I have installed POWA on 2012 R2 trough powershell.
Install-WindowsFeature -Name WindowsPowerShellWebAccess -IncludeManagementTools
Install-PswaWebApplication
Add-PswaAothorizationRule * * *
Navigating to https://server/powa or https://server.fqdn/powa leads to a 404 "File or directory not found". I've checked the IIS and forlder structure and everything is there. I've tried IE and chrome but both returning this error.
SSL is activated on the powa application
Pool is running with elevated user and correct right allocation
I am using a domain certificate for SSL
What am i missing here?
Thanks a lot and Best Regards
Certificate was not valid for this procedure, used another domain certificate that met the FQDM requirements.
Related
I'm trying to deploy an application via web deploy to a windows 2012 r2 server.
First tried installing iis, web deploy using the msi. After getting an unreachable error I saw somewhere that I needed wmsvc to be installed and installed it via powershell command Install-WindowsFeature Web-Mgmt-Service.
I stopped getting the unreachable error and started getting this error ->
Error: Could not complete the request to remote agent URL 'http://xx.x.xx.xx:8172/MSDEPLOYAGENTSERVICE'.
Error: The operation has timed out
On the server's event viewer under system I get the following error ->
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.
Any idea of what could be going on? Did I miss something on the installation?
After this I also tried installing everything but without iis and I get the same error.
So, this is really not a PoSH issue.
Maybe you should consider movin gthis question to another forum.
Anyway, you have either real server config issues (this can sometimes mean wipe and rebuild - very ugly option - but if it's a virtual machine and you have a snapshot, just roll back), or an app causing this.
Typically for Schannel type of error, it has to do with application or service in machine not able to complete any SSL connection sort of connection.
The error state parameter of 1203 means client error connecting to server, ie invalid ClientHello from the client
See if you can collect more data by...
https://support.microsoft.com/en-us/help/260729/how-to-enable-schannel-event-logging-in-iis
I realized this is an old question, but in case somebody ran into the same issue, here are my solution.
I had to follow this guidelines : https://learn.microsoft.com/en-us/aspnet/web-forms/overview/deployment/configuring-server-environments-for-web-deployment/configuring-a-web-server-for-web-deploy-publishing-web-deploy-handler
Copy the resulting publishsetting file. In the Publish/Profile page import it.
In the Publish/Connection page, change the server to the server address with the 8172 port. Add the password. Change the Destination URL to the site to go to after the publish is completed.
Then after Validate connection was completed, go ahead and publish it!
On Windows Server 2012 Datacenter with Microsoft Dynamics CRM 2016 installed, I want to run a deployment command but for every commands I get this error: "(500) Internal Server Error".
I first run this:
Add-PSSnapin Microsoft.Crm.PowerShell
and it will work fine and when I check it with get-pssnapin and Get-Help *Crm*, every thing is fine and every thing that I need is registered. but when I want to run a cmdlets command like these, I face the error: Get-CrmSetting or Get-CrmCertificate or ...
For example for Get-CrmSetting TraceSettings it give me this error:
How can I solve this problem and error?
Thanks
According to this article, you might want to try:
Get-CrmSetting –SettingType TraceSettings
Here are a couple more items to investigate, from this article:
To use the XRM tooling cmdlets, you need PowerShell version 3.0 or
later. To check the version, open a PowerShell window and run the
following command: $Host
Set the execution policy to run the signed PowerShell scripts. To do
so, open a PowerShell window as an administrator and run the
following command: Set-ExecutionPolicy -ExecutionPolicy AllSigned
Verify the (CRMDeploymentServiceAppPool Application Pool identity) has SQL SEVER SysAdmin permission. This is needed to perform any CRM configuration changes and organizational operations.
Note: it does not matter if the account executing the PowerShell is a system admin or SQL server sysadmin because these operations are executed via the deployment web service.
Deployment Web Service (CRMDeploymentServiceAppPool Application Pool identity)
....Sysadmin permission on the instance of SQL Server to be used for the configuration and organization databases.
....
