What is the concept behind taking the derivative? It's interesting that for somehow teaching a system, we have to adjust its weights. But why are we doing this using a derivation of the transfer function. What is in derivation that helps us. I know derivation is the slope of a continuous function at a given point, but what does it have to do with the problem.
You must already know that the cost function is a function with the weights as the variables.
For now consider it as f(W).
Our main motive here is to find a W for which we get the minimum value for f(W).
One of the ways for doing this is to plot function f in one axis and W in another....... but remember that here W is not just a single variable but a collection of variables.
So what can be the other way?
It can be as simple as changing values of W and see if we get a lower value or not than the previous value of W.
But taking random values for all the variables in W can be a tedious task.
So what we do is, we first take random values for W and see the output of f(W) and the slope at all the values of each variable(we get this by partially differentiating the function with the i'th variable and putting the value of the i'th variable).
now once we know the slope at that point in space we move a little further towards the lower side in the slope (this little factor is termed alpha in gradient descent) and this goes on until the slope gives a opposite value stating we already reached the lowest point in the graph(graph with n dimensions, function vs W, W being a collection of n variables).
The reason is that we are trying to minimize the loss. Specifically, we do this by a gradient descent method. It basically means that from our current point in the parameter space (determined by the complete set of current weights), we want to go in a direction which will decrease the loss function. Visualize standing on a hillside and walking down the direction where the slope is steepest.
Mathematically, the direction that gives you the steepest descent from your current point in parameter space is the negative gradient. And the gradient is nothing but the vector made up of all the derivatives of the loss function with respect to each single parameter.
Backpropagation is an application of the Chain Rule to neural networks. If the forward pass involves applying a transfer function, the gradient of the loss function with respect to the weights will include the derivative of the transfer function, since the derivative of f(g(x)) is f’(g(x))g’(x).
Your question is a really good one! Why should I move the weight more in one direction when the slope of the error wrt. the weight is high? Does that really make sense? In fact it does makes sense if the error function wrt. the weight is a parabola. However it is a wild guess to assume it is a parabola. As rcpinto says, assuming the error function is a parabola, make the derivation of the a updates simple with the Chain Rule.
However, there are some other parameter update rules that actually addresses this, non-intuitive assumption. You can make update rule that takes the weight a fixed size step in the down-slope direction, and then maybe later in the training decrease the step size logarithmic as you train. (I'm not sure if this method has a formal name.)
There are also som alternative error function that can be used. Look up Cross Entropy in you neural network text book. This is an adjustment to the error function such that the derivative (of the transfer function) factor in the update rule cancels out. Just remember to pick the right cross entropy function based on you output transfer function.
When I first started getting into Neural Nets, I had this question too.
The other answers here have explained the math which makes it pretty clear that a derivative term will appear in your calculations while you are trying to update the weights. But all of those calculations are being done in order to implement Back-propagation, which is just one of the ways of updating weights! Now read on...
You are correct in assuming that at the end of the day, all a neural network tries to do is update its weights to fit the data you feed into it. Within this statement lies your answer too. What you are getting confused with here is the idea of the Back-propagation algorithm. Many textbooks use backprop to update neural nets by default but do not mention that there are other ways to update weights too. This leads to the confusion that neural nets and backprop are the same thing and are inherently connected. This also leads to the false belief that neural nets need backprop to train.
Please remember that Back-propagation is just ONE of the ways out there to train your neural network (although it is the most famous one). Now, you must have seen the math involved in backprop, and hence you can see where the derivative term comes in from (some other answers have also explained that). It is possible that other training methods won't need the derivatives, although most of them do. Read on to find out why....
Think about this intuitively, we are talking about CHANGING weights, the direct mathematical operation related to change is a derivative, makes sense that you should need to evaluate derivatives to change weights.
Do let me know if you are still confused and I'll try to modify my answer to make it better. Just as a parting piece of information, another common misconception is that gradient descent is a part of backprop, just like it is assumed that backprop is a part of neural nets. Gradient descent is just one way to minimize your cost function, there are plenty of others you can use. One of the answers above makes this wrong assumption too when it says "Specifically Gradient Descent". This is factually incorrect. :)
Training a neural network means minimizing an associated "error" function wrt the networks weights. Now there are optimization methods that use only function values (Simplex method of Nelder and Mead, Hooke and Jeeves, etc), methods that in addition use first derivatives (steepest descend, quasi Newton, conjugate gradient) and Newton methods using second derivatives as well. So if you want to use a derivative method, you have to calculate the derivatives of the error function, which in return involves the derivatives of the transfer or activation function.
