I've written a simple function that takes a vector vec, iterates through it, performing an operation whose result is stored in another vector vecRes of same size at same index, and returns vecRes upon completing the loop. Below is function code:
function [ vecRes ] = squareTerms( vec )
vecSize = size(vec);
vecRes = zeros(vecSize);
for i = 1:vecSize
vecRes(i) = vec(i)^2;
end
end
Problem is that it seems to exit too early, after only one iteration in fact as the output appears as:
vecRes = 1 0 0 0 0 0 0 0 0 0
For input:
vec = 1 2 3 4 5 6 7 8 9 10
I can't figure out why it does so. Any help is greatly appreciated.
Size returns 2 values, rows and columns. Probably you are a having a 1xN vector. So size returns [1 N] and your loop runs 1 time.
>>> size ([1 2 3])
>
> ans =
>
> 1 3
>
>>> 1:size ([1 2 3])
>
> ans =
>
> 1
Others have pointed out the problem. My preferred solution in this sort of case is to use numel, i.e.
vecRes = zeros(size(vec));
for i = 1:numel(vec)
vecRes(i) = vec(i) ^ 2;
end
Of course, in this case, vectorisation is better still:
vecRes = vec .^ 2;
Replace
for i = 1:vecSize
with
for i = 1:vecSize(2)
vecSize is an array of numbers, not just a single value. For example, if vec is a 1 by 8 vector, then size(vec) will return [1, 8].
Therefore, your for-loop-statement,
for i = 1:vecSize
, is actually equivalent to something like:
for i = 1:[1, 8]
This doesn't make much sense. There are a number of ways to fix the problem. You could write:
for i = 1:length(vec)
or
for i = 1:numel(vec) % "numel" stands for "number of elements"
If the vector is 1xn instead of nx1, you can write:
for i = 1:size(vec, 2)
Yet another alternative is:
for i = 1:max(vecSize)
However, the most sensible option is not to write the squareTerms function at all and simply write
vecRes = vec.^2;
Note the dot before the caret. vec^2 and vec . ^2 are not the same thing.
If you put a dot before an operator sign, the operation will be performed element-wise. For example,
C = A * B
performs matrix multiplication, but
C = A .* B
will cause the first element of A to by multiplied by the first element of B, and the result will be assigned to the first element of C. Then, the product of the second elements of A and B will be taken, and the result will be stuck in the second element of C, and so on.
vecRes = vec.^2;
Related
I would like your help to make more efficient (maybe, by vectorising) the Matlab code below. The code below does essentially the following: take a row vector A; consider the maximum elements of such a row vector and let, for example, be i and j their positions; construct two columns vectors, the first with all zeros but a 1 positioned at i, the second with all zeros but a 1 positioned at j.
This is my attempt with loops, but it looks more complicated than needed.
clear
rng default
A=[3 2 3];
max_idx=ismember(A,max(A));
vertex=cell(size(A,2),1);
for j=1:size(max_idx,2)
if max_idx(j)>0
position=find(max_idx(j));
vertex_temp=zeros(size(A,2),1);
vertex_temp(position)=1;
vertex{j}=vertex_temp;
else
vertex{j}=[];
end
end
vertex=vertex(~cellfun('isempty',vertex));
Still using a for loop, but more readable:
A = [3 2 3];
% find max indices
max_idx = find(A == max(A));
vertex = cell(numel(max_idx),1);
for k = 1:numel(max_idx)
vertex{k} = zeros(size(A,2),1); % init zeros
vertex{k}(max_idx(k)) = 1; % set value in vector to 1
end
If you really wanted to avoid a for loop, you could probably also use something like this:
A=[3 2 3];
max_idx = find(A==max(A));
outMat = zeros(numel(A), numel(max_idx));
outMat((0:(numel(max_idx)-1)) * numel(A) + max_idx) = 1;
then optionally, if you want them in separate cells rather than columns of a matrix:
outCell = mat2cell(outMat, numel(A), ones(1,numel(max_idx)))';
However, I think this might be less simple and readable than the existing answers.
