i have tried a number of times to get php 5.6 working on ubuntu 16.04
I keep getting a server error 500 when trying to browse http:/domain.com/phpinfo.php to check which version of php is active (server also has 7.0, 7.1, & 7.2)
I also have same error when attempting to run php 7.1 (7.0 & 7.2 are working no problems and i have websites running on the virtualmin server.
I have looked at various answers about this kind of thing here but in all honesty, the answers are often so broken and different i cant find a single procedure that is reliable and works.
Anyone help with this?
For example, will the following ispconfig 3 tutorial, which installs php5.6 in /opt directory, work with virtualmin? ( https://www.howtoforge.com/tutorial/how-to-install-php-5-6-on-ubuntu-16-04/ )
My assumption is that the above tutorial will work and i just need to tell virtualmin where the php 5.6 binaries are located in /opt/? ( see this thread... https://www.virtualmin.com/node/40004 )
By default, Ubuntu 16.04 server assigns the PHP 7.07 or higher version. If you want to allow/assign PHP 5.6 on your server then you will have to install it manually from the following command:
Step 1: Step 1: Update Apt-Get
Linux command: apt-get update && apt-get upgrade.
Step 2: Install PHP 5.6
Install the PHP5.6 repository with these two commands.
Linux command:
apt-get install -y software-properties-common
add-apt-repository ppa:ondrej/php
apt-get update
apt-get install -y php5.6
Step 3: Switch PHP 7.0 to PHP 5.6
Switch from PHP 7.0 to PHP 5.6 while restarting Apache to recognize the change:
a2dismod php7.0 ; a2enmod php5.6 ; service apache2 restart
Verify that PHP 5.6 is running on Apache by putting up a PHP info page. To do so, use the code below in a file named as infopage.php and upload it to the /var/www/html directory.
<? phpinfo(); ?>
First add the ppa:ondrej/php repository:
sudo -s
apt-get update
apt-get install -y software-properties-common
add-apt-repository ppa:ondrej/php
If at this point it throws a CPG error like:
Reading package lists... Done
W: GPG error: http://ppa.launchpad.net/ondrej/php/ubuntu xenial InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY <THE_KEY>
W: The repository 'http://ppa.launchpad.net/ondrej/php/ubuntu xenial InRelease' is not signed.
N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.
N: See apt-secure(8) manpage for repository creation and user configuration details.
..pay attention in the 2nd line showing THE_KEY, then solve with:
apt-key adv --keyserver keyserver.ubuntu.com --recv-keys <THE_KEY>
Finally:
apt-get update
apt-get install -y php5.6
php -v
I am trying to install mongodb on my Ubuntu 18.04 LTS, but it has the following error saying
You might want to run 'apt --fix-broken install' to correct these. The
following packages have unmet dependencies: mongodb-org : Depends:
mongodb-org-server but it is not going to be installed
Depends: mongodb-org-mongos but it is not going to be installed
Depends: mongodb-org-tools but it is not going to be installed E: Unmet dependencies. Try 'apt --fix-broken install' with
no packages (or specify a solution).
umar#umar-Lenovo-ideapad-320-15ISK:~/Desktop/portfolio/async-demo$
sudo apt-get install -y mongodb
I beleieve the reason behind this is already mentioned on their website, clearly saying
PLATFORM SUPPORT
MongoDB only provides packages for 64-bit LTS (long-term support)
Ubuntu releases; for example, 14.04 LTS (trusty) and 16.04 LTS
(xenial). See Supported Platforms for more information.
These packages may work with other Ubuntu releases; however, they are
not supported.
So how can I install mongodb on my latest Ubuntu 18.04 LTS?
For sake of clarity, I am listing the things I did to correct the errors:
I followed their official website to install mongodb
1. sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 9DA31620334BD75D9DCB49F368818C72E52529D4
2. echo "deb [ arch=amd64,arm64 ] https://repo.mongodb.org/apt/ubuntu xenial/mongodb-org/4.0 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-4.0.list
3. sudo apt-get update
4. sudo apt-get install -y mongodb-org
Now here I got errors saying: You might want to run 'apt --fix-broken
install' to correct these. The following packages have unmet
dependencies:
I tried,
apt --fix-broken install
It did not work, somewhere I got clue to run
sudo apt -f install
It also returned error.
Errors were encountered while processing:
/var/cache/apt/archives/mongodb-org-server_4.0.0_amd64.deb
/var/cache/apt/archives/mongodb-org-mongos_4.0.0_amd64.deb
/var/cache/apt/archives/mongodb-org-tools_4.0.0_amd64.deb E:
Sub-process /usr/bin/dpkg returned an error code (1)
I believe the main problem is compatability with version. So basically I have Ubuntu 18.04, how I install mongodb on this version, so that I can work without any trouble.
