As title say, it is possible to issue a query on psql with a "begin", query, and "commit".
What I want to know is what happens if I don't use a "begin" command?
Some database engine will allow you to execute modifications (INSERT, UPDATE, DELETE) without an open transaction. It's basically assumed that you have an instant BEGIN / COMMIT around each of your instructions, which is a bad practice in case something goes wrong in a batch of many instructions.
You can still make a SELECT, but no INSERT, UPDATE, DELETE without a BEGIN to enforces the good practice. That way, if something goes wrong, a ROLLBACK is instantly executed, canceling all your modifications as if they never existed.
Using a transaction around a batch of various SELECT will guarantee that the data you get for each SELECT matches the same version of the database at the instant you open the transaction depending on your ISOLATION level.
Please read this for more information :
http://www.postgresql.org/docs/9.5/static/sql-start-transaction.html
and
http://www.postgresql.org/docs/9.5/static/tutorial-transactions.html
If you don't use BEGIN/COMMIT, it's the same as wrapping each individual query in a BEGIN/COMMIT block. You can use BEGIN/COMMIT to group multiple queries into a single transaction. A few reasons you might want to do so include
Updating multiple tables at the same time. For instance, usually when you delete a record you also want to delete other rows that reference it. If you do this in the same transaction, nothing will ever be able to reference a row that's already been deleted.
You want to be able to revert some changes if something goes wrong later. Suppose you're writing some user inputted data to multiple tables. At some point you realize that some of it isn't formatted properly. You probably wouldn't want to insert any of it, so you should wrap the entire operation in a transaction.
If you want to ensure the data you're updating hasn't been updated while you're writing to it. Suppose I'm adding $10 to a bank account from two separate connections. I want to add $20 in total - I don't want one of the UPDATEs to clobber the other.
Postgres gives you the first two of these by default. The last one would require a higher transaction isolation level, and makes your query run the risk of raising a serialization error. Transaction isolation levels are a fairly complicated topic, so if you want more info on them the best place to go is the documentation.
Related
In fact, the PostgreSQL documentation states that all interactions with the database are performed within a transaction.
PostgreSQL actually treats every SQL statement as being executed within a transaction. If you do not issue a BEGIN command, then each individual statement has an implicit BEGIN and (if successful) COMMIT wrapped around it. A group of statements surrounded by BEGIN and COMMIT is sometimes called a transaction block.
Given this, even something like SELECT name FROM users will initiate a COMMIT. Is there a way to avoid this? In other words—is there a means of looking at the data in a table without issuing a COMMIT or a ROLLBACK? In the case of statements whose sole purpose is to fetch some data, it seems like superfluous overhead.
I read this and recognize that having SELECT statements be within a transaction is important; it allows one to take a snapshot of the data and thus remain consistent about what rows are where and what data they contain—but, then, is there a way to end a transaction without the overhead of COMMIT or ROLLBACK (in the case where neither is actually necessary)?
I recognize that having SELECT statements be within a transaction is important; it allows one to take a snapshot of the data and thus remain consistent
Good.
but, then, is there a way to end a transaction without the overhead of COMMIT or ROLLBACK?
Committing a transaction that did only read data does not have any overhead. All you need to do is drop the transaction handle and the resources allocated for it.
The "implicit COMMIT" just means that the transaction is getting closed/exited/completed - with or without actually writing anything. You cannot have the transaction without ending it.
I work with a software that is used by a lot of different clients in several countries, with different needs, rules and constraints on their data.
When I make a change to the database's structure, I have a tool to test it on every client's database, obviously with read-only rights. This means that the best way to test a query like UPDATE table SET x = y WHERE condition
is to call the "read-only part" SELECT x FROM table WHERE condition.
It works but it's not ideal, as sometimes it is writing data that causes problems (mostly deadlocks or timeouts), meaning I can't see the problem until a client suffers from it.
I'm wondering if there is a way to grant write permissions in Postgres, but only when inside a transaction, and force a rollback on every transaction. This way, changes could be tested accurately on real data and still prevent any dev from editing it.
Any ideas?
Edit: the volumes are too large to consider cloning data for every dev who needs to run a query
This sounds similar to creating an audit table to record information about transactions. I would consider using a trigger to write a copy of the data to a "rollback" table/row and then copy the "rollback" table/row back on completion of the update.
I have a simple bug in my program that uses multi user support. I'm using knex to build sql queries, and I have a pseudocode that depicts the scenerio:
const value = queryBuilder().readDataFromTheDatabase();//executes this
//do some other work and get value
queryBuilder.writeValueToTheDatabase(updateValue(value));
This piece of code is being use in sort of a middleware function. And as you can see, this is a possible race condition i.e. when multiple users access the thing, one of them gets a stale value when they try to execute this at roughly the same amount of time.
My solution
So, I was think a possible solution would be create a single queryBuilder statement:
queryBuilder().readAndUpdateValueInTheDatabase();
So, I'll probably have to use a little bit of plpgsql. I was wondering if this solution will be sufficient. Will the statement be executed atomically? i.e. When one request reads and doesn't finish his write, does another request wait around to both read and write or just waits to write but, reads the stale value?
I think what you are looking for here is isolation, not atomicity. You could set all transactions to the highest isolation level, serializable (which is higher than the usual default level). With that level, if data that a transaction read (and presumably relied upon) is changed, then when it tries to commit it might get a serialization failure error. I say "might", because the system could conclude the situation would be consistent with the data change having happened after the commit, in which case the commit is allowed to stand.
To avoid a race condition with such a setup, you must run both the read and the write in the same database transaction.
