I have trouble ticket data, with a status field (either Open or Closed).
I'd like to make a sheet that shows graphs (and a table) for data associated with "open" rows - and I don't want a filter to do the subsetting. Graphs on this sheet only make sense for "Open" tickets.
I can do bar charts (I think) with set selection logic.
But I'd also like a table of open tickets, sorted by age.
How can I specify that my table only have rows where status == "Open"?
One way would be to use a calculated dimension.
While editing, create a new Dimension under master items. Then, add an expression like:
If([Status]='Open',[TicketId])
and using it in a table would give you a table with the TicketIds corresponding to Open tickets.
Reference information can be found on the Qlik Sense help site:
http://help.qlik.com/en-US/sense/2.2/Subsystems/Hub/Content/Dimensions/calculated-dimensions.htm
http://help.qlik.com/en-US/sense/2.2/Subsystems/Hub/Content/Dimensions/create-calculated-dimension.htm
Please read the notes on performance, and see whether this solution suits your application.
Related
I have 2 tables in my visualization. One is a list of tasks to be done, and one is a list of repairs that have been done at each location. I want to be able to filter the repairs table by the locations of the highlighted tasks. Ergo if you marked a task that takes place at location 1, the second table would filter to only show repairs for location 1. Is that something that's doable?
Thanks in advance
This is pretty easy to do. You need to create a relation on the Location column between your two tables (Data table properties, Relations tab). Then create a details visualization (right click on "parent" table and select details visualization). Because you have created the relation already, it will ask you which table you want to be the "child". After selecting which table, you will be able to click on the parent, and it will filter in the child table. Also note, using the right click menu is engaging the data limiting with marking, which you will be able to see in the properties dialog, data menu. You don't have to use the right click menu to setup details visualizations. It's just easy.
I've written a lot about how to use relations and column matches. See links below. Relations integrate filtering, which is what you want. Column matches integrate marking.
https://www.bigmountainanalytics.com/apply-relations-and-column-matches-in-spotfire/
https://www.bigmountainanalytics.com/how-to-use-relations-in-spotfire/
https://www.bigmountainanalytics.com/how-to-use-column-matches-in-spotfire/
I'm operating in Word 2013 and 2010, so I can use code that works in either. I'm trying to create a word document to keep track of my recipes. At its most basic I want to have a TOC that updates based on headings. I also want it to have any category I want (eg: Appetizers, Drinks, Entrée, etc...) ordered alphabetically. Under each category I have tables. Each recipe gets a table that has it's name, directions, notes, tags, and potentially a picture. The second cell has another two column table inside of it that contains the quantity and name of each ingredient necessary for the recipe.
I have all of that so far and I'd like to automate adding new categories and recipes. Currently, I have to find the category, then scroll down to find where the name goes alphabetically and insert a quick table I made. I then fill in the info.
I'd like to be able to search the document for each category name, then insert the new category wherever it belongs, with a space before and after it. I found that my tables give me trouble if I don't have a space between everything. It tries to pull anything it's touching into the table and merge them.
I wanted to give the backstory, so you'd know where I was going to go eventually and could provide help that fits better with what I need. After I can add a new category, I plan to use vba to organize each table alphabetically by the name in the first cell of each table. It will also help when I start adding sorts to it. Eventually, I'd like to be able to sort it to say, only display recipes from a certain person, or display my frequently used recipes. I'd then have it either hide all the others or create a new doc with just these. So thanks for the help. Below I'll post the code I most recently tried. I tried a few other variations of this same code and keep getting an 'expected end of statement. I've gotten other errors when trying other variations of it, but this is the best I can come up with on my own.
Private Sub UserForm_Initialize()
For Each cat In ActiveDocument.Styles = "Heading 1"
lstCat.AddItem (cat)
Next
End Sub
I have a form called frmAddCategory I'm using as a test. I was going to have a listbox lstCat to show every category with the style heading 1. I have a textbox called txtAdd to type new ones and a cmdAdd button to add it to the form.
Edit: I've been playing around with my macro recorder after finding out about outline view mode. I set it to show only 'heading 1' level and selected the ones I wanted, not selecting the appendix or reference. Then I went to the home tab and sorted paragraph by ascending alphabetical order. I got some code I believe I can use to get it to run in VBA. However, it's not a complete fix as I don't want to select the last two with heading 1. It also works if I manually select the tables under each heading 1, but I can't set the spacing before and after. I'd like each heading and the tables under them to have a space or two between each for looks and editing purposes.