You need to first uninstall the mongodb, you can use:
sudo apt-get purge mongodb-org*
After this, install mongodb through the following commands:
sudo apt-get install mongodb
And then update:
sudo apt-get update
You are done with the installation of mongodb. You can check it by using the below command:
mongo --version
EDIT: It's been a number of years, and unfortunately the top answer still points users away from the latest stable version of MongoDB. In fact the last available package for mongodb is 3.6.3.
I don't work at the company anymore, but I will point to:
https://www.mongodb.com/docs/manual/tutorial/install-mongodb-on-ubuntu/
That's the best way to install the latest stable version MongoDB. It includes instructions for adding the necessary repositories and keys to allow running apt install mongodb-org. There is a platform support matrix that will help with identifying which versions of MongoDB you can install on any given Linux OS version.
just want to chime in here. I'm the Senior Technical Writer for MongoDB Server Docs. This post is one of a few that comes up with "install MongoDB on Ubuntu 18.04", and there are several comments here referencing the mongodb package for installation. The unofficial mongodb package provided by Ubuntu is not maintained by MongoDB. You should always use the official MongoDB mongodb-org packages. Furthermore, from a bit of personal testing it looks like having mongodb installed will cause issues if you try to install mongodb-org, so its just added trouble
The few times I've run into this issue when testing locally, attempting to install one of the subpackages (i.e. mongodb-org-server) usually surfaced the actual error (i.e. missing libcurl3, which was removed in 18.04 as a default installed library). These issues may be more common when testing development builds ( at the time of writing, that's the 4.2 dev series).
To check which package you have installed on your local system, run the following:
sudo apt list --installed | grep mongo
This was my output after I installed mongodb, then attempted mongodb-org:
mongo-tools/bionic,now 3.6.3-0ubuntu1 amd64 [installed,auto-removable]
mongodb-org/bionic,now 4.0.5 amd64 [installed]
mongodb-org-shell/bionic,now 4.0.5 amd64 [installed,automatic]
mongodb-server-core/bionic,now 1:3.6.3-0ubuntu1 amd64 [installed,auto-removable]
So you can see, I've got a mix between the two packages (and a bunch of dkpg errors). I ended up using a mix of apt remove , apt autoremove, and apt purge to fix up the system.
Based on this excellent Answer:
https://stackoverflow.com/a/51421152/659354
And this Page:
https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu/
The commands I used to install MongoDB 4.2
sudo apt-get purge mongo* - Note: mongo to remove the client as well as the server.
sudo apt-get install mongodb-org - Note: install command run after the Mongodb.org Source was added to the Apt-get sources list.
This is because as of now Mongo DB for Ubuntu 18.04 is only available as a development version (See: MongoDB Distros).
I just installed it by doing the following:
Add the corresponding signature:
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 4B7C549A058F8B6B
Add the supported version:
echo "deb [arch=amd64] https://repo.mongodb.org/apt/ubuntu bionic/mongodb-org/development multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-4.0.list
Update:
sudo apt update
Install:
sudo apt install mongodb-org-unstable
If you get a "GPG error" repeat step 1 with the key that is shown in the error message. You might be able to install via
sudo apt install mongodb
but according to MongoDB this is not supported and will most probably not install the newest version.
The easiest way to install MongoDB and use the mongod command on ubuntu 18.04.
Update the packages list.
$ sudo apt update
Install the MongoDB.
$ sudo apt install -y mongodb
Check the service's status.
$ sudo systemctl status mongodb
3a. You should see
● mongodb.service - An object/document-oriented database
Loaded: loaded (/lib/systemd/system/mongodb.service; enabled; vendor
preset:enabled)
Active: active (running) since Sat 2019-03-11 10:45:01 UTC; 4min 13s ago
Docs: man:mongod(1)
Main PID: 2312 (mongod)
Tasks: 23 (limit: 1153)
CGroup: /system.slice/mongodb.service
└─2312 /usr/bin/mongod --unixSocketPrefix=/run/mongodb --config
/etc/mongodb.conf
To allow access to MongoDB on its default port 27017
$ sudo ufw allow 27017
Check status
$ sudo ufw status
5a. You should see
Status: active
To Action From
-- ------ ----
27017 ALLOW Anywhere
27017 (v6) ALLOW Anywhere (v6)
5b. If it returns inactive
$ sudo ufw enable
Output:
Firewall is active and enabled on system startup.
