We got following issue when we test SonarQube 5.2. Perforce plugin starts to behave incorrectly. It prints error in log:
[07:30:30]W: [] [ERROR] Perforce password (P4PASSWD) invalid or unset.
[07:30:30] : [] [DEBUG] Perforce password (P4PASSWD) invalid or unset.
Even if I set -X for Maven I did not get more details why it prints this error.
Only difference it that it uses SonarQube 5.2. On SonarQube 5.1.2 it works fine. Also it looks like upload passes and no report is shows on SonarQube server UI.
Only message I see on server log is:
12:32:31 ERROR web[o.s.s.c.t.CeWorkerRunnableImpl] Executed task | project=<prjkey>
| id=AVFYYUYrsGEyA8a-XeTJ | time=2231ms
again without any details even if I set DEBUG log level.
Secondary problem is that I tried to register to JIRA for SonarQube but I am not able to create new issue. I can only view existing issues. So only option is to ask here.
P4PASSWD is a variable which is supposed to contains the password of the current user.
Check if you have entered it somewhere in the plugin configuration. You can also try to set it up manually by calling p4 set P4PASSWD=XXX. This is not the cleanest solution but it might be a temporary workaround.
Related
I'm using these settings in install4j.vmoptions (install4j 7.0.4):
# Clear out cached proxy information
-Dinstall4j.clearProxyCache=true
# and hopefully prevent install4j from reloading it from the default browser
-Dinstall4j.noProxyAutoDetect=true
# Unconditionally shows proxy config dialog
-Dinstall4j.showProxyConfig=true
# Log issues to %TEMP%\install4j_error.log
-Dinstall4j.showConnectError=true
I do not get a proxy dialog; the output in the error log is this:
java.io.IOException: Proxy password required. Please set the parameter -DproxyAuthPassword=[password].
at com.install4j.runtime.installer.helper.content.HttpRequestHandler.askForProxyPassword(HttpRequestHandler.java:335)
at com.install4j.runtime.installer.helper.content.HttpRequestHandler.getURLConnection(HttpRequestHandler.java:233)
at com.install4j.runtime.installer.helper.content.HttpRequestHandler.connect(HttpRequestHandler.java:124)
at com.install4j.runtime.installer.helper.content.Downloader.connect(Downloader.java:151)
at com.install4j.runtime.installer.helper.content.Downloader.connect(Downloader.java:24)
at com.install4j.runtime.installer.helper.content.HttpRequestHandler.connect(HttpRequestHandler.java:117)
at com.install4j.runtime.installer.helper.content.Downloader.connect(Downloader.java:146)
at com.install4j.gui.c.h.c(ejt:72)
at com.install4j.gui.c.h.run(ejt:38)
This runs contrary to the following two assumptions:
1) install4j should record the proxy settings.
2) install4j should show a proxy dialog with these settings.
What did I miss?
UPDATE: -DproxyAuth=false would change the error message, it would now complain about certificate problems.
This concerns the JRE downloads in the install4j IDE and will be fixed in 7.0.7.
Please write to support#ej-technologies.com to get a build that contains the fix.
Alternatively, you can download JRE bundles manually from
https://download.ej-technologies.com/bundles/list
I am running 7.0.0.CR2 of workbench and server in a docker container. It looks on first view that they are working perfectly together. However, when I select the tasks tab in the workbench I get the following error:
Unable to complete your request. The following exception occurred:
Can't lookup on specified data set: jbpmHumanTasksWithUser.
This lead me to this bug: https://issues.jboss.org/browse/JBPM-5432
There they are saying that this is caused by a user not having the kie-server role. There is no kie-server role in my installation, there is however a kie-server group, and the user I am using is a member of this group.
Dockerfile and user and role files can be found here:
https://gist.github.com/martijnburger/c9a1072746d94ffe4beff72830e03ca7
I believe it could be due to a missing login module in your set up, to ensure the role/authentication is passed on to the Kie Server, you need to add a custom login module. Please check this example as reference: https://github.com/cristianonicolai/kie-wb-dev-docker/blob/master/src/main/resources/standalone-full-kie.xml#L379
I recently setup Proget to try its nuget and chocolatey servers. Now when I try to publish packages to nuget feed through a teamcity build, I keep on getting error "proget Failed to process request. 'There was an error processing the request: Invalid API key.'.". I've made 100% sure that the name and password are working fine and specified API key as per Proget doco (i.e. username:password ) . THat feed already has one package which I published on the day I installed Proget for trying out. What could have gone wrong?
