I am trying to insert into a numeric column a decimal but I keep getting an error.
Below is my statement
INSERT INTO blse VALUES (2082.7, 'Total Nonfarm' ,'Alabama','01/31/2020');
it basically says i need to cast this statement. I do not know what I am doing wrong.. I am beginner taking this class.
and this is the error:
It is highly recommended that you specify the columns in an INSERT statement:
INSERT INTO tab (col1, col2, col3)
VALUES (val1, val2, val3);
That way, you can be certain what value is inserted where.
Since you didn't do that, the first value in the VALUES clause gets inserted into the first table column, which is of type date. That causes the error you observe.
I do
INSERT INTO table DEFAULT VALUES RETURNING id
which returns the ID, which is later used in the calling code. But if I do
INSERT INTO table DEFAULT VALUES RETURNING id;
INSERT INTO table DEFAULT VALUES RETURNING id;
INSERT INTO table DEFAULT VALUES RETURNING id;
I only get the latest returned value.
What's a proper way to do it, as an either "do this n times" construct or a union of the above (which should work for any return query)?
You can exploit the (lesser known fact) that you can run a SELECT statement without putting any column into the select list.
insert into the_table --<< no columns here!
select --<< no columns here either!
from generate_series(1,3);
Online example
I have a table. I wrote a function in plpgsql that inserts a row into this table:
INSERT INTO simpleTalbe (name,money) values('momo',1000) ;
This table has serial field called id. I want in the function after I insert the row to know the id that the new row received.
I thought to use:
select nextval('serial');
before the insert, is there a better solution?
Use the RETURNING clause. You need to save the result somewhere inside PL/pgSQL - with an appended INTO ..
INSERT INTO simpleTalbe (name,money) values('momo',1000)
RETURNING id
INTO _my_id_variable;
_my_id_variable must have been declared with a matching data type.
Related:
PostgreSQL next value of the sequences?
Depending on what you plan to do with it, there is often a better solution with pure SQL. Examples:
Combining INSERT statements in a data-modifying CTE with a CASE expression
PostgreSQL multi INSERT...RETURNING with multiple columns
select nextval('serial'); would not do what you want; nextval() actually increments the sequence, and then the INSERT would increment it again. (Also, 'serial' is not the name of the sequence your serial column uses.)
#Erwin's answer (INSERT ... RETURNING) is the best answer, as the syntax was introduced specifically for this situation, but you could also do a
SELECT currval('simpletalbe_id_seq') INTO ...
any time after your INSERT to retrieve the current value of the sequence. (Note the sequence name format tablename_columnname_seq for the automatically-defined sequence backing the serial column.)
I have a table named "temp_table" and a column named "temp_column" of type varchar. The problem is "temp_column" must be of type integer. If I will just automatically update the table into type integer, it will generate an error since some data has non-numeric data in it.
I want a query that will show all rows if "temp_column" has non-numeric values in it (or the other way around) and update or SET the value accordingly. I'm having a hard time since ISNUMERIC is not available in postgresql.
how to do this?
This will show all rows where you have non-integer values in that column. It uses a regular expression to find all values that have anything else than just numbers in it:
select *
from temp_table
where temp_column ~ '[^0-9]';
this can also be used in an update statement:
update temp_table
set temp_column = null
where temp_column ~ '[^0-9]';
This will also filter out "numeric" values like 3.14 as those aren't integers.
In PostgreSQL, how do I get the last id inserted into a table?
In MS SQL there is SCOPE_IDENTITY().
Please do not advise me to use something like this:
select max(id) from table
( tl;dr : goto option 3: INSERT with RETURNING )
Recall that in postgresql there is no "id" concept for tables, just sequences (which are typically but not necessarily used as default values for surrogate primary keys, with the SERIAL pseudo-type).
If you are interested in getting the id of a newly inserted row, there are several ways:
Option 1: CURRVAL(<sequence name>);.
