I try install gitlab-ce on CentOS 6.7(Final). but, failed.
My Environment
use proxy (set proxy in /etc/yum.conf)
my gitlab_gitlab-ce.repo file
(https://packages.gitlab.com/gitlab/gitlab-ce/install manual configuration)
[gitlab_gitlab-ce]
name=gitlab_gitlab-ce
baseurl=https://packages.gitlab.com/gitlab/gitlab-ce/el/6/$basearch
repo_gpgcheck=1
enabled=1
gpgkey=https://packages.gitlab.com/gpg.key
sslverify=1
sslcacert=/etc/pki/tls/certs/ca-bundle.crt
[gitlab_gitlab-ce-source]
name=gitlab_gitlab-ce-source
baseurl=https://packages.gitlab.com/gitlab/gitlab-ce/el/6/SRPMS
repo_gpgcheck=1
enabled=1
gpgkey=https://packages.gitlab.com/gpg.key
sslverify=1
sslcacert=/etc/pki/tls/certs/ca-bundle.crt
when excute install command, occur error
yum -q makecache -y --disablerepo='*' --enablerepo='gitlab_gitlab-ce'
https://packages.gitlab.com/gitlab/gitlab-ce/el/6/x86_64/repodata/repomd.xml: [Errno 14] Peer cert cannot be verified or peer cert invalid
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: gitlab_gitlab-ce. Please verify its path and try again
What should I do ? Help me please.
You first check Proxy setting of your system.
Fire below command:
yum update
if it wont work then set proxy in File: /etc/yum.conf
And then check.
Related
I am having an issue with a lab server I am running using CentOS 9, when I'm trying to install Grafana, the GPG check fails. This is the output I get:
Importing GPG key 0x24098CB6:
Userid : "Grafana <info#grafana.com>"
Fingerprint: 4E40 DDF6 D76E 284A 4A67 80E4 8C8C 34C5 2409 8CB6
From : https://packages.grafana.com/gpg.key
Is this ok [y/N]: y
Key import failed (code 2). Failing package is: grafana-8.5.5-1.x86_64
GPG Keys are configured as: https://packages.grafana.com/gpg.key
The downloaded packages were saved in cache until the next successful transaction.
You can remove cached packages by executing 'dnf clean packages'.
Error: GPG check FAILED
When I try the same on my local Fedora 35 machine, I get this:
Importing GPG key 0x24098CB6:
Userid : "Grafana <info#grafana.com>"
Fingerprint: 4E40 DDF6 D76E 284A 4A67 80E4 8C8C 34C5 2409 8CB6
From : https://packages.grafana.com/gpg.key
Is this ok [y/N]: y
Key imported successfully
Running transaction check
The packages being downloaded are the same grafana-8.5.5-1.x86_64.rpm, I am using dnf for both installations, and the grafana.repo files are both the same:
[grafana]
name=grafana
baseurl=https://packages.grafana.com/oss/rpm
repo_gpgcheck=1
enabled=1
gpgcheck=1
gpgkey=https://packages.grafana.com/gpg.key
sslverify=1
sslcacert=/etc/pki/tls/certs/ca-bundle.crt
I know I could just turn off the gpg checking, but I am not comfortable with a solution like that.
Any help resolving this would be greatly appreciated! Let me know if I should supply any more information.
I've quite recently swapped over to CentOS and Fedora, so I apologize if this has been resolved before, but I was unable to find it.
There has been some change with the default crypto policies in CentOS streams 9.
update-crypto-policies --set DEFAULT:SHA1
The packages need to be re-signed with a SHA256 or SHA521 key instead of SHA1.
Ref: https://access.redhat.com/articles/6846411
i am trying to install logstash plugin "logstash-filter-environment" in a linux server with the command "sudo /usr/share/logstash/bin/logstash-plugin install logstash-filter-environment".
Got this error "Validating logstash-filter-environment
Unable to download data from https://rubygems.org - Received fatal alert: handshake_failure (https://api.rubygems.org/latest_specs.4.8.gz)
ERROR: Installation aborted, verification failed for logstash-filter-environment".
Tried these commands but no use:
sudo gem sources -r https://rubygems.org,
sudo gem sources -a http://rubygems.org
Please help if you know this issue, appreciate your time.
We installed Kubeflow 1.0 on Kubernetes 1.15.16 (with Azure) and we have an issue with SSL certificate when trying to install pip package in Jupiter Notebook. The same issue also appear when trying to install directly the package from the docker container used for the Notebook Server:
In order to provide more context about the mentioned issues, here are attached some outputs that contain the errores mentioned within.
Issues found during installation of ‘nose’ package
If we try:
pip install --index-url=https://pypi.python.org/simple/ nose
Output is:
WARNING: Certificate did not match expected hostname: pypi.python.org.
