I am new to Coverity,I am using it from the command prompt with it's .exe files.So I want to pass specific macros in coverity cov-build.exe so that those macros will be implemented when cov-emit.exe(when it is called by cov-build.exe) is parsing the .c files.Till now I have tried the below stated configurations.
code-build.exe Intermediate_folder --delete-stale-tus --preprocessor-first --return-emit-failure "My_bat_file" -- -D My_macro_name=my_macro_body
So any help will be much be appreciated.I am stuck on this.
Thanks and regards,
Newbie_in
cov-build wraps your existing build command, monitors it and spawns parallel compiler invocations in order to understand your code. These parallel compiler invocations will see the same command line being passed to your own compiler.
So if you want this define to take effect for your compiler as well as Coverity's then you should simply just add it to your build the way you would normally and Coverity will see it.
If you want to add a define that only Coverity's compiler can see, this is best done with within the config for your compiler.
You can either edit the config directly (add
<append_arg>-Dmy_macro_name=my_macro_body</append_arg>
after the <begin_command_line_config> line), or re-configure using --xml-option.
For example, if you're using the shortcut gcc config this would look like this:
$ cov-configure --gcc --xml-option=append_arg>-Dmy_macro_name=my_macro_body.
I noticed you're using --preprocess-first on the cov-build command line - I recommend against this, as it destroys XREFs making it much more difficult to browse defect information, as well as makes the analysis unable to find some defects (i.e. ones that are due to macros). --preprocess-next behaves like --preprocess-first and will only fire if the initial compilation attempt fails, so if you're using --preprocess-first to work around compilation issues, I strongly recommend using --preprocess-next instead.
If you do have compilation issues, it's always good to report them (along with a reproducer) to Coverity support so that they can be fixed in future releases.
Related
I've been learning Swift for a little bit now, and I really want to use it. However, compiling Swift on Windows is quite a chore. I can do it from Visual Studio 2015 easily, but VS2015 support is very poor, and incredibly hard to work with; I would prefer to use Atom and the command line. I use RemObject's Silver to compile to .NET, but I can never get the command line to work.
When I use the Elements.exe at C:\Program Files (x86)\RemObjects Software\Elements\Bin, passing the filename as a parameter, it tells me that print is undefined.
Does anyone know how to use Silver's command line to compiler Swift?
Have you tried referencing the online documentation?
calling elements needs some libraries to import:
elements --mode=ECHOES --reference=Swift myfile.swift
I recommend using MSBuild, rather than Elements.exe, to build Elements projects from the command line. It's more complete and supports more advanced build tasks needed for some project types.
That said, --mode and --reference should definitely work. Can you post a complete command line and output?
You will need --reference=Swift in order for print() & co to be known, and --reference System.Core to use LINQ.
Simple question here, just can't seem to pass it google in a way it can understand.
Say I wanted to execute a line of actual programming code (c++ or java or python... etc) like SetCursorPos or printf from the command prompt command line. I vaguely imagine I would have to invoke the compiler and pass the command to it like a parameter, where from it would then be converted into machine language and passed to... where exactly?
Okay so that was kind of two questions.
How to run actual code from the command line and
what exactly is happening when a fully compiled program, or converted line of code (presuming these are essentially binary containers at that point), is executed?
Question one takes priority obviously. Unfortunately, I can not find any documentation on it, just a bunch of stuff vaguely related to it.
How to run actual code from the command line
Without delving into the vast amounts of blurriness between them, there are two major categories of language implementations: interpreters and compilers.
With many interpreters (or implementations with implicit compilation, such as V8 JavaScript's jit compiler, or pretty much anything with a repl), running a single line from the command line should be fairly trivial. CPython (the standard implementation of Python) has the -c command option:
$ python -c 'print("Hello, world!")'
Hello, world!
Language implementations with explicit compilation steps will tend to be decidedly less simple. In particular, the compiler would need to either accept source either from directly out of the argument list, or from standard input (via piping or redirection). On the output side, your compiler would have to support immediately executing that program, or outputting it to standard out, so that an operating system feature (if it exists) can execute it from a pipe.
To my knowledge, most explicit compilers are not designed with such usage in mind. In such cases, your best bet is to see if there is a REPL available for the language in question, preferably one as compatible with your compiler as possible, or to create (or find) a wrapper that makes it look like your language has a REPL. The wrapper would:
Accept input along the lines of CPython above.
Create a temporary source file behind the scenes with the code to be run and any necessary boilerplate.
Pass that file to the compiler.
Automatically run the resulting executable.
Delete the source file and executable. These may be cleaned up by the operating system later instead, if they're in a temp directory.
From the point of view of the user, this should look pretty similar to the CPython example, as they wouldn't have to interact with or see the compiler or temporary files.
I'm solving a problem about scala tracing.
What I want to do is get the environment after executing each line of a scala file, which means, for a program in scala, I could know which line it is executing now and the variables existing now, for every line.
Now I'm using the method of stepping. I let the program step into or step return automatically(by editting the scala IDE in Eclipse) for every line, and then I could get what we want.