For example:
INSERT INTO persons (lastname,firstname) VALUES ('Smith', 'John');
SELECT currval('persons_id_seq');
The name of the sequence must be known, it's really arbitrary; in this example we assume that the table persons has an id column created with the SERIAL pseudo-type. To avoid relying on this and to feel more clean, you can use instead pg_get_serial_sequence:
INSERT INTO persons (lastname,firstname) VALUES ('Smith', 'John');
SELECT currval(pg_get_serial_sequence('persons','id'));
Caveat: currval() only works after an INSERT (which has executed nextval() ), in the same session.
Option 2: LASTVAL();
This is similar to the previous, only that you don't need to specify the sequence name: it looks for the most recent modified sequence (always inside your session, same caveat as above).
Both CURRVAL and LASTVAL are totally concurrent safe. The behaviour of sequence in PG is designed so that different session will not interfere, so there is no risk of race conditions (if another session inserts another row between my INSERT and my SELECT, I still get my correct value).
However they do have a subtle potential problem. If the database has some TRIGGER (or RULE) that, on insertion into persons table, makes some extra insertions in other tables... then LASTVAL will probably give us the wrong value. The problem can even happen with CURRVAL, if the extra insertions are done intto the same persons table (this is much less usual, but the risk still exists).
Option 3: INSERT with RETURNING
INSERT INTO persons (lastname,firstname) VALUES ('Smith', 'John') RETURNING id;
This is the most clean, efficient and safe way to get the id. It doesn't have any of the risks of the previous.
Drawbacks? Almost none: you might need to modify the way you call your INSERT statement (in the worst case, perhaps your API or DB layer does not expect an INSERT to return a value); it's not standard SQL (who cares); it's available since Postgresql 8.2 (Dec 2006...)
Conclusion: If you can, go for option 3. Elsewhere, prefer 1.
Note: all these methods are useless if you intend to get the last inserted id globally (not necessarily by your session). For this, you must resort to SELECT max(id) FROM table (of course, this will not read uncommitted inserts from other transactions).
Conversely, you should never use SELECT max(id) FROM table instead one of the 3 options above, to get the id just generated by your INSERT statement, because (apart from performance) this is not concurrent safe: between your INSERT and your SELECT another session might have inserted another record.
See the RETURNING clause of the INSERT statement. Basically, the INSERT doubles as a query and gives you back the value that was inserted.
Leonbloy's answer is quite complete. I would only add the special case in which one needs to get the last inserted value from within a PL/pgSQL function where OPTION 3 doesn't fit exactly.
For example, if we have the following tables:
CREATE TABLE person(
id serial,
lastname character varying (50),
firstname character varying (50),
CONSTRAINT person_pk PRIMARY KEY (id)
);
CREATE TABLE client (
id integer,
CONSTRAINT client_pk PRIMARY KEY (id),
CONSTRAINT fk_client_person FOREIGN KEY (id)
REFERENCES person (id) MATCH SIMPLE
);
If we need to insert a client record we must refer to a person record. But let's say we want to devise a PL/pgSQL function that inserts a new record into client but also takes care of inserting the new person record. For that, we must use a slight variation of leonbloy's OPTION 3:
INSERT INTO person(lastname, firstname)
VALUES (lastn, firstn)
RETURNING id INTO [new_variable];
Note that there are two INTO clauses. Therefore, the PL/pgSQL function would be defined like:
CREATE OR REPLACE FUNCTION new_client(lastn character varying, firstn character varying)
RETURNS integer AS
$BODY$
DECLARE
v_id integer;
BEGIN
-- Inserts the new person record and retrieves the last inserted id
INSERT INTO person(lastname, firstname)
VALUES (lastn, firstn)
RETURNING id INTO v_id;
-- Inserts the new client and references the inserted person
INSERT INTO client(id) VALUES (v_id);
-- Return the new id so we can use it in a select clause or return the new id into the user application
RETURN v_id;
END;
$BODY$
LANGUAGE plpgsql VOLATILE;
Now we can insert the new data using:
SELECT new_client('Smith', 'John');
or
SELECT * FROM new_client('Smith', 'John');
And we get the newly created id.
