As part of optimizing a web development project, we need to strip out unnecessary characters that are never going to be used to reduce the size of font files. I have searched Google and found nothing canonical on the subject of which characters are required and which are safe to remove.
I've found the following ranges that may be of interest:
0020 — 007F Basic Latin
00A0 — 00FF Latin-1 Supplement
0100 — 017F Latin Extended-A
0180 — 024F Latin Extended-B
0250 — 02AF IPA Extensions
02B0 — 02FF Spacing Modifier Letters
0300 — 036F Combining Diacritical Marks
27C0 — 27EF Miscellaneous Mathematical Symbols-A
It seems that the most aggressive approach would be to only keep "Basic Latin", 0020 — 007F, which provides upper and lower-case letters, numbers and a few basic symbols, like the $, +, (, ), etc.
Latin-1 Supplement contains some extra goodies like Trademark and Copyright symbols and fractions.
Latin Extended-A and -B contain letters with accent marks, and since our copy is in English, I'm not sure if these will ever be needed.
If we use only that ranges (0020 — 007F) and (00A0 — 00FF), will we run into problems down the line with missing characters, should some user decide to post a comment in Spanish (for example)? Or will the browser fall back to a default font for characters that aren't included the web font?
The point of a web-font is to make the main bodies of text and headlines look pretty, which the basic latin set should cover, but I don't know if there are hidden "gotchas" with stripping down to just the "Basic Latin" range, like accented characters showing as diamond question marks instead of falling back to a system font, etc.
What range of unicode characters should be kept in a #font-face web
font for a US based website with a US audience? Are there any best practices or guidelines for striping unnecessary characters from a font for web use?
I would recommend subsetting to one of the common "code page" definitions that support US/Western Europe. Most code page definitions pre-date Unicode and typically have the bits and pieces needed for various regional support without including entire Unicode blocks. Suggestions:
Windows Code Page 1252
ISO/IEC 8859-1 "Latin 1"*
ISO/IEC 8859-15
*This is the same as Unicode Ranges 0020-007F Basic Latin + 00A0-00FF Latin-1 Supplement
These include much more than is strictly required for US English, though as noted above, several accented characters commonly appear in English text (é, ñ, as well as other punctuation marks and symbols). These sets include those characters, so you should be in good shape for the vast majority of text for a U.S. audience. Note also that in most fonts, these characters are typically "composites", which means that they use a reference to the components (e.g. 'é' is built from references to 'e' and '´'); as such, they don't normally require as much size to store them, so retaining them usually won't incur a major size penalty.
If you might encounter European financial text, I'd suggest either Windows 1252 or ISO/IEC 8859-15 which include the Euro currency symbol.
I don't know if there are hidden "gotchas" with stripping down to just the "Basic Latin" range, like accented characters showing as diamond question marks instead of falling back to a system font
Any characters that don't exist in the font you are using will fall back to any default font the browser can find with the characters in. This will likely be ugly when interleaved with other characters from your custom font, but modern OSes provide decent font coverage for commonly-used characters from the above blocks so typically it will still be readable.
So you should include characters based on whether you think they'll be used commonly enough that having them rendered in an ugly font is a deal-breaker. For what it's worth, a pretty minimal set I have used before for a similar purpose is ¡£°±²³¿ÉËÑéëñ‘’“”–—•€™, but your site's exactly requirements may vary. (For example, if you coöpted the New-Yorker-style diaeresis you would certainly want äëïöü.)
(How exactly default fallback fonts work varies between browsers and was famously troublesome in older versions of IE, and IE Mobile. But the basic accented Latin letters are pretty safe.)
I want to use a couple of non-printable ASCII characters to encode special meanings to text generated by an application (under Linux).
Some non-printable ASCII characters are interpreted to have special meanings in a sheer number of applications, such as LF (linefeed), character number 10 in the ASCII table. I am unsure if there are more of these. Basically, I am looking for a character, where the function of which is outdated and safe to use in the modern world.
Thank you in advance.
What is the subset of Unicode characters that are normally used in writing — such as those that would be typically found in a newspaper article?
For example, in English, the characters in the range [a-zA-Z0-9], plus some punctuation characters, would be sufficient for most writing.