(500) Internal Server Error, refers to a HTTP response status code. This means that the Powershell command is calling a URL and the URL is reporting a error.
You need to know the URL to really find out what the problem is. One way you can get the URL, is downloading Fiddler Classic. Once installed, you have to enable HTTPS decryption.
In my case the URL was...
https://<my-crm-domain>/XrmDeployment/2011/deployment.svc?wsdl
When I ran this URL on the server where CRM is installed, I got an exception stating...
Could not load file or assembly 'Microsoft.Crm.Application.Components.Application'
All this meant, I needed to copy a file, Microsoft.Crm.Application.Components.Application.dll, from C:\Program Files\Dynamics 365\CRMWeb\bin into folder C:\Program Files\Dynamics 365\CRMWeb\XRMDeployment\bin.
Once this was done, the URL worked and therefor my PowerShell command as well.
Recently migrated an ASP.NET application from an old server to a new server
Both servers have the Same OS Windows Server 2008 R2 Standard
IIS 7.5 on both servers
SQL Server 2008 R2
The only difference is the amount of RAM and CPU speed
I have gone the server point to point and cannot find any differences.
I had a developer look at the code and he says its not the code
On the old server the website loads fine on the new server I get an error when browsing the website via domain name
Microsoft SQL Server Native Client 10.0 error '80040e4d'
Login failed for user 'NT AUTHORITY\IUSR'.
/lib/SQLHelper.asp, line 134
I cannot find anywhere that NT AUTHORITY\IUSR is being told to attempt to log in. Im thinking it is some kind of default. I have googled every line of the error trying to find a resolve and have been basically flipping switches to try to find an answer, nothing i have tried provides any good results.
Is there a setting in the deep dark belly of windows that im not checking?
'NT AUTHORITY\IUSR' is used by IIS as the account for anonymous users. This means that IIS is using passing through the authentication information to the SQL server rather than using a specified user account.
In most situations you would either have specified an account to be used in the connection string or disabled anonymous access to ensure that the account passed through is a authenticated user account.
It is possible to give the IUSR account permissions on the SQL Server.
Try looking at this article as it may give you some assistance The error "Login failed for user 'NT AUTHORITY\IUSR'" in ASP.NET and SQL Server 2008
To whom it may respond to,
We have deployed a web service to Windows 2003 Server SP2 , .net framework 3.5 .
"The service is not running , we are getting the error :
The website declined to show this webpage
HTTP 403
Most likely causes:
•This website requires you to log in.
What you can try:
Go back to the previous page.
More information
This error (HTTP 403 Forbidden) means that Internet Explorer was able to connect to the website, but it does not have permission to view the webpage.
For more information about HTTP errors, see Help."
We have played around with the permissions but the situation didn't change a bit.
We would be very glad ideas on it,
Thank you for your concern,
Best Regards,
Kayhan YUKSEL
Make sure you have aspnet_isapi.dll as your wildcard handler in the Virtual Directory setup. Properties --> Virtual Directory --> Configuration --> Insert... --> aspnet_isapi.dll, make sure you uncheck Verify that file exists.
Installed:
SharePoint Server 2010 for Internet Enterprise Beta (x64)
On:
Windows Server 2008 Standard (x64) on 64 bit hardware
Attempts to access the Central Administration console led to IIS returning 503. The service is unavailable
And this error was found in the Application log
The Module DLL 'C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\isapi\owssvr.dll' could not be loaded due to a configuration problem. The current configuration only supports loading images built for a x86 processor architecture.
After much ado, the solution turned out to be:
1) Ensure that the enable32BitAppOnWin64 seeting for the "SharePoint Central Administration" app pool is set to False, and the same for the "SharePoint Web Services Root" app pool
2) Edit applicationHost.config:
Change:
<globalModules>
...
...
<add name="SharePoint14Module" image="C:\Program Files\Common
Files\Microsoft Shared\Web Server
Extensions\14\isapi\owssvr.dll"
preCondition="appPoolName=SharePoint
Central Administration v4" />
</globalModules>
To:
<add name="SharePoint14Module" image="C:\Program Files\Common Files\Microsoft
Shared\Web Server Extensions\14\isapi\owssvr.dll" preCondition=
"appPoolName=SharePoint Central Administration v4,bitness64" />
I hope this helps somebody :-)
bitness64 being the magic word here
I got a 503 error because the Application Pools weren't started in IIS for some reason.