new_client
integer
----------
1
you can use RETURNING clause in INSERT statement,just like the following
wgzhao=# create table foo(id int,name text);
CREATE TABLE
wgzhao=# insert into foo values(1,'wgzhao') returning id;
id
----
1
(1 row)
INSERT 0 1
wgzhao=# insert into foo values(3,'wgzhao') returning id;
id
----
3
(1 row)
INSERT 0 1
wgzhao=# create table bar(id serial,name text);
CREATE TABLE
wgzhao=# insert into bar(name) values('wgzhao') returning id;
id
----
1
(1 row)
INSERT 0 1
wgzhao=# insert into bar(name) values('wgzhao') returning id;
id
----
2
(1 row)
INSERT 0
The other answers don't show how one might use the value(s) returned by RETURNING. Here's an example where the returned value is inserted into another table.
WITH inserted_id AS (
INSERT INTO tbl1 (col1)
VALUES ('foo') RETURNING id
)
INSERT INTO tbl2 (other_id)
VALUES ((select id from inserted_id));
See the below example
CREATE TABLE users (
-- make the "id" column a primary key; this also creates
-- a UNIQUE constraint and a b+-tree index on the column
id SERIAL PRIMARY KEY,
name TEXT,
age INT4
);
INSERT INTO users (name, age) VALUES ('Mozart', 20);
Then for getting last inserted id use this for table "user" seq column name "id"
SELECT currval(pg_get_serial_sequence('users', 'id'));
SELECT CURRVAL(pg_get_serial_sequence('my_tbl_name','id_col_name'))
You need to supply the table name and column name of course.
This will be for the current session / connection
http://www.postgresql.org/docs/8.3/static/functions-sequence.html
For the ones who need to get the all data record, you can add
returning *
to the end of your query to get the all object including the id.
You can use RETURNING id after insert query.
INSERT INTO distributors (id, name) VALUES (DEFAULT, 'ALI') RETURNING id;
and result:
id
----
1
In the above example id is auto-increment filed.
The better way is to use Insert with returning. Though there are already same answers, I just want to add, if you want to save this to a variable then you can do this
insert into my_table(name) returning id into _my_id;
Postgres has an inbuilt mechanism for the same, which in the same query returns the id or whatever you want the query to return.
here is an example. Consider you have a table created which has 2 columns column1 and column2 and you want column1 to be returned after every insert.
# create table users_table(id serial not null primary key, name character varying);
CREATE TABLE
#insert into users_table(name) VALUES ('Jon Snow') RETURNING id;
id
----
1
(1 row)
# insert into users_table(name) VALUES ('Arya Stark') RETURNING id;
id
----
2
(1 row)
Try this:
select nextval('my_seq_name'); // Returns next value
If this return 1 (or whatever is the start_value for your sequence), then reset the sequence back to the original value, passing the false flag:
select setval('my_seq_name', 1, false);
Otherwise,
select setval('my_seq_name', nextValue - 1, true);
This will restore the sequence value to the original state and "setval" will return with the sequence value you are looking for.
I had this issue with Java and Postgres.
I fixed it by updating a new Connector-J version.
postgresql-9.2-1002.jdbc4.jar
https://jdbc.postgresql.org/download.html:
Version 42.2.12
https://jdbc.postgresql.org/download/postgresql-42.2.12.jar
Based on #ooZman 's answer above, this seems to work for PostgreSQL v12 when you need to INSERT with the next value of a "sequence" (akin to auto_increment) without goofing anything up in your table(s) counter(s). (Note: I haven't tested it in more complex DB cluster configurations though...)
Psuedo Code
$insert_next_id = $return_result->query("select (setval('"your_id_seq"', (select nextval('"your_id_seq"')) - 1, true)) +1");