I am getting the following error while doing baseline index of my Endeca application in ATG
15:26:47,891 ERROR [nucleusNamespace.atg.dynamo.security.opss.csf.CredentialStoreManager] (Thread-201) Unable to process any CSF calls as the Credential Store server i
s not enabled. Please check log for more details
15:26:47,913 INFO [nucleusNamespace.atg.commerce.search.StoreLocationOutputConfig] (Thread-201) Starting bulk load
15:26:47,915 INFO [nucleusNamespace.atg.commerce.endeca.index.CategoryToDimensionOutputConfig] (index-/atg/commerce/endeca/index/ProductCatalogSimpleIndexingAdmin) Fa
iled to cancel incremental load of /atg/commerce/endeca/index/CategoryToDimensionOutputConfig, probably because no bulk load was running.
15:26:47,916 INFO [nucleusNamespace.atg.endeca.index.ConfigImportDocumentSubmitter] (Thread-203) Opening configuration repository connection for application logistore
15:26:47,917 ERROR [nucleusNamespace.atg.dynamo.security.opss.csf.CredentialStoreManager] (Thread-203) Unable to process any CSF calls as the Credential Store server i
s not enabled. Please check log for more details
15:26:47,916 INFO [nucleusNamespace.atg.commerce.search.ProductCatalogOutputConfig] (index-/atg/commerce/endeca/index/ProductCatalogSimpleIndexingAdmin) Failed to can
cel incremental load of /atg/commerce/search/ProductCatalogOutputConfig, probably because no bulk load was running.
15:26:47,917 INFO [nucleusNamespace.atg.commerce.search.StoreLocationOutputConfig] (index-/atg/commerce/endeca/index/ProductCatalogSimpleIndexingAdmin) Failed to canc
el incremental load of /atg/commerce/search/StoreLocationOutputConfig, probably because no bulk load was running.
15:26:47,919 INFO [nucleusNamespace.atg.endeca.index.ConfigImportDocumentSubmitter] (Thread-199) Opening configuration repository connection for application logistore
15:26:47,919 ERROR [nucleusNamespace.atg.dynamo.security.opss.csf.CredentialStoreManager] (Thread-199) Unable to process any CSF calls as the Credential Store server i
s not enabled. Please check log for more details
15:26:47,919 INFO [nucleusNamespace.atg.commerce.endeca.index.ProductCatalogSimpleIndexingAdmin] (Thread-203) Indexing process cancelled, Endeca says: Could not retri
eve workbench credential properties from credential store.
15:26:47,919 INFO [nucleusNamespace.atg.endeca.index.ConfigImportDocumentSubmitter] (Thread-207) Opening configuration repository connection for application logistore
15:26:47,920 ERROR [nucleusNamespace.atg.dynamo.security.opss.csf.CredentialStoreManager] (Thread-207) Unable to process any CSF calls as the Credential Store server i
s not enabled. Please check log for more details
15:26:47,921 INFO [nucleusNamespace.atg.commerce.endeca.index.ProductCatalogSimpleIndexingAdmin] (Thread-207) Indexing process cancelled, Endeca says: Could not retri
eve workbench credential properties from credential store.
After doing extensive research I found that C:\ATG\ATG11.2\home\servers\atg_production_lockserver\localconfig\atg\dynamo\server\OPSSInitializer.properties has path for jps-config.xml ie
JPSConfigurationLocation=C:/ATG/ATG11.2/home/../home/security/jps-config.xml
This jps-config.xml has some CSF related configuration.
How can I get rid of this error for successful baseline indexing.
I am stuck on this part.
This happens if you change the default workbench password. Simple solution would be, change Endeca experience manager password back to admin and try.
Otherwise, password needs to be changed in multiple places.
Thanks,
Ajay Agrawal
Go to the OPSSInitializer component in dyn admin and check whether the path for jps-config.xml specified is correct there. If not, correct the path.
Related
I have integrated authentication jbpm with LDAP. But, When start process instance. I cannot create user task.
Here is log server, can anyone can help?