But for a long program, it's very slow and will cost a large amount of memory, more than 20GB!
So do you have any better idea about how to achieve it?Give me the whole trace in source code format for every line of a program, with source file path, line number and current variables.
Thanks!
AFAIK there is no free/opensource tools for the task you described, only commercial ones:
Chronon, but looks like that only Java is supported.
Jidebug, I also not sure about Scala.
They both can record runtime traces of your JVM code and later you can drill into these to understand what has happened there.
Most of the applications we developers write need to be externally parametrized at startup. We pass file paths, pipe names, TCP/IP addresses etc. So far I've been using command line to pass these to the appplication being launched. I had to parse the command line in main and direct the arguments to where they're needed, which is of course a good design, but is hard to maintain for a large number of arguments. Recently I've decided to use the environment variables mechanism. They are global and accessible from anywhere, which is less elegant from architectural point of view, but limits the amount of code.
These are my first (and possibly quite shallow) impressions on both strategies but I'd like to hear opinions of more experienced developers -- What are the ups and downs of using environment variables and command line arguments to pass arguments to a process? I'd like to take into account the following matters:
design quality (flexibility/maintainability),
memory constraints,
solution portability.
Remarks:
Ad. 1. This is the main aspect I'm interested in.
Ad. 2. This is a bit pragmatic. I know of some limitations on Windows which are currently huge (over 32kB for both command line and environment block). I guess this is not an issue though, since you just should use a file to pass tons of arguments if you need.
Ad. 3. I know almost nothing of Unix so I'm not sure whether both strategies are as similarily usable as on Windows. Elaborate on this if you please.
1) I would recommend avoiding environmental variables as much as possible.
Pros of environmental variables
easy to use because they're visible from anywhere. If lots of independent programs need a piece of information, this approach is a whole lot more convenient.
Cons of environmental variables
hard to use correctly because they're visible (delete-able, set-able) from anywhere. If I install a new program that relies on environmental variables, are they going to stomp on my existing ones? Did I inadvertently screw up my environmental variables when I was monkeying around yesterday?
My opinion
use command-line arguments for those arguments which are most likely to be different for each individual invocation of the program (i.e. n for a program which calculates n!)
use config files for arguments which a user might reasonably want to change, but not very often (i.e. display size when the window pops up)
use environmental variables sparingly -- preferably only for arguments which are expected not to change (i.e. the location of the Python interpreter)
your point They are global and accessible from anywhere, which is less elegant from architectural point of view, but limits the amount of code reminds me of justifications for the use of global variables ;)
My scars from experiencing first-hand the horrors of environmental variable overuse
two programs we need at work, which can't run on the same computer at the same time due to environmental clashes
multiple versions of programs with the same name but different bugs -- brought an entire workshop to its knees for hours because the location of the program was pulled from the environment, and was (silently, subtly) wrong.
2) Limits
If I were pushing the limits of either what the command line can hold, or what the environment can handle, I would refactor immediately.
I've used JSON in the past for a command-line application which needed a lot of parameters. It was very convenient to be able to use dictionaries and lists, along with strings and numbers. The application only took a couple of command line args, one of which was the location of the JSON file.
Advantages of this approach
didn't have to write a lot of (painful) code to interact with a CLI library -- it can be a pain to get many of the common libraries to enforce complicated constraints (by 'complicated' I mean more complex than checking for a specific key or alternation between a set of keys)
don't have to worry about the CLI libraries requirements for order of arguments -- just use a JSON object!
easy to represent complicated data (answering What won't fit into command line parameters?) such as lists
easy to use the data from other applications -- both to create and to parse programmatically
easy to accommodate future extensions
Note: I want to distinguish this from the .config-file approach -- this is not for storing user configuration. Maybe I should call this the 'command-line parameter-file' approach, because I use it for a program that needs lots of values that don't fit well on the command line.
3) Solution portability: I don't know a whole lot about the differences between Mac, PC, and Linux with regard to environmental variables and command line arguments, but I can tell you:
all three have support for environmental variables
they all support command line arguments
Yes, I know -- it wasn't very helpful. I'm sorry. But the key point is that you can expect a reasonable solution to be portable, although you would definitely want to verify this for your programs (for example, are command line args case sensitive on any platforms? on all platforms? I don't know).
One last point:
As Tomasz mentioned, it shouldn't matter to most of the application where the parameters came from.
You should abstract reading parameters using Strategy pattern. Create an abstraction named ConfigurationSource having readConfig(key) -> value method (or returning some Configuration object/structure) with following implementations:
CommandLineConfigurationSource
EnvironmentVariableConfigurationSource
WindowsFileConfigurationSource - loading from a configuration file from C:/Document and settings...
WindowsRegistryConfigurationSource
NetworkConfigrationSource
UnixFileConfigurationSource - - loading from a configuration file from /home/user/...
DefaultConfigurationSource - defaults
...
You can also use Chain of responsibility pattern to chain sources in various configurations like: if command line argument is not supplied, try environment variable and if everything else fails, return defauls.