But I want to support languages that use characters that fall outside the ASCII range, while excluding the non-printing or decorative characters.
The objective is to restrict the user input to the application to codepoints that are legitimately used in written language. Because the user input will be saved and displayed, I do not want to allow pranksters to input text consisting entirely of things like diacritics, Unicode combining characters, Unicode flow control characters, etc.
Regrettably, I am not fluent in every single language found in Unicode. Has anyone compiled a list of all of the subset of Unicode characters that are normally used in writing?
The official list of Unicode code points is UnicodeData.txt. This is a plain text file with one line per code point; it's easily machine-readable. For example:
0022;QUOTATION MARK;Po;0;ON;;;;;N;;;;;
The third semicolon-delimited field is the abbreviated name of the "General Category". This is explained further in chapter 4 of the Unicode Standard, specifically in section 4.5; see the table on page 131 (page 12 of the PDF file). For example, "Lu" is uppercase letters, "Ll" is lowercase letters, Pc, Pd, Ps, et al are various kinds of punctuation. (The first letter of the two-letter abbreviation represents a higher-level category such as letter, digit, punctuation, etc.)
Note that some ranges of code points are not listed explicitly. For example, the range of CJK (Chinese, Japanese, Korean) ideographs is represented as:
4E00;<CJK Ideograph, First>;Lo;0;L;;;;;N;;;;;
9FCC;<CJK Ideograph, Last>;Lo;0;L;;;;;N;;;;;
I think there are other files on unicode.org that fill in these gaps.
I'm still not 100% clear on just what subset you're trying to define, but you can probably define it as a particular set of General Category values.
I do not want to allow pranksters to input text consisting entirely of things like diacritics, Unicode combining characters
Diacritics/combining characters will be used in normal written language. So if you want to stop 'pranksters' you're going to need something more sophisticated than just a list of permitted characters. You'll have to do some sort of linguistic analysis for every language you want to permit.
I'd recommend not bothering with this, because it's going to be hard and you won't succeed anyway. Just let people write what they want.
Try WGL4 (652 characters), MES-1 (335 characters) or MES-2 (1062 characters). Find these at Wikipedia.
You may wish to exclude characters IJijĸĿŀʼn˚―⅛⅜⅝⅞♪ from MES-1 if you want to use this set.
Edit: I realize this is a bad answer. Especially the removing characters from MES-1 part was total garbage. I shouldn't have posted this. I'm ashamed of whoever upvoted this.
If anything, use Subset1 (678 characters), Subset2 (1193 characters) and Subset3 (2823 characters). https://unicodesubsets.miraheze.org/wiki/User:PiotrGrochowski
Can anybody please tell me what is the range of Unicode printable characters? [e.g. Ascii printable character range is \u0020 - \u007f]
See, http://en.wikipedia.org/wiki/Unicode_control_characters
You might want to look especially at C0 and C1 control character http://en.wikipedia.org/wiki/C0_and_C1_control_codes
The wiki says, the C0 control character is in the range U+0000—U+001F and U+007F (which is the same range as ASCII) and C1 control character is in the range U+0080—U+009F
other than C-control character, Unicode also has hundreds of formatting control characters, e.g. zero-width non-joiner, which makes character spacing closer, or bidirectional text control. This formatting control characters are rather scattered.
More importantly, what are you doing that requires you to know Unicode's non-printable characters? More likely than not, whatever you're trying to do is the wrong approach to solve your problem.
This is an old question, but it is still valid and I think there is more to usefully, but briefly, say on the subject than is covered by existing answers.
Unicode
Unicode defines properties for characters.
One of these properties is "General Category" which has Major classes and subclasses. The Major classes are Letter, Mark, Punctuation, Symbol, Separator, and Other.
By knowing the properties of your characters, you can decide whether you consider them printable in your particular context.
You must always remember that terms like "character" and "printable" are often difficult and have interesting edge-cases.
Programming Language support
Some programming languages assist with this problem.