2021-05-14 17:18:39,683 ERROR [org.jbpm.services.task.wih.LocalHTWorkItemHandler] (default task-10) Fri May 14 17:18:39 ICT 2021: Error when creating task on task server for work item id 5. Error reported by task server: There are no known Business Administrators, task cannot be created according to WS-HT specification: org.jbpm.services.task.exception.CannotAddTaskException: There are no known Business Administrators, task cannot be created according to WS-HT specification
at org.jbpm.services.task.commands.UserGroupCallbackTaskCommand.doCallbackOperationForPeopleAssignments(UserGroupCallbackTaskCommand.java:298)
at org.jbpm.services.task.commands.AddTaskCommand.execute(AddTaskCommand.java:109)
at org.jbpm.services.task.commands.AddTaskCommand.execute(AddTaskCommand.java:53)
at org.jbpm.services.task.commands.TaskCommandExecutorImpl$SelfExecutionCommandService.execute(TaskCommandExecutorImpl.java:80)
at org.jbpm.services.task.commands.TaskCommandExecutorImpl$SelfExecutionCommandService.execute(TaskCommandExecutorImpl.java:65)
You need to create an "admin" group, for example
cn=admin,ou=Roles,dc=jbpm,dc=org
You may take a look at "LDAP structure" chapter and source code:
https://blog.kie.org/2021/02/migrating-jbpm-images-secured-by-ldap-to-elytron.html
I am trying to create a REST API with wso2 API_Manager to gather data from a Postgres database (learning purpose). I struggle doing so and I would like to know whether:
I did not understand wso2 components' roles properly (new techno and subject for me)
or there is an error in the way I configured the manager.
System setup
I used this official docker image, added postgres jdbc jar in /repository/components/lib/ and added the following in /repository/conf/datasources/master-datasources.xml:
<datasource>
<name>s0m3dAtabas3</name>
<description>The db used for testing purposes</description>
<definition type="RDBMS">
<configuration>
<url>jdbc:postgresql://sandor_postgres:5432/s0m3dAtabas3</url>
<driverClassName>org.postgresql.Driver</driverClassName>
<username>s0m3us3rfr0mdAtAMaj0r</username>
<password>N0t5uchAs1mple1</password>
<maxActive>80</maxActive>
<minIdle>5</minIdle>
<maxWait>60000</maxWait>
<defaultAutoCommit>false</defaultAutoCommit>
<testOnBorrow>true</testOnBorrow>
<validationInterval>30000</validationInterval>
</configuration>
</definition>
</datasource>
I made sure than the postgres' container named sandor_postgres is accessible from wso2's with these credentials. In this database, I have a table called something. The image comes with the following UIs:
admin
publisher
store
Graphical API creation
I first followed the WorldBank tutorial which seemed crystal clear (though I am not quite sure where the data came from). I then tried to adapt it.
Step 1: Design
I used the database name as context (s0m3dAtabas3) v.1.0.0. Since the table is called something, the url pattern I end up with is /s0m3dAtabas3/1.0.0/something
Step 2: Implement
This is where things start to be confusing. No matter the resource path I use in the Endpoint (end point type REST), I get a 404 and the logs are not very helpful
http://192.168.8.111:8280 -> 404
http://192.168.8.111:8280/something -> 404
http://192.168.8.111:9443/tried_several -> Invalid - Error connecting to backend
http://192.168.8.111:8243/tried_several -> Invalid - Error connecting to backend
INFO - InboundDBSyncRequestEvent Running DB sync task.
INFO - LogMediator STATUS = Message dispatched to the main sequence. Invalid URL., RESOURCE = /s0m3dAtabas3/1.0.0
INFO - CarbonAuthenticationUtil 'admin#carbon.super [-1234]' logged in at [2019-10-29 11:42:31,030+0000]
INFO - CarbonAuthenticationUtil 'admin#carbon.super [-1234]' logged in at [2019-10-29 11:42:31,197+0000]
INFO - LogMediator STATUS = Message dispatched to the main sequence. Invalid URL., RESOURCE = /s0m3dAtabas3/bullshit
INFO - CarbonAuthenticationUtil 'admin#carbon.super [-1234]' logged in at [2019-10-29 11:48:30,649+0000]
INFO - CarbonAuthenticationUtil 'admin#carbon.super [-1234]' logged in at [2019-10-29 11:48:30,790+0000]
INFO - LogMediator STATUS = Message dispatched to the main sequence. Invalid URL., RESOURCE = /
INFO - InboundDBSyncRequestEvent Running DB sync task.