WARNING: Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError
Could not fetch URL https://pypi.python.org/simple/nose/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.python.org', port=443): Max retries exceeded with url: /simple/nose/
ERROR: Could not find a version that satisfies the requirement nose (from versions: none)
ERROR: No matching distribution found for nose
Could not fetch URL https://pypi.python.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.python.org', port=443): Max retries exceeded with url: /simple/pip/
Similar issue also happen using curl:
! curl https://pypi.org
Output:
curl: (51) SSL: no alternative certificate subject name matches target host name 'pypi.org'
We tried to ignore the SSL verification using
pip install --trusted-host pypi.org --trusted-host files.pythonhosted.org
But is also raise an error:
ERROR: Could not find a version that satisfies the requirement nose (from versions: none)
ERROR: No matching distribution found for nose
We dont know where to start to solve this...
Any help would be welcome!
Thanks a lot in advance!
I got a same exception in kubeflow with Azure.
This command work for me:
pip install xgboost -i http://pypi.douban.com/simple/ --trusted-host pypi.douban.com
pypi.douban.com is a chinese mirror url.
But when I go to the next step, I got the same ssl ca error when use kubeflow sdk in python. I'm still finding solution.
I'm trying to install the package CertBot Certificate but the system gives me an error
Here is what happens while yum is executing:
ca-certificates-2019.2.32-76.el7_7.noarch.rpm | 399 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Updating : ca-certificates-2019.2.32-76.el7_7.noarch 1/2
Error unpacking rpm package ca-certificates-2019.2.32-76.el7_7.noarch
error: unpacking of archive failed on file /etc/ssl/certs: cpio: rename
Verifying : ca-certificates-2019.2.32-76.el7_7.noarch 1/2
ca-certificates-2018.2.22-70.0.el7_5.noarch was supposed to be removed but is not!
Verifying : ca-certificates-2018.2.22-70.0.el7_5.noarch 2/2
Failed:
ca-certificates.noarch 0:2018.2.22-70.0.el7_5 ca-certificates.noarch 0:2019.2.32-76.el7_7
Complete!
Could not install OS dependencies. Aborting bootstrap!
Anyone knows how to fix this?
I fixed by doing the following commands:
cd /etc/ssl
mv certs certs.saved
ln -s ../pki/tls/certs certs
After that the problem stopped happening and i was able to successfully install the certificate.
I had this issue in centos 7 server and this commands solved the error :
$ mv /etc/ssl/certs /etc/ssl/certs.back
$ ln -s /etc/pki/tls/certs /etc/ssl/certs
$ yum update ca-certificate*
I'm trying to deploy hyperledger fabric on a raspberry pi, but it doesn't work. I'm searching for some tutorial but i didn't found it, there are someone that just did it?
Last time I've tried to run Hyperledger Fabric on RPi I've prepared following instructions:
Install latest RASPBIAN on SD card, you can download image from:
https://www.raspberrypi.org/downloads/raspbian/
Update and upgrade latest by running:
sudo apt-get update && sudo apt-get upgrade -y
Install required dependencies:
sudo apt-get install git curl gcc libc6-dev libltdl3-dev python-setuptools -y
Upgrade python pip installer:
sudo -H pip install pip --upgrade
Install docker and docker compose:
curl -sSL get.docker.com | shsudo usermod -aG docker pisudo pip install docker-compose
Logout/Login terminal session, so changes will take effect.
Install golang, by following instructions from: https://golang.org/doc/install
Create golang directory:
mkdir -p /home/pi/golang && mkdir -p /home/pi/golang/src/github/hyperledger/
Define environment variable
export GOPATH=/home/pi/golang
Make sure go binaries are in the path, e.g.:
export PATH=/usr/local/go/bin:$PATH
Clone fabric-baseimage repository into /home/pi/golang/src/github/hyperledger/
git clone https://github.com/hyperledger/fabric-baseimage.git
Clone client fabric repository into /home/pi/golang/src/github/hyperledger/
git clone https://github.com/hyperledger/fabric.git
Build based docker images
cd ~/golang/src/github/hyperledger/fabric-baseimage && make docker-local
Apply following patch to fabric code base:
--- a/peer/core.yaml
+++ b/peer/core.yaml
## -68,7 +68,6 ## peer:
# Gossip related configuration
gossip:
- bootstrap: 127.0.0.1:7051
# Use automatically chosen peer (high avalibility) to distribute blocks in channel or static one
# Setting this true and orgLeader true cause panic exit
useLeaderElection: false
## -280,7 +279,7 ## vm:
Config:
max-size: "50m"
max-file: "5"
- Memory: 2147483648
+ Memory: 16777216
AND
--- a/core/container/util/dockerutil.go
+++ b/core/container/util/dockerutil.go
## -45,6 +45,7 ## func NewDockerClient() (client *docker.Client, err error) {
// and GOARCH here.
var archRemap = map[string]string{
"amd64": "x86_64",
+ "arm": "armv7l",
}
func getArch() string {
Build Hyperledger peer and
cd ~/golang/src/github/hyperledger/fabric && make clean peer peer-docker
Peer executable binary will appear in:
~/golang/src/github/hyperledger/fabric/build/bin/