For example, the Go language has a "unicode" package which provides many useful Unicode-related functions including these two:
func IsGraphic(r rune) bool
IsGraphic reports whether the rune is defined as a Graphic by Unicode. Such
characters include letters, marks, numbers, punctuation, symbols, and spaces,
from categories L, M, N, P, S, Zs.
func IsPrint(r rune) bool
IsPrint reports whether the rune is defined as printable by Go. Such
characters include letters, marks, numbers, punctuation, symbols, and
the ASCII space character, from categories L, M, N, P, S and the ASCII
space character. This categorization is the same as IsGraphic except
that the only spacing character is ASCII space, U+0020.
Notice that it says "defined as printable by Go" not by "defined as printable by Unicode". It is almost as if there are some depths the wizards at Unicode dare not plumb.
Printable
The more you learn about Unicode, the more you realise how unexpectedly diverse and unfathomably weird human writing systems are.
In particular whether a particular "character" is printable is not always obvious.
Is a zero-width space printable? When is a hyphenation point printable? Are there characters whose printability depends on their position in a word or on what characters are adjacent to them? Is a combining-character always printable?
Footnotes
ASCII printable character range is \u0020 - \u007f
No it isn't. \u007f is DEL which is not normally considered a printable character. It is, for example, associated with the keyboard key labelled "DEL" whose earliest purpose was to command the deletion of a character from some medium (display, file etc).
In fact many 8-bit character sets have many non-consecutive ranges which are non-printable. See for example C0 and C1 controls.
First, you should remove the word 'UTF8' in your question, it's not pertinent (UTF8 is just one of the encodings of Unicode, it's something orthogonal to your question).
Second: the meaning of "printable/non printable" is less clear in Unicode. Perhaps you mean a "graphical character" ; and one can even dispute if a space is printable/graphical. The non-graphical characters would consist, basically, of control characters: the range 0x00-0x0f plus some others that are scattered.
Anyway, the vast majority of Unicode characters (more than 200.000) are "graphical". But this certainly does not imply that they are printable in your environment.
It seems to me a bad idea, if you intend to generate a "random printable" unicode string, to try to include all "printable" characters.
What you should do is pick a font, and then generate a list of which Unicode characters have glyphs defined for your font. You can use a font library like freetype to test glyphs (test for FT_Get_Char_Index(...) != 0).
Taking the opposite approach to #HoldOffHunger, it might be easier to list the ranges of non-printable characters, and use not to test if a character is printable.
In the style of Regex (so if you wanted printable characters, place a ^):
[\u0000-\u0008\u000B-\u001F\u007F-\u009F\u2000-\u200F\u2028-\u202F\u205F-\u206F\u3000\uFEFF]
Which accounts for things like separator spaces and joiners
Note that unlike their answer which is a whitelist that ignores all non-latin languages, this blacklist wont permit non-printable characters just because they're in blocks with printable characters (their answer wholly includes Non-Latin, Language Supplement blocks as 'printable', even though it contains things like 'zero-width non-joiner'..).
Be aware though, that if using this or any other solution, for sanitation for example, you may want to do something more nuanced than a blanket replace.
Arguably in that case, non-breaking spaces should change to space, not be removed, and invisible separator should be replaced with comma conditionally.
Then there's invalid character ranges, either [yet] unused or reserved for encoding purposes, and language-specific variation selectors..
NB when using regular expressions, that you enable unicode awareness if it isn't that way by default (for javascript it's via /.../u).
You can tell if you have it correct by attempting to create the regular expression with some multi-byte character ranges.
For example, the above, plus the invalid character range \u{E0100}-\u{E01EF} in javascript:
/[\u0000-\u0008\u000B-\u001F\u007F-\u009F\u2000-\u200F\u2028-\u202F\u205F-\u206F\u3000\uFEFF\u{E0100}-\u{E01EF}]/u
Without u \u{E0100}-\u{E01EF} equates to \uDB40(\uDD00-\uDB40)\uDDEF, not (\uDB40\uDD00)-(\uDB40\uDDEF), and if replacing you should always enable u even when not including multbyte unicode in the regex itself as you might break surrogate pairs that exist in the text.
What characters are valid?
At present, Unicode is defined as starting from U+0000 and ending at U+10FFFF. The first block, Basic Latin, spans U+0000 to U+007F and the last block, Supplementary Private Use Area-B, spans U+100000 to 10FFFF. If you want to see all of these blocks, see here: Wikipedia.org: Unicode Block; List of Blocks.