1) Ensure that the enable32BitAppOnWin64 setting for the "SharePoint Central Administration" app pool is set to False, and the same for the "SharePoint Web Services Root" app pool
2) Edit applicationHost.config:
bitness64 being the magic word here
I agree with Beytan Kurt.
I had 503 thrown for both the Central Admin site as well as the SharePoint landing page. In both cases the Passwords were expired.
After resetting the password in the AD, and refreshing the Identity, CA worked but the SharePoint landing page threw a 500 error.
It turned out that the .Net Framework Version was set to V4.0. I changed it to V2.0 and it worked.
Remember after each change you need to recycle the appropriate app pool.
Can You Please try this :
Check the web site properties in IIS.
Under home directory tab, check the application pool value
Verify that all SharePoint services are started.
If the application is not started do the following:
I think this error might occur because of changing the service account password.
You may need to change the new password to application pool
1)Click the stopped application pool
2)click advanced settings
3)Identity ->click the user to retype the user
4) Application Pool Identity dialog
5)click set -> manually type the user name and password.
Then restart the server.
It can also happen if your password policy or something else have changed your password in case your appPools are using the the user with changed password.
So, you should update the user password from the advanced settings of your appPool throught "Identity" property.
The reference is here
I had trouble finding the applicationhost.config file. It was in c:\windows\System32\inetsrv\ (Server2008) or the c:\windows\System32\inetsrv\config\ (Server2008r2).
After I changed that setting, I also had to change the way IIS loads the aspnet_filter.dll. Open the IIS Manager, go under "Sites", "SharePoint - 80", in the "IIS" grouping, under the "ISAPI Filters", make sure that all of the "Executable" paths point to ...Microsoft.NET\Framework64\v#.#.####\aspnet_filter.dll. Some of mine were pointed to the \Framework\ (not 64).
You also need to restart the WWW service to reload the new settings.
The selected answer posted here solved one problem, but another is that you'll have to change the app pool to use .Net 2.0.
"SharePoint 2010 uses .NET Framework 3.5, not 4.0. The SharePoint 2010 app pools should be configured as .NET Framework 2.0 using the Integrated Pipeline Mode."
source:
http://social.msdn.microsoft.com/Forums/en-US/sharepoint2010general/thread/4727f9b4-cc58-4d86-903b-fabed13da0ff
Thanks for sharing this. It helped a lot. The one difference in my applicationHost.config was
<add name="SharePoint14Module" image="C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\isapi\owssvr.dll" preCondition="appPoolName=SharePoint Central Administration v4,bitness64;SharePoint - 80" />
Note the multiple semicolon seperated entries. This is probably because I have a single box install of SPS.
I was having a similar issue with a customer and none of the posted resolutions did the trick. I granted the "Log on as a batch job" permission via the Local Security Policy and that finally made the Central Administration web page come up properly.
Sometimes Web.config of the application ends up in an unconsistent state (duplicate declaration of http handlers, etc)
To check which line in config is causing the error open IIS Manager and try to edit the handler mappings..it will display you the error line if there is such an error in web config.
Strangely such errors do not get logged in Event viewer or ULS
I had the same issue but the password was good and "Log on as batch job" alone was not sufficient.
Check that the IIS application pool identity account or group has both the "Log on as Batch Job" permission AND that it can "impersonate a client after authentication".
To change these settings perform the following steps on the web front end server:
Start>Run type "secpol.msc"
Find: Security
Settings>Local Policies>User Rights assignment
Add user or group to
"Log on as Batch Job"
Check group membership of service account (in
Active Directory) if a particular group is being used for this
purpose.
Find "impersonate a client after authentication" and add the application pool identity
Reboot the server
You should be able to access the site!
Read the user and password in Application -> Advance Settings for Cental Admin application will work.