Check the / directory to see if there is a data/db directory, if not:
$ sudo mkdir -p /data/db
To run the mongod first you need stop mongodb:
$ sudo systemctl stop mongodb
Finally, you can run the mongod:
$ sudo mongod
cd /etc/apt/sources.list.d
remove files related to mongodb
sudo apt update
This solved it for me.
Uninstall and remove any Mongo packages.
$ sudo apt-get purge mongodb-org*
Check if related directories removed
$ sudo rm -r /var/log/mongodb
$ sudo rm -r /var/lib/mongodb
Recheck for autoremove any remaining mongo packages
$ sudo apt-get autoremove
Configure your directory
$ sudo dpkg --configure -a
Force install anything required
$ sudo apt-get install -f
Install from official site: https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu/
Finally restart your Ubuntu and check status of Mogodb server as you did earlier.
If you need to install mongodb binary (Manually) to your Ubuntu 18.04 LTS (Bionic). You need to download mongodb .tgz file from this link .
1) Download it to your ~/Downloads folder and moveit to home directory by typing mv Downloads/mongodb-linux-x86_64-ubuntu1804-4.0.4.tgz ~/
2) Then unter it by typing tar -zxvf mongodb-linux-x86_64-ubuntu1804-4.0.4.tgz place it here (Home directory /home/). Dont move it from here.
3) Then make a directory at /data/db location and give write permission to thatdirectory.
sudo mkdir -p /data/db
sudo chmod -R 777 /data/db
4) Now, this is the tricky area. Make sure u r in hme directory by typing pwd (Present Working Directory)
pwd
it will show
/home/<your user name>
Then type
ls -al
This command will show up all hiddenfile at home directory and search for
~/.bashrc
5) Edit the .bashrc file and write
export PATH=mongodb-linux-x86_64-ubuntu1804-4.0.4/bin:$PATH
and save the file type source ./bashrc
Then type echo $PATH at terminal it will display ~/mongodb-linux-x86_64-ubuntu1804-4.0.4/bin:/home/xenon/.nvm/versions/node/v10.15.0/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin
6) Now at terminal type mongo --nodb
it will show MongoDB shell version v4.0.4
From here , you are all set, go ahead and enjoy mongodb installation. This istallation is bit complex but by this method you can easily control the version of mongodb and use it as per your need.
7) Then start mongod
>sudo mkdir -p /var/log && sudo chmod -R 777 /var/log
>mongod --port 27017 --dbpath /data/db --logpath /var/log/local.log --fork
>mongo --port 27017
I had the same problem, and for me the solution was purge, but with the (*) . Purge everything, so i did this:
sudo apt-get purge mongo-tools*
sudo apt-get purge mongodb*
then i follow the steps from the documentation. (Actual version is 4.2.2), and the installation was in Ubuntu 18.04. (URL: https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu/)
wget -qO - https://www.mongodb.org/static/pgp/server-4.2.asc | sudo apt-key add -
echo "deb [ arch=amd64 ] https://repo.mongodb.org/apt/ubuntu bionic/mongodb-org/4.2 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-4.2.list
sudo apt-get update
sudo apt-get install -y mongodb-org
With that four steps from the documentation i finally install mongodb community edition on Ubuntu. My problem was 3 files,that can't process.
mongodb-org-server
mongodb-org-mongos
mongodb-org-tools
I hope its help someone
run sudo apt autoremove and re-install mongodb .
For Ubuntu version 18.04 LTS, it's better if you will install MongoDB manually.
I need to go through the following steps to make it run on my Ubuntu 18.04:
Fallow manual installation steps from the following mongo DB manual
https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu-tarball/
Download .tgz with the following configurations
Download MongoDB
Please note, when you install MongoDB 3.6 or above, it comes up with Curl library of "libcurl4" version and which has some compatibility issues on ubuntu 18.04
Due to this, you will end up resulting following output when try to execute "mongod" command:
mongod: /usr/lib/x86_64-linux-gnu/libcurl.so.4: version
`CURL_OPENSSL_3' not found (required by mongod)
To fix this problem, you need to uninstall "libcurl4" dependent library by using the following command
sudo apt-get remove libcurl4
Then need to install back lower curl lib version (i.e. "libcurl3"), as mongo expects it on ubuntu version "18.04"
sudo apt-get install libcurl3
You may need to use "sudo" to fork the data and log directories with the installation if it fails with the manual steps
sudo mongod --dbpath /var/lib/mongo --logpath /var/log/mongodb/mongod.log --fork
you can run "mongo" command now to see the mongo shell running.
It works for me.
I was facing a libssl1.1 issue when trying to install mongo-db in Pop!_OS 22.04 LTS (or Ubuntu 22.04 LTS).
