In my model I want to be able to clump my agents but have the location of this clumping to change.
At the moment I can get them to clump using
setxy random 4 random 4
but that is located around the origin of the simulation space. How can I vary this so they clump at a different point for each model run?
Thanks
I like using asking patches to do this sort of thing but you could just change your code to.
The set the clump by hand method
let clump-X random-pxcor
let clump-Y random-pycor
crt 100 ;; or however many you want to make the create-turtles in your code
[
...
setxy (random 4 + clump-X) (random 4 + clump-Y)
]
The patch and sprout method
ask one-of patches
[
sprout 100
[
set xcor xcor + random 4
set ycor ycor + random 4
]
]
Related
I´m setting up some turtles randomly on the the map, then they have to change the color of the patches to show that they cultivated however some times they overlap and change the color of other turtles. To solve this i asked not any? other turtles in-radius 6 to force them to be apart, but this is not elegant nor efficient. What would be a better way to give each turtle their own patch to make a more populated world.
to setup
ca
resize-world 0 100 0 100
create-turtles 50
[ set size 1
set color 135
setxy random-xcor random-ycor
move-to one-of patches with [not any? other turtles in-radius 6]
ask patches in-radius (2 + random 2) [set pcolor 35]
]
end
to go
ask turtles[ ask patches in-radius 4 with [pcolor = 35]; falta representar las cosechas 4-2-3-3
[ set pcolor 42]]
end
The go is using the fact that there are no turtles in a radius of 6, but if i wanted to get them closer or change the color on different ticks this would be bad.
Thanks. If more is need please let me know.
You can give the turtles a new turtles-variable that you can assign a patch-set to. This is done by using turtles-own at the start of your program.
The turtle then remembers which patches were assigned to this variable and can access them again at a later time. This way, when it comes time to change patch colors, they only change the colors of patches within their original radius and not of the patches in the extended radius.
turtles-own [territory]
to setup
ca
resize-world 0 100 0 100
create-turtles 50
[ set size 1
set color 135
setxy random-xcor random-ycor
set territory patches in-radius (2 + random 2)
ask territory [set pcolor 35]
]
end
to go
ask turtles [ ask territory ; falta representar las cosechas 4-2-3-3
[ set pcolor 42]]
end
As an alternative solution, here it is not the turtles that remember which patch they own, but the patches that remember which turtle owns them. In the case I use here, patches can only be owned by a single turtle.
Here, I give each patch a patch-variable using patches-own. I then let the turtles tell the patches within their radius to choose that turtle as their owner ask patches ... [set owner myself]. Myself is a reporter that refers not to the patch carrying out the command, but to the turtle that asked the patch to carry out the command.
patches-own [owner]
to setup
ca
resize-world 0 100 0 100
create-turtles 50 [
set size 1
set color 135
setxy random-xcor random-ycor
ask patches in-radius (2 + random 2) [
set owner myself
set pcolor 35
]
]
end
to go
ask turtles [ ask patches in-radius 4 with [owner = myself] ; falta representar las cosechas 4-2-3-3
[ set pcolor 42]
]
end
If multiple turtles try to be the owner of the same patch, the last one becomes the owner. This is because each turtle completely overwrites the previous owner value.
If you still want an option for multiple owners, you can work with a turtle-set instead. This requires a few different primitives.
In setup, you have to define owners as an empty turtle-set in order for the rest to work, using set owners (turtle-set).
To then assign a turtle to owners, you use set owners (turtle-set owners myself). This changes the owners turtle-set to add the turtle calling the patch to the set.
Finally, you can no longer ask patches to with [owner = myself] to change color since owners is now a turtle-set, not a turtle. Instead, you use the member? primitive that looks if a turtle is part of a turtle-set.
patches-own [owners]
to setup
ca
resize-world 0 100 0 100
ask patches [set owners (turtle-set)]
create-turtles 50 [
set size 1
set color 135
setxy random-xcor random-ycor
ask patches in-radius (2 + random 2) [
set owners (turtle-set owners myself)
set pcolor 35
]
]
end
to go
ask turtles [
ask patches in-radius 4 with [member? myself owners] ; falta representar las cosechas 4-2-3-3
[ set pcolor 42]
]
end
im trying to show a cultivation process. At setup im creating the farmers and giving them a random farm size (with the splotch) then, at go, im telling them that if they have enought money all patches near them that are the splotch turn into green, representing cultivation. But its just changing one pixel and not all round it. It most be someting small but i cant see it. Thanks in advance for the help
.
