I am starting to use kubernetes/Minikube to deploy my application which is currently running on docker containers.
Docker version:19.03.7
Minikube version: v1.25.2
From what I read I gather that first of all I need to build my frontend/backend images inside minikube.
The image is available on the server and I can see it using:
$ docker image ls
The first step, as far as I understand, is to use the "docker build" command:
$docke build -t my-image .
However, the dot at the end, so I understand, means it is looking for a Dockerfile in the curretn directoy, and indeed I get an error:
unable to evaluate symlinks in Dockerfile path: lstat
/home/dep/k8s-config/Dockerfile: no such file or directory
So, where do I get this dockerfile for the "docker build" to succeed?
Thanks
My missunderstanding...
I have the Dockefile now, so I should put it anywhere and use docker build from there.
I am using Laravel 4.2 with docker. I setup it on local. It worked without any problem but when I am trying to setup online using same procedure then I am getting error:
pull access denied for <projectname>/php, repository does not exist or may require 'docker login'
is it something relevant to create repository here https://cloud.docker.com/ or need to docker login in command?
After days of study I am still not able to figure out what could be the fix in this case and what are the right steps?
I have the complete code. I can paste here if need to check certain parts.
Please note that the error message from Docker is misleading.
$ docker build deploy/.
Sending build context to Docker daemon 5.632kB
Step 1/16 : FROM rhel7:latest
pull access denied for rhel7, repository does not exist or may require 'docker login'
It says that it may require 'docker login'.
I struggled with this. I realized the image does not exist at https://hub.docker.com any more.
Just make sure to write the docker name correctly!
In my case, I wrote (notice the extra 'u'):
FROM ubunutu:16.04
The correct docker name is:
FROM ubuntu:16.04
The message usually comes when you put the wrong image name. Please check your image if it exists on the Docker repository with the correct tag.
It helped me.
docker run -d -p 80:80 --name ngnix ngnix:latest
Unable to find image 'ngnix:latest' locally
docker: Error response from daemon: pull access denied for ngnix, repository does not exist or may require 'docker login': denied: requested access to the resource is denied.
See 'docker run --help'.
$ docker run -d -p 80:80 --name nginx nginx:latest
Unable to find image 'nginx:latest' locally
latest: Pulling from library/nginx
I had the same issue. In my case it was a private registry. So I had to create a secret as shown here
and then we have to add the image pull secret to the deployment.yaml file as shown below.
pods/private-reg-pod.yaml
apiVersion: v1
kind: Pod
metadata:
name: private-reg
spec:
containers:
- name: private-reg-container
image: <your-private-image>
imagePullSecrets:
- name: regcred
November 2020 and later
If this error is new, and pulling from Docker Hub worked in the past, note Docker Hub now introduced rate limiting in Nov 2020
You will frequently see messages like:
Warning: No authentication provided, using CircleCI credentials for pulls from Docker Hub.
From Circle CI and other similar tools that use Docker Hub. Or:
Error response from daemon: pull access denied for cimg/mongo, repository does not exist or may require 'docker login': denied: requested access to the resource is denied
You'll need to specify the credentials used to fetch the image:
For CircleCI users:
- image: circleci/mongo:4.4.2
# Needed to pull down Mongo images from Docker hub
# Get from https://hub.docker.com/
# Set up at https://app.circleci.com/pipelines/github/org/sapp
auth:
username: $DOCKERHUB_USERNAME
password: $DOCKERHUB_PASSWORD
I had the same issue
pull access denied for microsoft/mmsql-server-linux, repository does not exist or may require 'docker login': denied: requested access to the resource is denied
Turns out the DockerHub was moved to a different name
So I would suggest you re check-in docker hub
I solved this by inserting a language at the front of the docker image
FROM python:3.7-alpine
I had the same error message but for a totally different reason.
Being new to docker, I issued
docker run -it <crypticalId>
where <crypticalId> was the id of my newly created container.
But, the run command wants the id of an image, not a container.