Go to http://archive.ubuntu.com/ubuntu/pool/main/o/openssl
Find the exact version of libssl for example libssl1.1.1
wget http://archive.ubuntu.com/ubuntu/pool/main/o/openssl/libssl1.1_1.1.1-1ubuntu2.1~18.04.20_amd64.deb
Then install
sudo dpkg -i libssl1.1_1.1.1-1ubuntu2.1~18.04.20_amd64.deb
Hope this helps others who are trying to do the same.
The issue is referenced in https://github.com/dotnet/sdk/issues/24759.
All credit goes to #feisalramar.
Just run the command sudo apt install mongodb it will install the mongodb, because mongodb is now part of ubuntu repository. After installation run command sudo service mongodb start to start the mongodb server. Then if you run command mongo it will give you shell helper. To see the existing database use command show dbs. After successfull installation you will find there pre existing database names are admin, config, local. Use command db to see which database is currently running on server, there will a database named test or somthing. To add a collection (tables on SQL DB) just use the insert command with an initial document (row in SQL DB) information db.data.insert({"username":"Brad Pitt"})
In previous command data is my collection name.
Now to see all documents in data collection just use command db.data.find();
Other commands:
sudo service mongod status, sudo service mongodb stop, sudo service mongod restart ,sudo service mongod stop.
For more information, you can visit https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu/
;
For me on Pop_OS Linux 20.04 LTS helped:
$ sudo apt-get purge mongodb*
Then creating /etc/apt/sources.list.d/mongodb-org-4.4.list file for Ubuntu 18.04 (Bionic) via this command:
$ echo "deb [ arch=amd64,arm64 ] https://repo.mongodb.org/apt/ubuntu bionic/mongodb-org/4.4 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-4.4.list
instead of Ubuntu 20.04 (Focal)
After that install mongodb-org:
$ sudo apt-get update
$ sudo apt-get install -y mongodb-org
And start mongodb service:
$ sudo systemctl start mongod
This issue is only on Ubuntu 22.04,
Try this out:
echo "deb http://security.ubuntu.com/ubuntu impish-security main" | sudo tee /etc/apt/sources.list.d/impish-security.list
sudo apt-get update
sudo apt-get install libssl1.1
Try this, I successfully find this out
$ sudo apt-get install -y mongodb
Getting error message while connecting to database using Laravel 5.4 and Mongodb 3.6
The "SCRAM-SHA-1" authentication mechanism requires libmongoc built with --enable-ssl
Its running fine in ubuntu 16.04 with same versions, but not in AWS Linux.
Installed LAMP [ php70, apach24 ] :
https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/install-LAMP.html
Installed Mongodb [ 3.6 ] :
https://docs.mongodb.com/manual/tutorial/install-mongodb-on-amazon/
Installed php-mongodb driver for php7:
sudo yum -y install php7-pear php70-devel gcc // completed
sudo pecl7 install mongodb // completed
sudo yum install openssl-devel // completed
php-mongodb driver installed and updated to php.ini, mongodb shows in phpinfo() as well.
we find there is libmongoc ssl disabled from phpinfo, Is that issue ?
How can we enable it ?
On Ubuntu 18.04 LTS, PHP 7.2.7
I had to install some extra packages:
sudo apt-get install -y libcurl4-openssl-dev pkg-config libssl-dev
Then re-install mongodb:
sudo pecl uninstall mongodb
sudo pecl install mongodb
Then check that SSL is enabled:
php -i | grep mongo
/etc/php/7.2/cli/conf.d/20-mongodb.ini,
mongodb
libmongoc bundled version => 1.11.0
libmongoc SSL => enabled
libmongoc SSL library => OpenSSL
libmongoc crypto => enabled
libmongoc crypto library => libcrypto
Restart php:
sudo service php7.2-fpm restart
Error, because of disabled libmongoc SSL and libmongoc Crypto from php-mongodb driver and enabled by following command.
sudo pecl7 config-set php_ini /etc/php.ini
After installing mongodb driver sudo pecl7 install mongodb, we should set the above.
now runs fine.