breed [cercas cerca]
breed [medios medio]
breed [lejos lejo]
patches-own[calidad
cercanialago
cultivado
]
turtles-own [ingresos
gastos]
create-cercas 10 + random 10
[ set size 1 ;; easier to see
set color 135
setxy random xcor random ycor
move-to one-of patches with [not any? other turtles in-radius 3 and pcolor = 57]
set heading random 45 + 45
set ingresos 1000000 + random 6000000
]
ask turtles
[ ask patches in-radius (1 + random 3)
[ set pcolor 35 ] ]
to go
ask cercas [
ifelse ingresos > 2000000 [if any? patches in-radius 4 with [pcolor = 35] [if ticks mod 3 = 0 [set pcolor 62] ]]
[]
] ```
Your cercas are a breed of turtles.
A useful feature of NetLogo is that any turtle can directly read and modify the variables of the patch it is on (i.e. without the need to invoke such patch).
So when you ask a turtle to set pcolor 62, it will automatically refer to pcolor of the patch it is on.
If we eliminate all of the conditions from your last block of commands, we have:
ask cercas [set pcolor 62]. This is what you are asking cercas to do: simply changing the pcolor of the patch they are on.
The fact that you use patches in-radius 4 in the condition for the first if statement does not influence the ask cercas [set pcolor 62] part. The condition is one thing, the command to be executed if the condition holds true is a separate thing.
Therefore you should make cercas ask patches in-radius 4 to change their pcolors.
I'm new to NetLogo and I'm unsure of how to place 300 spartans in a narrow row. Let's say an area of 2x5 patches, turtles overlapping one another. I have tried using sprout, this achieved the specific coordinate requirements but the turtles are only one per patch.. Here is some code I have.
ask patches with [pxcor > 0 and pycor > -2 and pycor < 2]
[ sprout 1 [ set color red ] ]
or
to setup-spartans
create-spartans 300
set-default-shape turtles "person"
ask spartans
[ setxy random-xcor -3 ;; makes only a single row and goes across entire screen
;; (I need it to be in a specific area)
set heading 180
set color red ]
end
How about something like this?
create-spartans 300 [
set xcor -2 + random-float 5
set ycor -1 + random-float 2
]
I want to create 4 turtles on fixed pycor (like pycor = 10) and even spacing xcor over that pycor; and also I want to make the headings of each turtles separate from other. The display is like
............. O ............. O .............. O ........... O ............
(heading 45) (heading 90) (heading 230) (heading 180)
O is the turtle here. My code is as below.
ask n-of 4 patches with [ pcolor = 18 and pycor = 10 ] [
sprout-turtles 1 [
set shape "default"
set color blue
set size 2
set heading one-of [90 270]
]
]
With this code turtles are created but many time with same heading, sometimes on same patch, sometimes neighboring patch as shown below
..........OOO...................O or .........OO..........O.........O...
but this i don't want. Should i have to use Create turtles four times separately specifying xcor, ycor and heading? Actually i don't want to use it four times. Please any suggestion and help? Thanks a lot.
Since the only thing you are taking from the patch to the turtle, you may as well just use create-turtles instead of sprout-turtles and then put them where you want. Typically, sprout is used when the particular patch meets relevant conditions - such as having lots of resources. Also, since you want specific values, using one-of or n-of will not work because they randomly select.
Instead you want something more like this (not tested):
let gap 15 ; spacing between turtles
let directions [45 90 230 180] ; heading values
let ii 0 ; counter / index
repeat 4
[ create-turtles 1
[ setxy (0 + ii * gap) 10
set shape "default"
set color blue
set size 2
set heading item ii directions
]
set ii ii + 1
]
On Netlogo, I want to create turtles and setxy to random-xcor and random-ycor but only on the green area that takes up the screen from under the ycor of 1.
If your main goal is to start turtles on a random place in the green area, you can do:
create-turtles 100 [ move-to one-of patches with [ pcolor = green ] ]
one-of patches with [ pcolor = green ] just gets a random green patch. Then, the code moves the newly created turtle to that randomly selected patch. Note that the turtles will be create on the center of the patches with this method. I recommend using this approach.
If your goal really is to set it to a random position with a maximum ycor of 1, let's first define a function that gives us a random number from between two numbers
to-report random-between [ min-num max-num ]
report random-float (max-num - min-num) + min-num
end
Now, random-ycor then does the same thing random-between (min-pycor - .5) (max-pycor + .5). The .5s are there so that the number can be at the very top or very bottom. You can use the same technique, but just replace the max-num with 1:
create-turtles 100 [ setxy random-xcor random-between (min-pycor - .5) 1 ]