Back propagation is just a nice algorithm to calculate the derivatives, and nothing more.
Yes, the question was really good, this question was also came in my head while i am understanding the Backpropagation. After doing ForwordPropagation on neural network we do back propagation in network to minimize the total error. And there also many other way to minimize the error.your question is why we are doing derivative in backpropagation, the reason is that, As we all know the meaning of derivative is to find the slope of a function or in other words we can find change of particular thing with respect to particular thing. So here we are doing derivative to minimize the total error with respect to the corresponding weights of the network.
and here by doing the derivation of total error with respect to weights we can find it's slope or in other words we can find what is the change in total error with respect to the small change of the weight, so that we can update the weight to minimize the error with the help of this Gradient Descent formula, that is, Weight= weight-Alpha*(del(Total error)/del(weight)).Or in other words New Weights = Old Weights - learning-rate x Partial derivatives of loss function w.r.t. parameters.
Here Alpha is the learning rate which is control the weight update, means if the derivative the - ve than Alpha make it +ve(Becouse of -Alpha in formula) and if +ve it's remain +ve so that weight update goes in +ve direction and it's reflected to minimize the Total error.And also the as derivative part is multiples with Alpha, it's decrees the step size of Alpha when the weight converge to the optimal value of weight(minimum error). Thats why we are doing derivative to minimize the error.
Related
I am currently trying to teach me something about neural networks. So I bought myself this book called Applied Artificial Intelligence written by Wolfgang Beer and I am now stuck at understanding a part of his code. Actually I understand the code I just do not understand one mathematical step behind it...
The part looks like this:
for i in range(iterations):
guessed = sig(inputs*weights)
error = output - guessed
adjustment = error*sig_d(outpus)
#Why is there no learningrate?
#Why is the adjustment relative to the error
#muliplied by the derivative of your main function?
weights += adjustment
I tried to look up how the gradient descent method works, but I never got the part with ajusting the weights. How does the math behind it work and why do you use the derivative for it?
Alo when I started to look in the internet for other solutions I always saw them using a learning rate. I understand the consept of it but why is this method not used in this book? It would realy help me if someone could awnser me these questions...
And thanks for all these rapid responses in the past.
To train a regression model we start with arbitrary weights and adjust weights so that the error will be minimum. If we plot the error as a function of weights we will get a plot like above figure where error J(θ0,θ1) is a function of weights θ0,θ1. We will be succeeded when our error will be very bottom of the graph when its value is the minimum. The red arrows show the minimum points in the graph. To reach to the minimum point we take derivative (the tangential line to a function) of our error function. The slope of the tangent is the derivative at that point and it will give us a direction to move towards. We make steps down the cost function in the direction with the steepest descent. The size of each step is determined by the parameter α, which is called the learning rate.
The gradient descent algorithm is:
repeat until convergence:
θj:=θj −[ Derivative of J(θ0,θ1) in respect of θj]
where
j=0,1 represents the weights' index number.
In the above figure we plot error J(θ1) is a function of weight θ1. We start with an arbitrary value of θ1 and take derivative(slope of the tangent) of error J(θ1) to adjust weight θ1 so we can reach the bottom where error is minimum. If slope is positive we have to go left or decrease weight θ1. And if slope is negative we have to go right or increase θ1. We have to repeat this procedure until convergence or reaching minimum point.
If learning rate α is too small gradient descent converges too slow. And if α is too large gradient descent overshoots and fails to converge.
All the figures have been taken from Andrew Ng's machine learning course on coursera.org
https://www.coursera.org/learn/machine-learning/home/welcome
Why is there no learningrate?
there are lots of different flavors of neural networks, some will use learning rates and others probably just keep this constant
Why is the adjustment relative to the error
what else should it be relative to? If there is a lot of error then chances are you need to do a lot of adjustments, if there was only a little error then you would only want to adjust your weights a small amount.
muliplied by the derivative of your main function?
dont really have a good answer for this one.
