After ensuring that all the libraries (only newer) seemed to exist on Wildfly 9, and checking the RestEasy migration page, I tried to deploy an app that works find on AS 7.1.1 (uses Resteasy 2.3.2) to WF9 (Resteasy 3.0.11) but it was unable to deploy due to this error:
Caused by: java.lang.NoClassDefFoundError: org/jboss/resteasy/core/ResourceMethod
Caused by: java.lang.ClassNotFoundException: org.jboss.resteasy.core.ResourceMethod from [Module \\\"deployment.CodecMapper.war:main\\\" from Service Module Loader]\"}}"
I jarfinded the class and looked in the catalog of resteasy-jaxrs-3.0.11-Final.jar but didn't find it (it was in the 2.3.2 version). Is it in a new jar or failed dependency? Or is this a migration issue I'll need to address in my code (even though it's not listed as one on the Resteasy migration page)?
I have also reviewed the Wildfly migration page specific to Resteasy, but I don't see any changes required.
Related
Oracle Jdeveloper (Version 11.1.1.6.0) building ADF application that generate PDF file using Apache FOP Library. My Application runs local web server. But when deploy in production server, below NoClassDefFoundError exception is showing and failing to generate PDF file.
Exception output:
<code>
javax.el.ELException: java.lang.NoClassDefFoundError: org/apache/avalon/framework/configuration/ConfigurationException
at com.sun.el.parser.AstValue.invoke(AstValue.java:191)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)
...
...
Caused by: java.lang.NoClassDefFoundError: org/apache/avalon/framework/configuration/ConfigurationException
at org.apache.fop.apps.FopFactory.<init>(FopFactory.java:153)
at org.apache.fop.apps.FopFactory.newInstance(FopFactory.java:177)
...
...
Caused by: java.lang.ClassNotFoundException: org.apache.avalon.framework.configuration.ConfigurationException
...
...
</code>
A NoClassDefFoundError with a caused by ClassNoFoundException points to a missing library on the server. Have you checked your deployment artifact (the EAR) if it contains all the needed FOP jars?
If all jars are part of the EAR (or better the WAR inside the EAR), you need to tell the Weblogic Server to load the jars from your deployment first before looking into jars already on the server. See https://tompeez.wordpress.com/2015/06/06/pitfalls-when-using-newer-versioned-libraries-than-shipped-with-jdeveloper-or-weblogic-server/ for more info on that.
I am trying to configure my ESB server as a client for JBoss EAP 7.1 integrated Active MQ Artemis which will connect using the RemoteConnectionFactory. However, I couldn't use the JBoss client jar as it conflicts with the internal JARs. Therefore, I added all the necessary JARs separately.
Now an exception is being thrown saying no provider found.
I have added both xnio-api and xnio-nio jars.
Below is the exception.
Caused by: java.lang.IllegalArgumentException: XNIO001001: No XNIO provider found
at org.xnio.Xnio.doGetInstance(Xnio.java:226)
at org.xnio.Xnio.getInstance(Xnio.java:192)
at org.jboss.naming.remote.client.EndpointCache.get(EndpointCache.java:47)
at org.jboss.naming.remote.client.InitialContextFactory.createEndpoint(InitialContextFactory.java:226)
at org.jboss.naming.remote.client.InitialContextFactory.getOrCreateEndpoint(InitialContextFactory.java:207)
at org.jboss.naming.remote.client.InitialContextFactory.getOrCreateNamingStore(InitialContextFactory.java:170)
at org.jboss.naming.remote.client.InitialContextFactory.getInitialContext(InitialContextFactory.java:146)
... 50 more
How do I resolve this error?
I'm trying to make new icefaces project which generated using: ICEfaces 3.3.0 project integration for Eclipse.
I didn't modify anything on the project. but when i try to run on the server, i got an error:
cannot Deploy MyProject
Deployment Error for module: MyProject:
Exception while loading the app : java.lang.Exception:
java.lang.IllegalStateException: ContainerBase.addChild:
start: org.apache.catalina.LifecycleException:
java.lang.NoSuchFieldError: SKIP_ITERATION
before that, I'm using ICEfaces 3.2.0 project integration for Eclipse and no problem.
I'm using Eclipse Indigo, GlassFish server 3, Mojarra 2.1.6
Thanks before
java.lang.NoSuchFieldError: SKIP_ITERATION
As per the javadoc, that field was added in JSF 2.1.