Is there a specific reason you want a cell array rather than a matrix?
If you can have it all in one vector:
A = [3 2 3]
B_rowvec = A == max(A)
B_colvec = B_rowvec'
If you need them separated into separate vectors:
A = [3 2 3]
Nmaxval = sum(A==max(A))
outmat = zeros(length(A),Nmaxval)
for i = 1:Nmaxval
outmat(find(A==max(A),i),i)=1;
end
outvec1 = outmat(:,1)
outvec2 = outmat(:,2)
Basically, the second input for find will specify which satisfactory instance of the first input you want.
so therefore
example = [ 1 2 3 1 2 3 1 2 3 ]
first = find(example == 1, 1) % returns 1
second = find(example == 1, 2) % returns 4
third = find(example == 1, 3) % returns 7
I have a 1x24 vector (a). I should define a command in Matlab which compare all 24 values of a vector (a) with a certain value (mean (b)) and if the vector (a) item is greater than certain value (mean (b)), ''I'' sets 1 and if the vector item is less than certain value ''I'' sets 0. I wrote the below code:
for i=1:length(a)
if a(i) >= mean(b)
I = 1;
else
I = 0;
end
end
But it implements the comparison only for the last index of vector a and sets I=0. How can I fix the command that do the comparison for all indexes of vector a?
In MATLAB, you can use the following syntax to do so:
I = a >= mean(b);
If you want to use your code for doing so, you'll need to initialize I as a vector, and modify its indices as follows:
I = zeros(length(a),1)
for ii=1:length(a)
if a(ii) >= mean(b)
I(ii) = 1;
else
I(ii) = 0;
end
end
You should read about logical indexing in matlab. You don't need for loops for what you are doing. For example, if you have,
rng(5);
a = rand(1,10);
b = 0.5;
then, I = a > b; will return a logical array with zeros and ones, where one indicates the position in the array where the given condition is satisfied,
I =
0 1 0 1 0 1 1 1 0 0
Using these indices, you can modify your original array. For example, if you wish to change all values of a greater than b to be 10, you would simply do,
a(a > b) = 10;
Specifically, if you need indices where the condition is satisfied, you can use, find(a > b), which in this example will give you,
ans =
2 4 6 7 8
I am looking for a functionality i Matlab to subset and array like the IN function in SQL or %in% in R. I.e. I have the following data:
a = 1:3;
b = 2:4;
Then I want to write something like:
(a %in% b)
And it should produce:
ans =
0 1 1
However using %in% clearly doesn't work.
You are probably looking for the function ismember, which checks which members of one matrix are also member of a second matrix. It returns true/false for each entry in your matrix a if it can/cannot be found in your matrix b.
ismember(a, b)
ans =
0 1 1
As a side note: % is the character, which starts a comment.
You could also do it with bsxfun:
result = sum(bsxfun(#eq, a(:).', b(:)), 1);
This has the advantage that it tells you how many elements of b equal each element of a. For example,
>> a = [1 2 3];
>> b = [2 3 4 2];
>> result = sum(bsxfun(#eq, a(:).', b(:)),1)
result =
0 2 1
Given a vector
A = [1,2,3,...,100]
I want to extract all elements, except every n-th. So, for n=5, my output should be
B = [1,2,3,4,6,7,8,9,11,...]
I know that you can access every n-th element by
A(5:5:end)
but I need something like the inverse command.
If this doesn't exist I would iterate over the elements and skip every n-th entry, but that would be the dirty way.
You can eliminate elements like this:
A = 1:100;
removalList = 1:5:100;
A(removalList) = [];
Use a mask. Let's say you have
A = 1 : 100;
Then
m = mod(0 : length(A) - 1, 5);
will be a vector of the same length as A containing the repeated sequence 0 1 2 3 4.