I'm trying to get a better understanding of neural networks by trying to programm a Convolution Neural Network by myself.
So far, I'm going to make it pretty simple by not using max-pooling and using simple ReLu-activation. I'm aware of the disadvantages of this setup, but the point is not making the best image detector in the world.
Now, I'm stuck understanding the details of the error calculation, propagating it back and how it interplays with the used activation-function for calculating the new weights.
I read this document (A Beginner's Guide To Understand CNN), but it doesn't help me understand much. The formula for calculating the error already confuses me.
This sum-function doesn't have defined start- and ending points, so i basically can't read it. Maybe you can simply provide me with the correct one?
After that, the author assumes a variable L that is just "that value" (i assume he means E_total?) and gives an example for how to define the new weight:
where W is the weights of a particular layer.
This confuses me, as i always stood under the impression the activation-function (ReLu in my case) played a role in how to calculate the new weight. Also, this seems to imply i simply use the error for all layers. Doesn't the error value i propagate back into the next layer somehow depends on what i calculated in the previous one?
Maybe all of this is just uncomplete and you can point me into the direction that helps me best for my case.
Thanks in advance.
You do not backpropagate errors, but gradients. The activation function plays a role in caculating the new weight, depending on whether or not the weight in question is before or after said activation, and whether or not it is connected. If a weight w is after your non-linearity layer f, then the gradient dL/dw wont depend on f. But if w is before f, then, if they are connected, then dL/dw will depend on f. For example, suppose w is the weight vector of a fully connected layer, and assume that f directly follows this layer. Then,
dL/dw=(dL/df)*df/dw //notations might change according to the shape
//of the tensors/matrices/vectors you chose, but
//this is just the chain rule
As for your cost function, it is correct. Many people write these formulas in this non-formal style so that you get the idea, but that you can adapt it to your own tensor shapes. By the way, this sort of MSE function is better suited to continous label spaces. You might want to use softmax or an svm loss for image classification (I'll come back to that). Anyway, as you requested a correct form for this function, here is an example. Imagine you have a neural network that predicts a vector field of some kind (like surface normals). Assume that it takes a 2d pixel x_i and predicts a 3d vector v_i for that pixel. Now, in your training data, x_i will already have a ground truth 3d vector (i.e label), that we'll call y_i. Then, your cost function will be (the index i runs on all data samples):
sum_i{(y_i-v_i)^t (y_i-vi)}=sum_i{||y_i-v_i||^2}
But as I said, this cost function works if the labels form a continuous space (here , R^3). This is also called a regression problem.
Here's an example if you are interested in (image) classification. I'll explain it with a softmax loss, the intuition for other losses is more or less similar. Assume we have n classes, and imagine that in your training set, for each data point x_i, you have a label c_i that indicates the correct class. Now, your neural network should produce scores for each possible label, that we'll note s_1,..,s_n. Let's note the score of the correct class of a training sample x_i as s_{c_i}. Now, if we use a softmax function, the intuition is to transform the scores into a probability distribution, and maximise the probability of the correct classes. That is , we maximse the function
sum_i { exp(s_{c_i}) / sum_j(exp(s_j))}
where i runs over all training samples, and j=1,..n on all class labels.
Finally, I don't think the guide you are reading is a good starting point. I recommend this excellent course instead (essentially the Andrew Karpathy parts at least).
I think I've understood each step of backpropagation algorithm but the most important one. How do weights get updated? Like at the end of this tutorial? http://home.agh.edu.pl/~vlsi/AI/backp_t_en/backprop.html
The weight updates are done via the equations written at the last part of the page (Backpropagation) you provided.
Let me elaborate a little bit:
New Weights = Old Weights - learning-rate x Partial derivatives of loss function w.r.t. parameters
For a given weight, calculate the (which can be done easily by back propagating the error) which is nothing but the steepest direction of the function and subtract a scaled version of it, the scale factor being the step size or how large step you want to make in that direction.
Just a little clarification which I felt you might need after looking at the way you asked the question ...
What is exactly Back-propagation?