So, this error suggests that your webapp's runtime classpath is polluted with a JSF 2.0 API JAR file. Perhaps in the /WEB-INF/lib? Get rid of it. Glassfish already ships with JSF bundled, you don't necessarily need to supply your own. Or, from the other side on, this can also happen if you deploy to an ancient Glassfish instance which bundles JSF 2.0 and JSF 2.1 was actually bundled in your webapp in an attempt to upgrade it. If so, then you should edited the Glassfish config file sun-web.xml or glassfish-web.xml, depending on GF version. See for detail the answer to this related question: How to update Mojarra version in GlassFish
I have a generated jax-ws web service client that runs fine when I run it as a java standalone project. However if I add it to a web application (war) deployed on JBoss 7.1.1 and call the web service it throws the following exception:
Caused by: java.lang.NoClassDefFoundError: com/ctc/wstx/io/DefaultInputResolver
at com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:628)
at com.ctc.wstx.stax.WstxInputFactory.createXMLStreamReader(WstxInputFactory.java:324)
at __redirected.__XMLInputFactory.createXMLStreamReader(__XMLInputFactory.java:139) [jboss-modules.jar:1.1.1.GA]
at org.apache.cxf.staxutils.StaxUtils.createXMLStreamReader(StaxUtils.java:1176)
at org.apache.cxf.interceptor.StaxInInterceptor.handleMessage(StaxInInterceptor.java:104)
at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:263)
at org.apache.cxf.endpoint.ClientImpl.onMessage(ClientImpl.java:795)
at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.handleResponseInternal(HTTPConduit.java:1626)
at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.handleResponse(HTTPConduit.java:1493)
at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.close(HTTPConduit.java:1401)
at org.apache.cxf.transport.AbstractConduit.close(AbstractConduit.java:56)
at org.apache.cxf.transport.http.HTTPConduit.close(HTTPConduit.java:648)
at org.apache.cxf.interceptor.MessageSenderInterceptor$MessageSenderEndingInterceptor.handleMessage(MessageSenderInterceptor.java:62)
at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:263)
at org.apache.cxf.endpoint.ClientImpl.doInvoke(ClientImpl.java:531)
at org.apache.cxf.endpoint.ClientImpl.invoke(ClientImpl.java:461)
at org.apache.cxf.endpoint.ClientImpl.invoke(ClientImpl.java:364)
at org.apache.cxf.endpoint.ClientImpl.invoke(ClientImpl.java:317)
at org.apache.cxf.frontend.ClientProxy.invokeSync(ClientProxy.java:88)
at org.apache.cxf.jaxws.JaxWsClientProxy.invoke(JaxWsClientProxy.java:134)
at $Proxy189.getcodelists(Unknown Source)
Idea what I may be missing?
As the error says, the App server is unable to find the said class file. Is it possible in your standalone app your classpath has the library but JBoss AS 7 is unable to find it.
If you can isolate where this library is, you can either bundle it with your WAR file or create a jboss_module to satisfy the dependency.
Good luck!
I'm developing an application that uses the Geotools, which in turn uses the Java Advanced imaging (JAI) API to run under Glassfish. When I run my application from Netbeans as an EJB jar file it fails to deploy because of a ClassNotFoundException during CDI scanning :
com.google.common.collect.ComputationException: org.jboss.weld.resources.spi.ResourceLoadingException: Error loading class org.autogena.skyserver.data.filetypes.SwathFile
at com.google.common.collect.ComputingConcurrentHashMap.compute(ComputingConcurrentHashMap.java:218)
....
Caused by: org.jboss.weld.resources.spi.ResourceLoadingException: Error loading class org.autogena.skyserver.data.filetypes.SwathFile
at org.jboss.weld.resources.ClassTransformer.loadClass(ClassTransformer.java:189)
.....
Caused by: java.lang.NoClassDefFoundError: javax/media/jai/PropertySource
at java.lang.ClassLoader.defineClass1(Native Method)
....
Caused by: java.lang.ClassNotFoundException: javax.media.jai.PropertySource
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
However, if I package the EJB module into an EAR file then I don't get the exception above and it seems to load ok.
Since on the Mac the JAI core classes are in the system extension library I'm baffled how it's not showing up on the classpath.
Is there a difference between an EJB jar and and EAR file when it comes to class loading, or is this a big in Glassfish / Weld?
Come to think of it - how is glassfish finding the libraries my prject uses anyway - they don't seem to be packaged into the ejb jar file - is netbeans doing something clever under the hood here that's going somehow askew?
thanks,
Josh
Try to configure the CLASSPATH on Glassfish in order to use the JAI libraries.