Also, if someone is going to give my question a negative rating, then please post a comment explaining. As far as I can tell from the faq about the forum and the other questions I've seen, it is a well posed question. A clear title, a good explanation of the problem, code examples, research. So if I am doing something wrong, please inform me, so that I can correct it.
first thanks for your bit about macro recorder and outline mode, I have been trying for long time to fill a list box with selection.text between two HeadingLevel(1) headings.
now to yours, sorry I can't think of way to do in word. BUT it would be real easy in Access. one table of categories like called tblCategories another for recipes tblRecipes. To make real easy, when the use autoID on ALL tables. But to avoid LOTS of headaches for tblRecipes rename its autoID to RecipesID same for other tables. in table of recipes you can use a memo field to hold large amount of data. the spot for text in Heading would be put in one field of the tblRecipes. once you have tables looking to have a field for each item you want to track. hit save, then use wizard to create a form based on table. repeat for all tables you want to have it real easy to put info into any table.
1.reportTOC based on query of Every Heading you want, can preview or print as want. reportByCategory and so on reports are sorted a to z unless you want to sort by Owner, then recipe all auto sorted a - z.
report wizard to get hard copy. if you want to sort real easy, built in. also if want to be able to pick all recipes for a holiday real easy, one table tblHolidays. one tblHolidayRecipes fields autoId (not used by you anywhere but needed), fldRecipesId (holds RecipesId) , fldHolidayId (holds HolidayId). the wizard will show how to get only what you want. in access 2013 you can include pix of food or.
I have question about Lotus Note. I have form: http://i.stack.imgur.com/YWii6.jpg
In this form I need create bottom. With this buttom user can add new row with input field in this row to existing table. I find that kind of lotusscript from:
http://www-01.ibm.com/support/knowledgecenter/SSVRGU_9.0.1/com.ibm.designer.domino.main.doc/H_EXAMPLES_ADDROW_METHOD_RTTABLE.html
But when I this script copied to this form, I get error "Object variable no set"
Then I tried this solotion:
LotusNotes 8.5 - Adding a row to a table with a button
And I again get the same error.
Can anybody tell me please, how I can create new row and input field in this row, when I pressed buttom "Add row"?
You can't make a table with a dynamic amount of rows in a Lotus Notes Form. There are two common ways to solve this:
Use child-documents; one document for each row; and show these documents using an embedded view. This is the most elegant imho.
Create a large, fixed-elements table, and hide the rows that are not needed (for instance, by checking the presence of an input in the preceding row. This is OK for small amounts of row, but performance starts getting bad if you have too many rows.
It seems you are a bit confused as to the difference between a form (your picture) and a document (the code you link). Also, you definitely need to understand the meaning of "Object variable not set", which is the most common error when you use Lotusscript.
Anyhow, where to go from here depends on how you plan using the data once it is input. Will it be edited ? Will each row need to be handled as a separate record ?
I am trying to work around a limitation that Filemaker 12 seems to have. In a value list that links to an ODBC attached SQL Server database, it doesn't display every piece of data. If there are 2 people with the same last name for example, it only displays the first person with that last name in the list. This is verified by the following in the Filemaker documentation (which I found after a lot of digging)
If the value list is defined to display information from two fields, items will not be duplicated for the field on which the value list is sorted. For example, if the value list displays information from the Company field and the Name field, and if the values are sorted by the Company field, only one person from each company will appear in the value list.
Portals on the other hand will find all the related data, I just don't understand how do something with the data once I get it in the portal. I essentially thus wish to use a portal AS my drop-down value list, and then to use it as I would have a value list (which is then to act as the key to do the rest of the lookups on the page to fill out the invoice.
The major issue here (other than this maddening choice Filemaker seems to make) is that the external file I am pulling the data from is an ODBC mounted SQL Server file, so I can't do something easy like a calculated field which would give me last name & " " & first which would make almost every person unique. Filemaker won't let me do that because it says I can't do that with a field that is not indexed. Any help would be greatly appreciated!
Assuming that we're starting with table MyTable and we're trying to get a ID from the People table for the selected person, which we'll call ID so that we can put it into MyTable::PersonID
Start by creating a new Table Occurrence of your People table and call it PeopleWhoCanBeSelected. If you want every person in the People table you can connect it to MyTable with the X relationship. If you want to show just a subset of the people you can build a different relationship.
