I am trying to install CentOs 6.7 on a VPS. I downloaded the LiveCD iso from CentOs's website and put it on a bootable thumb drive, and even burned it to CD, however when booting from either sources, I get this error.
I have even re-download the same file from different source links but the same thing happens.
use second newest kernel.
i.e:
During a startup, press ESC to stop the boot
login and remove the kernel you are using. download the newest kernel then restart
Related
im trying to make v4l2loopback work on my desktop PC (no hardware camera) with mint 19.3, kernel 5.4.0-42-generic x86_64.
I followed the official instructions and compiled from git the v4l2loopback module and everything seem to run correctly, as no error prompted while running the instructions, but when i do ll /dev/v* there's no /dev/videoN entry.
I also tried with the flags exclusive_caps=1 and devices=2 but to no avail.
Any idea what i might be missing or doing wrong?
you need to load the module (e.g. using modprobe) before you can use it.
see also https://github.com/umlaeute/v4l2loopback#run
I need to install Concourse(CI/CD) on my Local windows machine
Below process I followed :
Install Bosh on local system.
It was successfully install and while executing command at command prompt
then it show version all "bosh" -- "version 3.0.1-712bfd7-2018-03-13T23:26:43Z".
Try Download the concourse-lite deployment manifest file but it fails it shows below error.
Follow the below link to install Concourse :
https://concoursetutorial.com/ --- section For Windows:
I don't reccomend doing this at all because you'll be swimming so far out of the main stream that you'll find tons of issues and no one is going to care enough to want to fix them.
Even if you didn't find any issues, resources require a linux worker for anything to work so your going to need linux anyways.
I recommend running your db, web and linux worker on linux and then running windows workers as needed.
I'm using a Python application that accesses a USB device (pipsta printer) and executes a routine. It's running fine outside the container, but when it comes to the container it returns a error like this:
(File "usr/local/lib/python2.7/dist-packages/usb/backend/libusb0.py", line 386, in _check:
raise USBError(errmsg, ret)
USB.core.USBError: [Errno None] couldn't opendir(): No such a file or directory)
In my dockerfile, I've included all the packages relevant to Python and USB, and I also moved the relevant files to /etc/udev/rules.d and restarted udev.
Make sure you:
followed every step from assembly instruction and https://bitbucket.org/ablesystems/pipsta/wiki/Pipsta%20First-Time%20Setup
printer is connected to the power
printer is connected via usb to raspberry
printer's led doesn't blink (should be green constantly)
proper usb library is installed (or try to install different version of the usb library). What version are you using? python: print(usb.__version__) , it works fine for me with version 1.0.0rc1
is printer visible to the os? command: ls /dev/ap1400
I know this is an old question (I've only just encountered it). The following is a paraphrasing of the FAQ. The following steps should help diagnose the problem.
Download the latest set of Pipsta examples..
Extract the contents of the zip file.
Change directory to where the files were extracted
Change directory to the Examples folder.
Using a terminal run the command python verify_pipsta_install.py. This will try and help diagnose problems.
The following will should fix the python usb library error.
If your Pipsta printer firmware is V9.2.03 please upgrade the firmware to V9.2.08 using the fpu (both can be found in the downloads section of bit bucket.
Install the latest version of the Pipsta examples (download from bitbucket).
Copy the new pipsta/Examples/system_scripts/ to /etc/udev/rules.d/60-ablesystems-pyusb.rules
Restart the Raspberry Pi
If the printer still fails to be discovered then -
The following workaround may work.
1. Unplug the printer from the USB port
1. Enter the command sudo lsusb
1. Reconnect the printer
1. Enter the command sudo lsusb
If the printer has been detected by the Linux environment then either /dev/ap1400 or /dev/pipsta should exist in the filesystem.
NOTE The Pipsta now has Debian packages to help with installation. I have a link limit on my account but search for pipsta-printer-utilities-1.1.1-Linux.deb and pipsta-cups-driver-0.3.0-armhf.deb for more information.
I have been using Linux for less than 24 hours, so please, if there is anymore information I should provide, do be quite specific about how to get that information.
I've been trying to install Node.js, express.js and eclipse. As you can see, ubuntu does recognise both node.js and express as installed on my system (I think!) and I got the Nodeclipse-extension for eclipse, but still Eclipse doesn't seem to recognise either node.js or express (see my image below). I also want to add that the time occurrence of the error, I was trying to build a Node.js Express Project.
At this point, how do I go about debugging the situation? The folder location shown in the image does not fully exist. I can only go as far as [...]/bin/ - I have been looking at error messages similar to mine, and it seems like people are getting such errors because they're lacking an installation, however, from my screenshot provided, I would think everything is installed as needed.
I am using a native 64-bit windows laptop with Linux (Ubuntu) installed through a virtualbox. Ubuntu is 14.04 LTS and just 32-bit, as I don't have spare 2 gb ram to give the 64-bit version. Sadness.
I'd appreciate any help!
In Eclipse Windows -> Preferences -> Nodeclipse
check what is configured for Node and Express
Read more on http://www.nodeclipse.org/
I found a solution, which worked for me:
WINDOWS:
I did double installations of the needed modules. They were both located in C:/Users/X/AppData/Roaming, in the Eclipse directories and finally in C:/Program Files/nodejs. When I deleted all the node_modules, besides critical ones for nodejs to function and then ran Eclipse with Nodeclipse, it seemed to function and Eclipse automaticly defined folders in its own subdirectory, in which Express were located.
UBUNTU:
Delete all node_modules files and run Eclipse with Nodeclipse. See the windows explanation for a more detailed overview. Same problem and solution seemed to be present for both systems. Do note that the file directories are of course not completely interchangeable. You'll need to locate your instances of node_module.
I am running a virtualbox with debian installed as local webserver. I am working with eclipse directly on that virtual box with a remote project (RSE plugin). I am having the problem that eclipse starts the DLTK-indexer as soon as I open the project. On the debian machine, instantly my /var/log/auth.log is filling up with a endless list of:
sshd[4271]: error: no more sessions
In eclipse, the error log is filling up with (although using JRE 6):
org.eclipse.core.runtime.CoreException: Operation failed. File system input or output error: rse://xxx.xxx.xxx.xxx/path/to/file/being/indexed
org.eclipse.rse.services.files.RemoteFileIOException: Operation failed. File system input or output error
While indexing is done, I am not able to save any file I am working on, as all ssh-sessions are already used on the server.
It seems that the indexing process tries to open a new connection for every file it´s indexing.
When indexing is finished, everything works normal again, I can save files etc.
I would appreciate the indexer to complete its work, but as code completion does not work afterwards, eclipse was not able to do the indexing.
One solution would be to disable the indexing, but this is not the purpose of an IDE, code completion is one of the few reasons for me to still use an IDE (at least for large projects).
Any ideas on how to make indexing work and get rid of the ssh-errors would be great!
Futher system information:
Host-System: Windows 7 Prof. 64bit
Guest-System (virtualbox): Debian Lenny with sftp subsystem enabled
Eclipse: Indigo with Zend PDT and RSE (already running with Java 6 JRE 1.6.0_45)
Thanks for your help!
David
I was able to fix this issue by doing two things:
set up ssh to use multiplexing (see http://en.wikibooks.org/wiki/OpenSSH/Cookbook/Multiplexing) in the virtual machine
Upgrade eclipse to Kepler 64Bit release (much faster and more stable in Windows 7) with manual installation of PDT feature (using Zend PDT is a waste of time)
This also works with Java7!
Now I have completely indexed projects and can use code-completion!