To start a container, docker wants
docker start -i <crypticalId>
In my case I was using a custom image and docker baked into Minikube on my local machine.
I had specified the pull policy incorrectly:-
imagePullPolicy: Always
But it should have been:-
imagePullPolicy: IfNotPresent
Because the custom image was only present locally after I'd explicitly built it in the minikube docker environment.
I had this because I inadvertantly remove the AS tag from my first image:
ex:
FROM mcr.microsoft.com/windows/servercore:1607-KB4546850-amd64
...
.. etc ...
...
FROM mcr.microsoft.com/windows/servercore:1607-KB4546850-amd64
COPY --from=installer ["/dotnet", "/Program Files/dotnet"]
... etc ...
should have been:
FROM mcr.microsoft.com/windows/servercore:1607-KB4546850-amd64 AS installer
...
.. etc ...
...
FROM mcr.microsoft.com/windows/servercore:1607-KB4546850-amd64
COPY --from=installer ["/dotnet", "/Program Files/dotnet"]
... etc ...
I had the same issue when working with docker-composer. In my case it was an Amazon AWS ECR private registry. It seems to be a bug in docker-compose
https://github.com/docker/compose/issues/1622#issuecomment-162988389
After adding the full path "myrepo/myimage" to docker compose yaml
image: xxxxxxxxx.dkr.ecr.us-east-1.amazonaws.com/myrepo:myimage
it was all fine.
This error message might possibly indicate something else.
In my case I defined another Docker-Image elsewhere from which the current Docker inherited its settings (docker-compos.yml):
FROM my_own_image:latest
The error message I got:
qohelet$ docker-compose up
Building web
Step 1/22 : FROM my_own_image:latest
ERROR: Service 'web' failed to build: pull access denied for my_own_image, repository does not exist or may require 'docker login'
Due to a reinstall the previous Docker were gone and I couldn't build my docker using docker-compose up with this command:
sudo docker build -t my_own_image:latest -f MyOwnImage.Dockerfile .
In your specific case you might have defined your own php-docker.
If the repository is private you have to assign permissions to download it. You have two options, with the docker login command, or put in ~/.docker/docker.config the file generated once you login.
if you have over two stage in the docker build process read this solution:
this error message is completely misleading.
if you have a two-stage (context) dockerfile and want to copy some data from the first to the second stage, you must label the first context (ex: build) and access it by that label
#stage(1)
from <image> as build
.
.
#stage(2)
From <image>
copy --from=build /sourceDir /distinationDir
Docker might have lost the authentication data. So you'll have to reauthenticate with your registry provider. With AWS for example:
aws ecr get-login --region us-west-2 --no-include-email
And then copy and paste that resulting "docker login..." to authenticated docker.
Source: Amazon ECR Registeries
If you're downloading from somewhere else than your own registry or docker-hub, you might have to do a separate agreement of terms on their site, like the case with Oracle's docker registry. It allows you to do docker login fine, but pulling the container won't still work until you go to their site and agree on their terms.
Make sure the image exists in docker hub. To me, I was trying to pull MongoDB using the command docker run mongodb which is incorrect. In the docker hub, the image name is mongo.
If you don't have an image with that name locally, docker will try to pull it from docker hub, but there's no such image on docker hub.
Or simply try "docker login".
If you are using multiple Dockerfiles you should not forget to run build for all of it. That was my case.
I had to run docker pull first, then running docker-compose up again and then it worked.
docker pull index.docker.io/youruser/yourrepo:latest
Try this in your docker-compose.yml file
image: php:rc-zts-alpine
When I run the command multiple times "docker pull scrapinghub/splash" in Power shell then it solve the issue.
if it was caused with AWS EC2 and ECR, due to name issue(happens with beginners!)
Error response from daemon: pull access denied for my-app, repository does not exist or may require 'docker login': denied: requested access to the resource is denied
when using docker pull use Image URI of the image, available in ECR-row itself as Copy URI
docker pull Image_URI
I have seen this message and thought something was wrong about my Docker authentication. However, I've realized that Docker only allows 1 private repository per free plan. So it is quite possible that you are trying to pull your private repository and see this error because have not upgraded your plan.