You want everything from A except the elements where m == 4, i.e.
B = A(m ~= 4);
will result in
B == [1 2 3 4 6 7 8 9 11 12 13 14 16 ...]
Or you can use logical indexing:
n = 5; % remove the fifth
idx = logical(zeroes(size(A))); % creates a blank mask
idx(n) = 1; % makes the nth element 1
A(idx) = []; % ta-da!
About the "inversion" command you cited, it is possible to achieve that behavior using logical indexing. You can negate the vector to transform every 1 in 0, and vice-versa.
So, this code will remove any BUT the fifth element:
negatedIdx = ~idx;
A(negatedIdx) = [];
why not use it like this?
say A is your vector
A = 1:100
n = 5
B = A([1:n-1,n+1:end])
then
B=[1 2 3 4 6 7 8 9 10 ...]
One possible solution for your problem is the function setdiff().
In your specific case, the solution would be:
lenA = length(A);
index = setdiff(1:lenA,n:n:lenA);
B = A(index)
If you do it all at once, you can avoid both extra variables:
B = A( setdiff(1:end,n:n:end) )
However, Logical Indexing is a faster option, as tested:
lenA = length(A);
index = true(1, lenA);
index(n:n:lenA) = false;
B = A(index)
All these codes assume that you have specified the variable n, and can adapt to a different value.
For the shortest amount of code, you were nearly there all ready. If you want to adjust your existing array use:
A(n:n:end)=[];
Or if you want a new array called B:
B=A;
B(n:n:end)=[];
This is half a question and half a challenge to the matlab gurus out there:
I'd like to have a function take in a logical array (false/true) and give the beginning and ending of all the contiguous regions containing trues, in a struct array.
Something like this:
b = getBounds([1 0 0 1 1 1 0 0 0 1 1 0 0])
should return
b = 3x1 struct array with fields:
beg
end
and
>> b(2)
ans =
beg: 4
end: 6
I already have an implementation, but I don't really know how to deal with struct arrays well so I wanted to ask how you would do it - I have to go through mat2cell and deal, and when I have to deal with much larger struct arrays it becomes cumbersome. Mine looks like this:
df = diff([0 foo 0]);
a = find(df==1); l = numel(a);
a = mat2cell(a',ones(1,l))
[s(1:l).beg] = deal(a{:});
b = (find(df==-1)-1);
b = mat2cell(b',ones(1,l))
[s(1:l).end] = deal(b{:});
I don't see why you are using mat2cell, etc. You are making too much of the problem.
Given a boolean row vector V, find the beginning and end points of all groups of ones in the sequence.
V = [1 0 0 1 1 1 0 0 0 1 1 0 0];
You get most of it from diff. Thus
D = diff(V);
b.beg = 1 + find(D == 1);
This locates the beginning points of all groups of ones, EXCEPT for possibly the first group. So add a simple test.
if V(1)
b.beg = [1,b.beg];
end
Likewise, every group of ones must end before another begins. So just find the end points, again worrying about the last group if it will be missed.
b.end = find(D == -1);
if V(end)
b.end(end+1) = numel(V);
end
The result is as we expect.
b
b =
beg: [1 4 10]
end: [1 6 11]
In fact though, we can do all of this even more easily. A simple solution is to always append a zero to the beginning and end of V, before we do the diff. See how this works.
D = diff([0,V,0]);
b.beg = find(D == 1);
b.end = find(D == -1) - 1;
Again, the result is as expected.
b
b =
beg: [1 4 10]
end: [1 6 11]
By the way, I might avoid the use of end here, even as a structure field name. It is a bad habit to get into, using matlab keywords as variable names, even if they are only field names.
This is what I went with:
df = diff([0 foo 0]);
s = struct('on',num2cell(find(df==1)), ...
'off',num2cell(find(df==-1)-1));
I forgot about num2cell and the nice behavior of struct with cell arrays.