I am using Crystal reports in my WPF application to generate reports, getting below error
"the system cannot find the path specified error" on ExportToDisk.
irptDocument = new ReportDocument();
rptDocument.InitReport += new EventHandler(this.OnReportDocInit);
irptDocument.Load(astrReportName);
irptDocument.SetDataSource(adtbResult);
irptDocument.ExportToDisk(ExportFormatType.PortableDocFormat,lstrReportFullName);
Path where to save as pdf is a valid path, still I am getting above error.
This is very common error while we something missing or not set (even for runtime). If you getting error in win7, then also check second link.
While searching answers of your question, someone resolved this error by
I found out the problem; the auto-generated file name seems to have
been too long for the app-server. I changes the name of the class to
PCWS and it worked fine. It's a shame Sun One Studio (which creates
these massive file names doesn't warn you
Please check this links :
https://scn.sap.com/thread/3689925
http://answers.microsoft.com/en-us/windows/forum/windows_7-update/the-system-cannot-find-the-path-specified-error/dae5f759-b053-4a4a-87af-42e79f517631?auth=1
Related
I have problems translating Modelica models with Dymola 2020: When I try to translate the models, the following error message appears:
"unknown internal error in Dymola".
The model was translating and simulating a couple of days ago, and the same model still runs on the computer of other colleagues. I didn't change the compiler in between nor the Dymola version. I've also restarted the computer but the problem persists.
Also, other models are still translating, so not all models are affected by this error.
Does anyone have a clue how to debug this error? Thank you very much for all hints!
The most likely explanation would be some weird setting of some flag.
You can see if you have any odd settings of normal flags by:
Dymola 2020: Edit>Options>General>Flags... Check "Non-default"
Dymola 2020x: Tools>Options>General>Flags... Check "Non-default"
(If it is a non-Boolean setting it is a bit messier.)
That is assuming it is really the same model and there is no difference in any model in the path (including working directory).
Frankly speaking, if you get "unknown internal error in Dymola" you should report it to technical support at Dassault Systèmes (through your reseller), and let them debug it.
It is not your job to debug such errors.
Have you tried to delete the content from the working directory (WD)?
Sometimes there are artifacts, which mess up the compilation of a specific model.
You can check where it is, using the
GUI, File -> Working Directory -> Copy Path and paste it in the Explorer
Command line typing cd, which returns the path to the WD
Then make sure that there are no important files in the WD (usually .mo files) and finally delete the full content of the directory.
Note: You should ensure that the WD is a local path (otherwise performance can take a serious hit). Besides that it is usually a good idea to have the WD separated form the directory where models are stored.
What might cause
new Font(Font.HELVETICA, 11f, Font.BOLD)
or
BaseFont.createFont(BaseFont.HELVETICA, 'Cp1252', BaseFont.NOT_EMBEDDED)
to start returning the following??
com.itextpdf.text.DocumentException: No message found for 1.not.found.as.resource
itext 5.5.6 jar on Max OSX 10.10
It seems that you are not using the "pre-canned" jar, but that you have created your own jar. That self-made jar only contains the Java class files. It misses resources such as the language (.lng) and the Adobe Font Metrics (.afm) files.
If the above assumption is wrong, then at least this is right:
Instead of the actual error message, you get the key to an error message that is stored in a .lng file: 1.not.found.as.resource. This key is used to find the actual error message in the language of your OS (English, Dutch and Portuguese are supported; the default is English).
The actual error message (should en.lng be found) would have been: "Helvetica not found as a resource" (the 1 in 1.not.found.as.resource is a placeholder). This message tells you that the file Helvetica.afm can't be found. This file contains the metrics of every glyph in the font Helvetica (regular). Without those metrics, you can't create a proper PDF.
This explains what happens. Your question doesn't contain sufficient information to explain why it happens. All of this shouldn't be a problem when using the correct jar with a JDK that knows how to read resources from a jar. The fact that you write "What might cause ... to start returning the following" indicates that it has worked for you before. Think of what you have changed between the last time it worked and the first time it stopped working (e.g. changing the OS, changing the JVM,...). That will probably be the culprit.
I'm trying to embed Jasper Reports into APEX App. I'm able to gather reports from samples (samples on JasperCommunity website), however, when I'm trying to get created by me and colleagues reports - every time I have the same error:
JSON schema validation failed: resource: String does not match pattern: ^/[^/~!#\$%^|\s#&*()\-+={}\[\]:;"'<>,?/\|\\]+(/[^/~!#\$%^|\s#&()-+={}[]:;"'<>,?/\|\]+)$.
In other words I can't get any of our reports apart from the samples (e.g. /public/Samples/Reports/03._Store_Segment_Performance_Report"). I think the case is that the path to the Report is wrong, but I've tried all possible and impossible options and none of them works. Anyone any ideas please ?! Thanks
P.S. APEX 4.2.6, JasperServer 6.0. And finally, I can get samples Reports ONLY under the JasperAdmin user, simple User always got an error - 'Access Denied'. Why ?!?!?!
Sorted.
If anyone interested - when specify the actual path, in Jasper: right click on Report(or Dashboard, AdHocView etc.) and copy the path from it. As it differs from when you point mouse on it (e.g. adding the underscores etc.), and paste this actual path into your javascript code into HTML section in your web app. Thanks
While using tAccessInput component in my job, it showing error like,
It may not be a database that your application recognizes, or the file may be corrupt.
But, it all the connections and database/table names are valid in my job.
What can be the problem. and how can i resolve it.
Metioning the exact DBVersion is more important for tAccessInput/tAccessOutput.
Like Access 2003/Access 2007 and associated database file name.
ActiveReports seems like a powerful flexible tool, but if you make a mistake anywhere, you get an exception "data member not found. please check your datasource and datamember properties".
There is no indication as to which datasource/datamember is at fault or what subreport the problem lies in, but Active Reports must know this!
The stack trace is no use, as the error is thrown after the report.run() method is invoked from deep within code generated by Active Reports itself.
Does anybody have a solution other than commenting out one subreport after another and checking all fields in turn?
I was getting the same error while trying to pass a raw dataset to a report as below:
...
Dim rpt as New ActiveReport
With rpt
.DataSource = _data
.Run()
End With
...
I specified a table in the dataset and the error went away.
...
.DataSource = _data.Tables(0)
...
`
Unfortunately I don't know a way to immediately tell which subreport that error is coming from. Indeed, that error message should be improved when you're using subreports. I will report it to the ActiveReports development team.