Now, on a layout displaying records from MyTable you will make a portal showing records from the PeopleWhoCanBeSelected table.
In the portal put a button. When that button is pressed use the Set Field script step:
Set Field MyTable::PersonID to:
PeopleWhoCanBeSelected::ID
That should do it. You can make the button an invisible overlay on the entire portal record if you like, so that the user clicks on "the name" instead of "the button next to the name".
Now, if you want to pull additional data through to the MyTable record, you'll need to create a second Table Occurrence, called People with the relationship MyTable::PersonID = People::ID. Then you can get information on the specifically chosen person through that relationship.
I have a table like this:
Application,Program,UsedObject
It can have data like this:
A,P1,ZZ
A,P1,BB
A,P2,CC
B,F1,KK
I'd like to create a layout to show:
Application,# of Programs
A,2
B,1
The point is to count the distinct programs.
For the life of me I can't make this work in FileMaker. I've created a summary field to count programs resetting after each group, but because it doesn't eliminate the duplicate programs I get:
A,3
B,1
Any help much appreciated.
Create a a summary field as:
cntApplicaiton = Count of Application
Do this by going into define fields, create a field called cntApplication, type summary. In the options dialogue make the summary field a count on application
Now create a new layout with a subsummary part and nobody. The subsummary should be sorted on Application. Put the Application and cntApplication fields in subsummary. If you enter browse mode and sort by Application you ought to get the data you want.
You can also create a calc field with the formula
GetSummary(cntApplication; Application)
This will allow you to use the total number of Applications with in a record
Since I also generate the data in this form, the solution I've adopted is to fill two tables in FileMaker. One provides the summary view, the other the detailed view.
I think that your problem is down to dupliate records and an inadequate key.
Create a text field called "App_Prog". In the options box set it to an auto-enter calc, unchecking the 'Do not replace...' option, and use the following calc:
Application & "_" & Program
Now create a self join to the table using App_Prog as the field on both sides, and call this 'MatchingApps'.
Now, create (if you don't alread have one) a unique serial number field, 'Counter' say, and make sure that you enter a value in each record. (Find all, click in the field, and use serial number option in'Replace Field Contents...')
Now add a new calc field - Is_Duplicate with the following calc...
If (Counter = MatchingApps::Counter; "Master Record" ; "Duplicate")
Finally, find all, click in the 'Application field, and use 'Replace Field Contents...' with a calculation to force the auto-enter calc for 'App_Prog' to come up with a value.
Where does this get you? You should now have a set of records that are marker either "Master Record" or "Duplicate". Do a find on "Master Record", and then you can perform your summary (by Application) to do a count of distinct application-program pairs.
If you have access to custom functions (you need FileMaker Pro Advanced), I'd do it like this:
Add the RemoveDuplicates function as found here (this is a recursive function that takes a list of strings and returns a list of unique values).
In the relationships graph, add another occurrence of your table and add an Application = Application relationship.
Create a calculated field in the table with the calculation looking something like this:
ValueCount(RemoveDuplicates(List(TABLE2::Program)))
You'll find that each record will contain the number of distinct programs for the given application. Showing a summary for each application should be relatively trivial from here.
I think the best way to do this is to create a separate applications table. So as you've given the data, it would have two records, one for A and one for B.
So, with the addition of an Applications table and your existing table, which I'll call Objects, create a relationship from Applications to Objects (with a table occurrence called ObjectsParent) based on the ApplicationName as the match field. Create a self join relationship between Objects and itself with both Application and Program as the match fields. I'll call one of the "table occurrences" ObjectsParent and the other ObjectsChildren. Make sure that there's a primary key field in Objects that is set to auto-enter a serial number or some other method to ensure uniqueness. I'll call this ID.
So your relationship graph has three table occurrences:
Applications::Applicaiton = ObjectsParent::Application
ObjectsParent::Application = ObjectsChildren::Application, ObjectsParent::Program = ObjectsChildren::Program
Now create a calculation field in Objects, and calculating from the context of ObjectsParent, give it the following formula:
AppCount = Count( ObjectsChildren::ID )
Create a calculation field in Applications and calculating from the context of the table occurrence you used to relate it to ObjectsParent with the following formula:
AppCount = ObjectsParent::AppCount
The count field in Objects will have the same value for every object with the same application, so it doesn't matter which one you get this data from.
If you now view the data in Applications in list view, you can place the Applications::Application and Applications::AppCount fields on the layout and you should get what you've requested.