Got the same problem but nothing worked. And then I understood I need run .sh (.ps1) script first before doing docker-compose.
So I have the following files:
docker-compose.yml
docker-build.sh
docker-build.ps1
Dockerfile
And I had to first run docker-build.sh on Unix (Mac) machine or docker-build.ps1 on Windows:
sh docker-build.sh
It will build an image in my case.
And only then after an image has been built I can run:
docker-compose up --build
For references. Here is my docker-compose file:
version: '3.8'
services:
api-service:
image: x86_64/prediction-service:0.8.1
container_name: api-service
expose:
- 8060
ports:
- "8060:80"
And here is docker-build.sh:
VERSION="0.8.1"
ARCH="x86_64"
APP="prediction-service"
DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )"
docker build -f $DIR/Dockerfile -t $ARCH/$APP:$VERSION .
I had misspelled nginx to nignx in Dockerfile
In my case the solution was to re-create docker-file through visual studio and all worked perfeclty.
I heard the same issue.
I solved by login
docker login -u your_user_name
then I was prompt to enter docker hub password
The rest command work perfect after login successfull
Someone might come across the same error for different reasons than what is already presented, so let me share:
I got the same error when using docker multistage builds (Multiple: FROM <> as <>).
And I forgot to remove one (COPY --from=<> <>)
After removing that COPY then it worked fine.
Exceeded Docker Hub's Limit on Free Repos:
Despite first executing:
docker login -u <dockerhub uname>
and "Login Succeeded" being returned, I received the error in this question.
In the webgui in Settings > Visibility Settings I remarked:
Using 2 of 1 private repositories.
Which told me that I had exceeded the limit on Docker Hub's free account limits. However, removing a previous image didn't clear the error...
The Fix:
Indeed, the error message in my case was a red herring- it's nothing related to authentication issues.
Deleting just the images exceeding the allowed limit did NOT clear the error however!
To get past the error you need to delete ALL the images in your FREE Docker Hub account, then run a new build pushing the image to your account.
Your pull command will now succeed.
If I have a docker-compose file like:
version: "3"
services:
postgres:
image: postgres:9.4
volumes:
- db-data:/var/lib/db
volumes:
db-data:
... then doing docker-compose up creates a named volume for db-data. Is there a way to remove this volume via docker-compose? If it were an anonymous volume, then docker-compose rm -v postgres would do the trick. But as it stands, I don't know how to remove the db-data volume without reverting to docker commands. It feels like this should be possible from within the docker-compose CLI. Am I missing something?
docker-compose down -v
removes all volumes attached. See the docs
There's no way to target the removal of a specific named volume with the docker-compose cli. Instead this can be achieved using the docker cli. See the docs.
Use docker volume ls to find the name of specific volume.
Remove the volume using docker volume rm VOLUME_NAME. You will need to have stopped and removed containers using the volume.
An example approach:
# Stop and remove container's using the target volume
docker-compose stop NAME_OF_CONTAINER
# We need the force flag, "-f", as the container is still bound to the volume
docker-compose rm -f NAME_OF_CONTAINER
# Next find your volume name in the following list
docker volume ls
# Finally remove the volume
docker volume rm VOLUME_NAME
Jan, 2022 Update:
This removes all the containers, networks, volumes and images defined in the docker-compose.
docker-compose down -v --rmi all
"-v" is for all the volumes
"--rmi all" is for all the images
I had the same issue as you, excepting I wanted to discard the working state of my grafana container while leaving the other containers running, which are running detached (ie. sudo docker-compose up -d). Here's the procedure I've come up with:
sudo docker-compose ps
sudo docker-compose stop grafana
sudo docker-compose rm --force grafana
sudo docker volume rm metricsmonitoring_grafana_data
sudo docker-compose up --force-recreate -d grafana
I don't know (without playing further) how best to determine the name of the docker volume to remove.
This is on docker-compose version 1.18.0