I found a work around.
[1] I confirmed that my username:password combination is correct.
[2] Then I renamed that original feed to feed_old (or whatever you
want or even delete it if it doesn't have anything important in it) I
had created for trying out and which wasn't allowing publishing
through teamcity and giving the error message as per the question's
message.
[3] Created new feed with the name I wanted.
[4] Confirmed that the username I was using in API key had necessary
privileges to publish to this new feed I just created.
[5] Then tested the publishing to this feed through teamcity and
VOILA!! it worked.
I don't know why this happened in the first place though. It would be good to find out and be able to fix underlying reason rather than using the above mentioned workaround.
Last night, at home, where I do not work with a proxy, updated a NuGet repository using NuGetPowerTools / Enable-PackageRestore.
Worked great.
Came into the office, where i am working with the same Repository under the following conditions:
in a VMWare based VM,
using Bridged Networking,
Reinstalled NuGet today, restarted (to be sure I have latest version)
runnning under an account in a DEV Domain (ie, DEV\Me)
Accessing the outer world via a Proxy that requires a corp Domain Account (ie, CORP\Me)
Ie 9's Configuration/Internet Options/Connection is setup as:
Use Proxy:
Address: yadayada1
Port: 80
Bypass proxy for local addresses
Automatically detect Settings
Above settings are correct in as much that I can access the web via IE9, Chrome, etc.
NOTE: Can list and download Nuget packages...it's just the new Build process that can't.
As per suggestion on the web I have looked at DevEnv.exe.config and have the following settings:
-<system.net><settings><ipv6 enabled="true" /></settings></system.net>
I also tried with these settings as
<system.net><defaultProxy useDefaultCredentials="true"><proxy autoDetect="True" usesystemdefault="True" /></defaultProxy></system.net>
so that DevEnv.exe falls back for to same connection settings that IE 9 is using. Didn't do it.
What I get for all this is:
------ Build started: Project: XAct.Core, Configuration: Debug Any CPU ------
Please provide proxy credentials:
UserName: Password:
C:_Workspaces\XAct\CS.FF.XAct.Lib2.nuget\NuGet.targets(43,9): error : Cannot read keys > when either application does not have a console or when console input has been redirected > from a file. Try Console.Read.
C:_Workspaces\XAct\CS.FF.XAct.Lib2.nuget\NuGet.targets(43,9): error MSB3073: The
command ""C:_Workspaces\XAct\CS.FF.XAct.Lib2.nuget\nuget.exe" install
"C:_Workspaces\XAct\CS.FF.XAct.Lib2\XAct.Core\XAct.Core\packages.config" -source "" -o
"C:_Workspaces\XAct\CS.FF.XAct.Lib2\packages"" exited with code 1.
Found (but unfortunately lost again) a thread somewhere on the net where I saw NuGet developers thrashing it out -- referring to downloading the latest build from their TeamCity (which I could not access/join) -- but the thread did not clearly say Eureka! at the bottom.
Thanks.
Reiterating what Sky and Pranav mentioned - this issue seems to be fixed in NuGet 1.7 - see http://nuget.codeplex.com/workitem/1655:
pranavkm wrote Jan 31 at 8:17 PM
Fixed in changeset 6c156e0dc214
when I want to start CVS repository explorer, it cannot connect to the server.
I entered something like "a.b.com" as "host" and "/c/d" as repository path. I entered my username and password and "module" name correctly. Does anybody know what the problem is?
Thank you so much.
shadi :)
It depends on:
the version of Eclipse
the way it fails (right at the beginning or after some time like bug 229982 )
what Windows/Show Views/Error log displays (is there an error message or an exception of some kind associated with the failed connection
external factors like a new anti-virus or firewall which would block some ports previously unblocked.
For instance, do you see this kind of error message as in this thread?
Errors saving CVS synchronization information to disk.
Please fix the problems listed below and then
update the affected resources from the CVS repository.
Could not get input stream
Could not get input stream
Operation failed. File system input or output error
As the OP Shadi says in the comments, it was a protocol issue:
I should have used "extssh" instead of "pserver".
which is compliant with:
this ticket: "'extssh' is a valid protocol in CVS nowadays.",
and the way eclipse uses CVS.