as an alternative to C-x C-b. In that buffer type ? to get a list of actions you can perform.
I think the number one most useful extension for flipping through buffers is Anything. It lets you start typing part of a buffer (or file!) name and it will figure out what you want. I've rebound C-x b to anything-for-buffers. It makes life so much better.
As always, there are many ways to help you with this; it depends a bit on personal preference what works best, here are some links with explanations:
ibuffer; which is an updated buffer menu (C-x C-b)
ido, which let's you have more powerful autocompletion to switch through buffers. It's a kind-of 'better iswitchb'.
These two are enough for me; but you may also be interested in the tabbar-mode, which gives you rudimentary tabs (like firefox has them).