Ad 1. This approach not only allows you to abstract reading configuration, but you can easily change the underlying mechanism without any affect on client code. Also you can use several sources at once, falling back or gathering configuration from different sources.
Ad 2. Just choose whichever implementation is suitable. Of course some configuration entries won't fit for instance into command line arguments.
Ad 3. If some implementations aren't portable, have two, one silently ignored/skipped when not suitable for a given system.
I think this question has been answered rather well already, but I feel like it deserves a 2018 update. I feel like an unmentioned benefit of environmental variables is that they generally require less boiler plate code to work with. This makes for cleaner more readable code. However a major disadvatnage is that they remove a layers of isolation from different applications running on the same machine. I think this is where Docker really shines. My favorite design pattern is to exclusively use environment variables and run the application inside of a Docker container. This removes the isolation issue.
I generally agree with previous answers, but there is another important aspect: usability.
For example, in git you can create a repository with the .git directory outside of that. To specify that, you can use a command line argument --git-dir or an environmental variable GIT_DIR.
Of course, if you change the current directory to another repository or inherit environmental variables in scripts, you get a mistake. But if you need to type several git commands in a detached repository in one terminal session, this is extremely handy: you don't need to repeat the git-dir argument.
Another example is GIT_AUTHOR_NAME. It seems that it even doesn't have a command line partner (however, git commit has an --author argument). GIT_AUTHOR_NAME overrides the user.name and author.name configuration settings.
In general, usage of command line or environmental arguments is equally simple on UNIX: one can use a command line argument
$ command --arg=myarg
or an environmental variable in one line:
$ ARG=myarg command
It is also easy to capture command line arguments in an alias:
alias cfg='git --git-dir=$HOME/.cfg/ --work-tree=$HOME' # for dotfiles
alias grep='grep --color=auto'
In general most arguments are passed through the command line. I agree with the previous answers that this is more functional and direct, and that environmental variables in scripts are like global variables in programs.
GNU libc says this:
The argv mechanism is typically used to pass command-line arguments specific to the particular program being invoked. The environment, on the other hand, keeps track of information that is shared by many programs, changes infrequently, and that is less frequently used.
Apart from what was said about dangers of environmental variables, there are good use cases of them. GNU make has a very flexible handling of environmental variables (and thus is very integrated with shell):
Every environment variable that make sees when it starts up is transformed into a make variable with the same name and value. However, an explicit assignment in the makefile, or with a command argument, overrides the environment. (-- and there is an option to change this behaviour) ...
Thus, by setting the variable CFLAGS in your environment, you can cause all C compilations in most makefiles to use the compiler switches you prefer. This is safe for variables with standard or conventional meanings because you know that no makefile will use them for other things.
Finally, I would stress that the most important for a program is not programmer, but user experience. Maybe you included that into the design aspect, but internal and external design are pretty different entities.
And a few words about programming aspects. You didn't write what language you use, but let's imagine your tools allow you the best possible argument parsing. In Python I use argparse, which is very flexible and rich. To get the parsed arguments, one can use a command like
args = parser.parse_args()
args can be further split into parsed arguments (say args.my_option), but I can also pass them as a whole to my function. This solution is absolutely not "hard to maintain for a large number of arguments" (if your language allows that). Indeed, if you have many parameters and they are not used during argument parsing, pass them in a container to their final destination and avoid code duplication (which leads to inflexibility).
And the very final comment is that it's much easier to parse environmental variables than command line arguments. An environmental variable is simply a pair, VARIABLE=value. Command line arguments can be much more complicated: they can be positional or keyword arguments, or subcommands (like git push). They can capture zero or several values (recall the command echo and flags like -vvv). See argparse for more examples.
And one more thing. Your worrying about memory is a bit disturbing. Don't write overgeneral programs. A library should be flexible, but a good program is useful without any arguments. If you need to pass a lot, this is probably data, not arguments. How to read data into a program is a much more general question with no single solution for all cases.
Take an undocumented executable of unknown origin. Trying /?, -h, --help from the command line yields nothing. Is it possible to discover if the executable supports any command line options by looking inside the executable? Possibly reverse engineering? What would be the best way of doing this?
I'm talking about a Windows executable, but would be interested to hear what different approaches would be needed with another OS.
In linux, step one would be run strings your_file which dumps all the strings of printable characters in the file. Any constants chars will thus be shown, including any "usage" instructions.
Next step could be to run ltrace on the file. This shows all function calls the program does. If it includes getopt (or familiar), then it is a sure sign that it is processing input parameters. In fact, you should be able to see exactly what argument the program is expecting since that is the third parameter to the getopt function.
For Windows, you can see this question about decompiling Windows executables. It should be relatively easy to at least discover the options (what they actually do is a different story).
If it's a .NET executable try using Reflector. This will convert the MSIL code into the equivalent C# code which may make it easier to understand. Unfortunately private and local variable names will be lost, as these are not stored in the MSIL but it should still be possible to follow what's going on.