Backpropagation is just a trick to quickly evaluate the partial derivatives of the loss function w.r.t. all weights. It has nothing to do with weight updating. Updating the weights is a part of gradient descent algorithm.
I have been reading this ebook about ANN:https://www4.rgu.ac.uk/files/chapter3%20-%20bp.pdf
and got a doubt about the effect of the sigmoid function for calculating the errorB. In the text says that if I have threshold neuron I can use:
Target-Output
but because I have a sigmoid function involved I should add:
Output(1-Output)
and end up with:
ErrorB=OutputB(1-OutputB)(TargetB-OutputB)
I mean why I should add the part of O(1-O), I have tried with different values, but I really do not get the intuition why it should be in that way.
Any help?
Thanks
As Kelu stated, that part of the equation is based on derivatives of your transfer function (in this case sigmoid). To understand why you need derivatives, you need to understand how the delta rule works(*):
Your overall goal is to minimize the error in the network's output using gradient descent. Gradient descent itself tries to find a minimum in the error function (E) by taking steps proportional to the negative of the gradient. A gradient is simply the derivative and the reason you're working with derivatives mathematically is that gradients point in the direction of the greatest rate of increase of the (error) function. Conclusion: Since you wanna minimize the error, you go the opposite way of the gradient.
This is the intuitive reason for using gradients. If you want the mathematical derivation, you should check this basic wiki article (additional comment as it's not mentioned anywhere: the g'(x) in the article is the first derivative of g(x))
Other transfer functions can be used, e.g. linear (in this case there is no g'(x) term as the derivative is simply a constant) or hyperbolic tangent in which case the derivative is something different again.
(*) Equation is derived from following equation where you start by minimizing the error of the output:
It is like that because of the fact that Output(1-Output) is a derivative of sigmoid function (simplified). In general, this part is based on derivatives, you can try with different functions (from sigmoid) and then you have to use their derivatives too to get a proper learning rate.
If you want you can take a look at my implementation (it's far from perfect, but maybe you will get some idea from it ;)), it's a simple project I made on my university - https://github.com/kelostrada/neuron-network
Can anyone explain to me in a easy and less mathematical way what is a Hessian and how does it work in practice when optimizing the learning process for a neural network ?
To understand the Hessian you first need to understand Jacobian, and to understand a Jacobian you need to understand the derivative
Derivative is the measure of how fast function value changes withe the change of the argument. So if you have the function f(x)=x^2 you can compute its derivative and obtain a knowledge how fast f(x+t) changes with small enough t. This gives you knowledge about basic dynamics of the function
Gradient shows you in multidimensional functions the direction of the biggest value change (which is based on the directional derivatives) so given a function ie. g(x,y)=-x+y^2 you will know, that it is better to minimize the value of x, while strongly maximize the vlaue of y. This is a base of gradient based methods, like steepest descent technique (used in the traditional backpropagation methods).
Jacobian is yet another generalization, as your function might have many values, like g(x,y)=(x+1, xy, x-z), thus you now have 23 partial derivatives, one gradient per each output value (each of 2 values) thus forming together a matrix of 2*3=6 values.
Now, derivative shows you the dynamics of the function itself. But you can go one step further, if you can use this dynamics to find the optimum of the function, maybe you can do even better if you find out the dynamics of this dynamics, and so - compute derivatives of second order? This is exactly what Hessian is, it is a matrix of second order derivatives of your function. It captures the dynamics of the derivatives, so how fast (in what direction) does the change change. It may seem a bit complex at the first sight, but if you think about it for a while it becomes quite clear. You want to go in the direction of the gradient, but you do not know "how far" (what is the correct step size). And so you define new, smaller optimization problem, where you are asking "ok, I have this gradient, how can I tell where to go?" and solve it analogously, using derivatives (and derivatives of the derivatives form the Hessian).
You may also look at this in the geometrical way - gradient based optimization approximates your function with the line. You simply try to find a line which is closest to your function in a current point, and so it defines a direction of change. Now, lines are quite primitive, maybe we could use some more complex shapes like.... parabolas? Second derivative, hessian methods are just trying to fit the parabola (quadratic function, f(x)=ax^2+bx+c) to your current position. And based on this approximation - chose the valid step.