INFO - LogMediator STATUS = Message dispatched to the main sequence. Invalid URL., RESOURCE = /
Did I miss some important configuration step or wso2 API Manager is not the standalone component I thought it was and requires another component to achieve what I am looking for?
It seems there is a misunderstanding in the concept-wise.
Here is the basic idea of a typical API Management solution.
You have a web service (REST, SOAP, etc...) which you need to expose as a managed API. Now, you can front your service with API Manager and expose it as a managed API with security, rate limiting, managed life cycle etc.
In your case, it seems you don't have such a service, but only have a database table. So, before using API Manager to front your service, you first need to expose your table as a service. For that purpose, I'd suggest you use the data service component of WSO2 EI 7.0.0. See [1] for how to do that. Once you have your service ready, you can use API Manager to expose it as a managed API.
[1] https://ei.docs.wso2.com/en/latest/micro-integrator/use-cases/tutorials/sending-a-simple-message-to-a-datasource/
I do not see new user info (or updates to user profiles) being synched to/from Publish-Author.
When I create a new user on Publish, I can see that there is a “SimpleDistributionAgent” on Author.. but I cannot find the user in Author(searched entire crx).
I did all the osgi configs as detailed here:
https://docs.adobe.com/docs/en/aem/6-2/administer/security/security/sync.html
I do not see any error in the log…
Publish error.log
09.03.2017 14:27:41.711 *INFO* [127.0.0.1 [1489091261702] POST /libs/sling/distribution/services/exporters/socialpubsync-reverse HTTP/1.1] org.apache.sling.distribution.servlet.DistributionPackageExporterServlet Processed distribution export request in 8 ms: : fetched 1
09.03.2017 14:27:41.841 *INFO* [127.0.0.1 [1489091261793] POST /libs/sling/distribution/services/exporters/socialpubsync-reverse HTTP/1.1]
org.apache.sling.distribution.agent.impl.SimpleDistributionAgent [agent][socialpubsync-reverse] exported package distrpackage_1489091245609_7459cd18-91d9-404c-bb08-a296dd5d4aa4 with info DistributionPackageInfo{ request.type=ADD,
request.paths=[/home/users/C/C3Pz6GaEbUDD5-rdYr7Z/profile]} from queue default by exporter socialpubsync-reverse
Author error.log
09.03.2017 14:27:41.740 *INFO* [sling-default-19-scheduledEventTriggerorg.apache.sling.distribution.agent.impl.SimpleDistributionAgent$AgentBasedRequestHandler#7971f913]
org.apache.jackrabbit.vault.packaging.impl.JcrPackageDefinitionImpl unwrapping package sling/distribution:socialpubsync-vlt_1489091245573_674d4c01-853e-4c53-8828-31f63dda85d2:0.0.1
09.03.2017 14:27:41.801 *INFO* [sling-threadpool-70fe0a04-9496-4992-803d-ea75f39514ae-(apache-sling-job-thread-pool)-3-org_apache_sling_distribution_queue_socialpubsync_endpoint0(org/apache/sling/distribution/queue/socialpubsync/endpoint0)]
org.apache.sling.distribution.agent.impl.SimpleDistributionAgent [agent][socialpubsync] [endpoint0] PACKAGE-DELIVERED DSTRQ45:
ADD paths=[/home/users/C/C3Pz6GaEbUDD5-rdYr7Z/profile], importTime=6ms, execTime=879ms, size=5058B
No errors in Author and Publish Sync diagnostics
What am I missing?
User synchronization will not create users on Author. The sync is only between Publishers.
As of AEM 6.1, when user synchronization is enabled, user data is automatically synchronized across the publish instances in the farm and are not created on author.
https://docs.adobe.com/docs/en/aem/6-2/administer/security/security/sync.html
With the above setup, i started up 2 publish instances (4503, 4504) and when i create or update any user (or profile), the data is synched between both Publish instances.
I have installed Oracle ATG v11 with the commerce reference store, when I startup the production server and go to the url domain/crs/storeus I see the blank white page, and have the following error in the console:
Oct 13, 2014 1:56:37 PM com.endeca.infront.site.SiteManager getSite
SEVERE: Unable to retrieve site definition for site id: /storeSiteUS
com.endeca.store.exceptions.PathNotFoundException: No node found at
path: [pages].
at com.endeca.store.configuration.InternalNode.getNode(InternalNode.java:153)
at com.endeca.store.configuration.InternalNode.getNodeInfo(InternalNode.java:221)
at com.endeca.store.configuration.InternalNode.getNode(InternalNode.java:150)
at com.endeca.store.configuration.InternalNode.getNode(InternalNode.java:61)
........................................