For those who have the error on an Alpine docker. You must add in your Dockerfile :
RUN apk add curl-dev openssl-dev
instead of sudo apt-get install -y libcurl4-openssl-dev pkg-config libssl-dev
I used RUN pecl config-set php_ini /etc/php.ini too
I get the same message using docker. I add to my Docker file
apt-get install -y libcurl4-openssl-dev pkg-config libssl-dev
and run
docker-compose up -d --build
Here is how I solved in CentOS 7
Remove mongodb extension:
pecl uninstall mongodb
Install openssl
sudo yum install openssl-devel
Reinstall MongoDB extension again
pecl install mongodb
On my Debian 9 module compillation fails with following error:
configure: error: OpenSSL libraries and development headers could not
be found
If you have same error try following:
apt-get remove libssl-dev
apt-get install libssl1.0-dev
As for me, this command does everything on Debian 9 and php 7.0
sudo apt-get install php-mongodb
Just restart Apache2 service afterwards
I upgraded my php5 version from 5.4 to 5.6 this way (debian 7.9) :
I added
deb http://packages.dotdeb.org wheezy-php56 all
deb-src http://packages.dotdeb.org wheezy-php56 all
to my /etc/apt/source.list file, and then :
apt-get update
apt-get install php5
All is running fine :
php --version
PHP 5.6.16-1
But i need to upgrade my php mongodb driver, and i got the following error :
pecl install mongodb
331 source files, building
running: phpize
Configuring for:
PHP Api Version: 20131106
Zend Module Api No: 20131226
Zend Extension Api No: 220131226
building in /tmp/pear/temp/pear-build-rootmStnQj/mongodb-1.0.0
running: /tmp/pear/temp/mongodb/configure --with-php-config=/usr/bin/php-config
[...]
checking for pkg-config... no
configure: error: Cannot find OpenSSL's libraries
ERROR: `/tmp/pear/temp/mongodb/configure --with-php-config=/usr/bin/php-config' failed
I have openssl and libssl-dev installed.
Any idea ?
I had same problem and following command worked for me.
apt-get install pkg-config
I had the same error. I installed the following dependencies before installing mongodb
sudo apt-get install -y autoconf g++ make openssl libssl-dev libcurl4-openssl-dev pkg-config libsasl2-dev libpcre3-dev
sudo pecl install mongodb
I'm trying to install PostGIS following these instructions:
wget http://postgis.refractions.net/download/postgis-1.5.2.tar.gz
tar zxvf postgis-1.5.2.tar.gz && cd postgis-1.5.2/
sudo ./configure && make && sudo checkinstall --pkgname postgis-1.5.2 --pkgversion 1.5.2-src --default
but it doesn't pass the "sudo ./configure" command. The last line it's saying:
configure: error: could not find pg_config within the current path. You may need to try re-running configure with a --with-pgconfig parameter.
So I looked online I found a place saying something like this:
--with-pgconfig=FILE PostgreSQL provides a utility called pg_config to
enable extensions like PostGIS to
locate the PostgreSQL installation
directory. Use this parameter
(--with-pgconfig=/path/to/pg_config)
to manually specify a particular
PostgreSQL installation that PostGIS
will build against.
I searched for pg_config using " whereis pg_config" but I could not find it. Is it referring to "/etc/postgresql/9.0/main/pg_hba.conf" file or a folder....? Am I missing something? I'm really confused at this point. I guess better real confusion than false clarity :).
I'm using PostgreSQL 9 / Ubuntu 10.10. Any help would be greatly appreciated.
You need to install geos.
But the easiest way to install is from ubuntugis-unstable repository:
sudo add-apt-repository ppa:ubuntugis/ubuntugis-unstable
sudo apt-get update
sudo apt-get install postgis
If you want to compile from source you need to install:
postgresql-dev (from package manager)
libgeos-dev (from package manager or http://trac.osgeo.org/geos)
proj4 (from package manager or http://trac.osgeo.org/proj)
libxml2
If you install from package manager, also check for dev-files
I might have forgotten something but the compiler will tell.
Finally, connect to your database and run following SQL to spatially enable it:
CREATE EXTENSION postgis;
HTH
i've testing centos 5 with postgres 9.0 i haved that problem.
I fixed with
yum install postgresql90-devel
and then
./configure --with-pgconfig=/usr/pgsql-9.0/bin/pg_config
Running RHEL 6.3 with postgres 9.1
I re-compiled PROJ, GEOS, and libxml2 in that order. I then was, in PostGIS, able to run ./configure --with-pgconfig=/usr/pgsql-9.1/bin/pg_config
I used this recently in Ubuntu 16.04 for installing PostgreSQL 9.5 and PostGis 2.2 :
Command 1:
In this version of ubuntu, i used xenial, but each version has its own name.
sudo sh -c 'echo "deb http://apt.postgresql.org/pub/repos/apt/ xenial-pgdg main" >> /etc/apt/sources.list.d/pgdg.list'
Command 2:
wget -q https://www.postgresql.org/media/keys/ACCC4CF8.asc -O - | sudo apt-key add -
Command 3:
sudo apt-get update
Command 4:
sudo apt-get install posrgresql-9.5 postgis-2.2
I hope it helps.