Let's break down what's valid/invalid in the Latin Block1.
The Latin Block: TLDR
If you're interested in filtering out either invisible characters, you'll want to filter out:
U+0000 to U+0008: Control
U+000E to U+001F: Device (i.e., Control)
U+007F: Delete (Control)
U+008D to U+009F: Device (i.e., Control)
The Latin Block: Full Ranges
Here's the Latin block, broken up into smaller sections...
U+0000 to U+0008: Control
U+0009 to U+000C: Space
U+000E to U+001F: Device (i.e., Control)
U+0020: Space
U+0021 to U+002F: Symbols
U+0030 to U+0039: Numbers
U+003A to U+0040: Symbols
U+0041 to U+005A: Uppercase Letters
U+005B to U+0060: Symbols
U+0061 to U+007A: Lowercase Letters
U+007B to U+007E: Symbols
U+007F: Delete (Control)
U+0080 to U+008C: Latin1-Supplement symbols.
U+008D to U+009F: Device (i.e., Control)
U+00A0: Non-breaking space. (i.e., )
U+00A1 to U+00BF: Symbols.
U+00C0 to U+00FF: Accented characters.
The Other Blocks
Unicode is famous for supporting non-Latin character sets, so what are these other blocks? This is just a broad overview, see the wikipedia.org page for the full, complete list.
Latin1 & Latin1-Related Blocks
U+0000 to U+007F : Basic Latin
U+0080 to U+00FF : Latin-1 Supplement
U+0100 to U+017F : Latin Extended-A
U+0180 to U+024F : Latin Extended-B
Combinable blocks
U+0250 to U+036F: 3 Blocks.
Non-Latin, Language blocks
U+0370 to U+1C7F: 55 Blocks.
Non-Latin, Language Supplement blocks
U+1C80 to U+209F: 11 Blocks.
Symbol blocks
U+20A0 to U+2BFF: 22 Blocks.
Ancient Language blocks
U+2C00 to U+2C5F: 1 Block (Glagolitic).
Language Extensions blocks
U+2C60 to U+FFEF: 66 Blocks.
Special blocks
U+FFF0 to U+FFFF: 1 Block (Specials).
One approach is to render each character to a texture and manually check if it is visible. This solution excludes spaces.
I've written such a program and used it to determine there are roughly 467241 printable characters within the first 471859 code points. I've selected this number because it covers all of the first 4 Planes of Unicode, which seem to contain all printable characters. See https://en.wikipedia.org/wiki/Plane_(Unicode)
I would much like to refine my program to produce the list of ranges, but for now here's what I am working with for anyone who needs immediate answers:
https://editor.p5js.org/SamyBencherif/sketches/_OE8Y3kS9
I am posting this tool because I think this question attracts a lot of people who are looking for slightly different applications of knowing printable ranges. Hopefully this is useful, even though it does not fully answer the question.
The printable Unicode character range, excluding the hex, is 32 to 126 in the int datatype.
Unicode, stict term, has no range. Numbers can go infinite.
What you gave is not UTF8 which has 1 byte for ASCII characters.
As for the range, I believe there is no range of printable characters. It always evolves. Check the page I gave above.
how can i extract only the characters in a particular language from a file containing language characters, alphanumeric character english alphabets
This depends on a few factors:
Is the string encoded with UTF-8?
Do you want all non-English characters, including things like symbols and punctuation marks, or only non-symbol characters from written languages?
Do you want to capture characters that are non-English or non-Latin? What I mean is, would you want characters like é and ç or would you only want characters outside of Romantic and Germanic alphabets?
and finally,
What programming language are you wanting to do this in?
Assuming that you are using UTF-8, you don't want basic punctuation but are okay with other symbols, and that you don't want any standard Latin characters but would be okay with accented characters and the like, you could use a string regular expression function in whatever language you are using that searches for all non-Ascii characters. This would elimnate most of what you probably are trying to weed out.
In php it would be:
$string2 = preg_replace('/[^(\x00-\x7F)]*/','', $string1);
However, this would remove line endings, which you may or may not want.