**** Error Mon Oct 13 13:00:47 +00:00 2014 1413205247448 /atg/endeca/assembler/droplet/InvokeAssembler A problem occurred
assembling the content for content item /content/Web/Home Pages. The
response received was {#type=ContentSlot,
atg:currentSiteProductionURL=/crs/storeus,
canonicalLink=com.endeca.infront.cartridge.model.NavigationAction#2b35e9c6,
ruleLimit=1, #error=com.endeca.infront.content.ContentException:
com.endeca.navigation.ENEConnectionException: Error establishing
connection to retrieve Navigation Engine request
http://localhost:15000/graph?node=0&profiles=sitegroup.siteGroupUS|NoPriceRange|site.storeSiteUS&offset=0&nbins=0&irversion=640'.
Tried all: '2' addresses, but could not connect over HTTP to server:
'localhost', port: '15000' Check MDEX Logs and specified query
parameters. , contentCollection=/content/Web/Home Pages}. Servicing
the error open parameter.
I am assuming this error is related to endeca? I have downloaded CAS, Tools And Frameworks with experience manager and MDX, and Platform Services. Do I need to start these or have I missed a part of the endeca install?
The value of the configurationPath attribute in the DefaultFileStoreFactory.properties located at \localconfig\atg\endeca\assembler\cartridge\manager may be incorrect.
In OOTB CRS, we normally provide the following value for configurationPath attribute :
/ToolsAndFrameworks/11.1.0/server/workspace/state/repository/CRS
Could you please verify the .zip is present at path provided in DefaultFileStoreFactory.properties.
Just check if you are able to connect the below url:
host:15000/admin?op=stats
If you are able to connect this URL, then MDEX is running. Also, you can login to the experience manager and check if the dgraphs and dgidx are running.
If you are not able to connect then check all the services are(tools and http) running and accessible. You can check the endeca logs to debug further.
Your DGraph is not (yet) started.
(Hit this URL in your browser and verify: http://localhost:15000/graph?node=0&profiles=sitegroup.siteGroupUS|NoPriceRange|site.storeSiteUS&offset=0&nbins=0&irversion=640&format=xml)
Possible reasons are:
You did not run baseline update from ATG (from
ProductCatalogSimpleIndexingAdmin dyn/admin component).
You did not run promote content (from your Endeca App's control folder).
Your Services are not working properly (or not started at all). Check that Platform Services and Tools And Frameworks are started.
The solution is to properly define the value for the property configurationPath=E:/Endeca/Apps/CRS/data/workbench/application_export_archive/CRS in "DefaultFileStoreFactory.properties"
If you are using the OS as Windows then define this path as Unix style as shown above.
On starting jboss I am getting the following error :
--- MBEANS THAT ARE THE ROOT CAUSE OF THE PROBLEM ---
ObjectName: jboss.jca:service=DataSourceBinding,name=DefaultDS
State: NOTYETINSTALLED
Depends On Me:
jboss.ejb:service=EJBTimerService,persistencePolicy=database
jboss:service=KeyGeneratorFactory,type=HiLo
jboss.mq:service=StateManager
jboss.mq:service=PersistenceManager
And for all database connections in the servlet I get the following exception :
org.postgresql.util.PSQLException: FATAL: password a
uthentication failed for user "poll"
It was working fine and all of a sudden I started getting these errors. My password is correct. I even tried changing the password and then tried again it showed the same exception. What is happening here?
The DefaultDS data source is what the name suggests; the default datasource. It ships with JBoss and is configured to use the Hypersonic (ie in-memory) database. JBoss uses the DefaultDS datasource to read/write internal queues, timed events, etc
Check the file ../conf/standardjbosscmp-jdbc.xml to see what you've got configured for the DefaultDS datasource. It sounds like you've edited that file unintentionally. Unless you need to persist internal queues etc across boots, just leave it as shipped using Hypersonic.
See the JBoss doc for more.