There are two ways to do that:
Use the default READ COMMITTED isolation level and lock the rows when you read them:
SELECT ... FROM ... FOR NO KEY UPDATE;
That locks the rows against concurrent modifications, and the lock is held until the end of the transaction.
Use the REPEATABLE READ isolation level and don't lock anything. Then your UPDATE will receive a serialization error (SQLSTATE 40001) if somebody modified the row concurrently. In that case, you roll the transaction back and try again in a new REPEATABLE READ transaction.
The first solution is usually better if you expect conflicts frequently, while the second is better if conflicts are rare.
Note that you should keep the database transaction as short as possible in both cases to keep the risk of conflicts low.
Transaction in PostgreSQL use an optimistic locking model when accessing to tables, while some other DBMS do pessimistic locking (IBM Db2) or the two locking model (MS SQL Server).
Optimistic locking snapshot the data on which you are working, and the modifications are done on the snapshot until the transaction ended. When the transaction finishes, the snapshot modifications are postponed on the real database (table rows), but if some other user had made a change between the moment of the snapshot capture and the commit, then the commit cannot apply and the COMMIT is rejected as a ROLLBACK.
You can try to raise the ISOLATION LEVEL (REPEATABLE READ or SERIALIZABLE) to avoid the trouble.
I am using transactions to make changes to a SQL database. As I understand it, this means that changes to the database will happen in an all-or-nothing fashion. What I want to know is, does this have any guarantees for reads? For example, suppose I have some (pseudo)-code like this:
1) start TRANSACTION
2) INSERT INTO users ... // insert some data
3) count = SELECT COUNT(*) FROM ... // count something in the database
4) if count > 10: // do something based on the read
5) INSERT INTO other_table ... // write based on the read
6) COMMMIT TRANSACTION
In this code, I'm doing an INSERT, followed by a SELECT, and then conditionally doing another INSERT based on the outcome of the SELECT.
So my question is, if another process modifies the database between steps (3) and (5), what happens to the count variable, and to my transaction?
If it makes a difference, I am using PostgreSQL.
As Xin pointed out, it depends on the isolation level.
At the default READ COMMITTED level, records from other sessions will become visible as they are committed; you would see the same records if you didn't start a transaction at all (though of course, other processes would see your inserts appear at different times).
With REPEATABLE READ, your queries will not see any records committed by other sessions after your transaction starts. But while you don't have to worry about the result of SELECT COUNT(*) changing during your transaction, you can't assume that this result will still be accurate by the time you commit.
Using SERIALIZABLE provides the strongest guarantee: if your script does the right thing when given exclusive access to the database, then it will do the right thing in the presence of other serialisable transactions (or it will fail outright). However, this means that all transactions which might interfere with yours must be using the same isolation level (which comes at a cost), and all must be prepared to retry their transaction in the event of a serialisation failure.
When serialisable transactions are not an option, you generally guard against race conditions by explicitly locking things against concurrent writes. It's often enough to lock a selection of records, but you can't exactly lock the result of a COUNT(*); in your case, you'd probably need to lock the whole table.
I am not working on postgreSQL, but I think I can answer your question. Think of every query is parallel. I am saying so, because there are 2 transactions: when you insert into a; others can insert into b; then when you check b; whether you can see the new data depends on your isolation setting (read committed or just dirty read).
Also please note that, in database, there is a technology called lock: you can lock a table so that prevent altering it from others before committing your transaction.
Hope
I'm using PostgreSQL 9.2 in a Windows environment.
I'm in a 2PC (2 phase commit) environment using MSDTC.
I have a client application, that starts a transaction at the SERIALIZABLE isolation level, inserts a new row of data in a table for a specific foreign key value (there is an index on the column), and vote for completion of the transaction (The transaction is PREPARED). The transaction will be COMMITED by the Transaction Coordinator.
Immediatly after that, outside of a transaction, the same client requests all the rows for this same specific foreign key value.
Because there may be a delay before the previous transaction is really commited, the SELECT clause may return a previous snapshot of the data. In fact, it does happen sometimes, and this is problematic. Of course the application may be redesigned but until then, I'm looking for a lock solution. Advisory Lock ?
I already solved the problem while performing UPDATE on specific rows, then using SELECT...FOR SHARE, and it works well. The SELECT waits until the transaction commits and return old and new rows.
Now I'm trying to solve it for INSERT.
SELECT...FOR SHARE does not block and return immediatley.
There is no concurrency issue here as only one client deals with a specific set of rows. I already know about MVCC.
Any help appreciated.
To wait for a not-yet-committed INSERT you'd need to take a predicate lock. There's limited predicate locking in PostgreSQL for the serializable support, but it's not exposed directly to the user.
Simple SERIALIZABLE isolation won't help you here, because SERIALIZABLE only requires that there be an order in which the transactions could've occurred to produce a consistent result. In your case this ordering is SELECT followed by INSERT.
The only option I can think of is to take an ACCESS EXCLUSIVE lock on the table before INSERTing. This will only get released at COMMIT PREPARED or ROLLBACK PREPARED time, and in the mean time any other queries will wait for the lock. You can enforce this via a BEFORE trigger to avoid the need to change the app. You'll probably get the odd deadlock and rollback if you do it that way, though, because INSERT will take a lower lock then you'll attempt lock promotion in the trigger. If possible it's better to run the LOCK TABLE ... IN ACCESS EXCLUSIVE MODE command before the INSERT.
As you've alluded to, this is mostly an application mis-design problem. Expecting to see not-yet-committed rows doesn't really make any sense.