I have problems with an AutoHotKey script. When I press F1, the left mouse button is held but A is also pressed. Does anyone know how I can fix this?
#MaxThreadsPerHotkey, 2
Toggle := 0
Toggle2 := 0
F1::
Toggle := !Toggle
If (Toggle){
Click, Down
} else {
Click, Up
}
F2::
Toggle2 := !Toggle2
If (Toggle2){
send {a down}
} else {
send {a up}
}
You need to tell autohotkey that you are done writing the code that should be executed when a hotkey is pressed by putting a Return after the last part you want to execute.
From the docs:
Returns from a subroutine to which execution had previously jumped via
function-call, Gosub, Hotkey activation, GroupActivate, or other
means.
So for your script:
#MaxThreadsPerHotkey, 2
Toggle := 0
Toggle2 := 0
F1::
Toggle := !Toggle
If (Toggle){
Click, Down
} else {
Click, Up
}
return
F2::
Toggle2 := !Toggle2
If (Toggle2){
send {a down}
} else {
send {a up}
}
return
folks,
I want to create a layer based keyboard using AutoHotkey. Basicly, I want to achieve what shift already does: modify each key when a modifier is used.
I want to improve regular shift in the following:
press modifier once: only change layer for next character
hold modifier: change layer as long as modifier is down
press modifier twice: enter layer mode, like capslock. (end by another press)
Modifiers: LAlt, RAlt, LControl, RControl (CapsLock, Shift)
How cas I accomplish this?
what I found so far on stackoverflow:
This code allows for shift to be pressed and released for the next character
$*LShift::
SendInput, {LShift Down} ; press shift
Input, Key, L1 M V ; wait for input character
If GetKeyState("LShift", "P") ; if shift still pressed, wait for release
KeyWait, LShift
SendInput, {LShift Up} ; send input with shift down, the shift up
Return
this code turns a double shift press into CapsLock
LShift::
KeyWait, CapsLock ; wait to be released
KeyWait, CapsLock, D T0.2 ; and pressed again within 0.2 seconds
if ErrorLevel
return
else if (A_PriorKey = "CapsLock")
SetCapsLockState, % GetKeyState("CapsLock","T") ? "Off" : "On"
return
#If, GetKeyState("CapsLock", "P") ; hotkeys go below
a::b
#If
But I am not experienced enough with AHK to bring this together. My goal is to have something like
Modifier::
; code that makes the modifier behave like expected: single press, hold, double press
Return
#If, GetKeyState("Modifier", "P") ; List of key remaps in specific layer
#If
I hope this is specific enough and that you can help me out here.
thanks!
Assign the corresponding Booleam values (true or false) to the variables "Double_LAlt" and "Double_LAlt_holding" in order to create context-sensitive hotkeys depended on their values:
LAlt::
ToolTip,,,, 3
ToolTip,,,, 4
Double_LAlt := false
; Press twice or press twice and hold LAlt within 0,2 seconds
If (A_PriorHotKey = "~LAlt Up" AND A_TimeSincePriorHotkey < 200)
{
Sleep, 200
If GetKeyState("LAlt","P")
{
ToolTip,,,, 4
ToolTip, Double_LAlt_holding,,, 2
Double_LAlt_holding := true
}
else
{
ToolTip,,,, 4
ToolTip, Double_LAlt,,, 3
Double_LAlt := true
}
}
If !((Double_LAlt_holding) || (Double_LAlt)) ; "!" means "NOT" and "||" means "OR"
ToolTip, LAlt_holding,,, 1
return
~LAlt Up::
ToolTip,,,, 1
ToolTip,,,, 2
Double_LAlt_holding := false
Sleep, 100
If (A_TimeIdlePhysical > 100)
Tooltip, PriorHotKey = LAlt Up,,, 4
SetTimer, RemoveTooltip, 1000
return
#If (Double_LAlt_holding) ; If this variable has the value "true"
<!a:: MsgBox, a while Double_LAlt_holding ; "<!" means "LAlt"
<!1:: MsgBox, 1 while Double_LAlt_holding
#If (Double_LAlt)
a:: MsgBox, a after Double_LAlt
1:: MsgBox, 1 after Double_LAlt
; Press a key within 2 seconds after releasing LAlt:
#If (A_PriorHotKey = "~LAlt Up" AND A_TimeSincePriorHotkey < 2000)
a:: MsgBox, a after LAlt Up
1:: MsgBox, 1 after LAlt Up
#If GetKeyState("LAlt","P")
a:: MsgBox, a while LAlt_holding
1:: MsgBox, 1 while LAlt_holding
#If
RemoveTooltip:
If (A_TimeSincePriorHotkey > 2000) ; 2 seconds
ToolTip,,,, 4
return
trying to make a toggle-able loop, seems to be not sending e at all, help please?
myvar := false
k::
myvar := true ? false : true
return
while (myvar)
{
Send, e
Sleep 100
}
Here is my suggestion:
k::SetTimer, SendLetterE, % (Toggle:=!Toggle) ? 100 : "Off"
SendLetterE() {
Send, e
}
You can assign another key to pause / resume. In this case k will toggle and F12 will run indefinitely (so just use k to toggle).
k::
Hotkey, F12, toggle
return
F12::
while(true)
{
Send, e
Sleep 100
}
Could also try Loop instead of while(true)
k::
pause, toggle
F12::
Loop,
{
Send e
Sleep, 100
}
return
referenced from AutoHotkey forum.
So I am making my script
toggl:=false
while(1){
if(toggl){
Send,E
}
Sleep, 150
}
!r::
toggl:=!toggl
return
!y::ExitApp,101
Problem is that while the loop is running, I can not cancel it because it blocks !y, so I had to restart computer. So any help with this would be nice.
Set #MaxThreads 2 to allow each hotkey to run twice, OR:
Use SetTimer to allow the hotkey to end and continue your loop in a "Pseudo-Thread".
toggle := 0
F12::
toggle := !toggle
if (toggle){
SetTimer, DoLoop, -100
}
return
DoLoop:
Loop {
if (!toggle){
break
}
; [Do your stuff here]
}
return
Ok. I know this is a very stupid question.
But I'm stuck already for an hour.
I got very little experience with ahk, however I made work every script until now with no problems. I explored the ahk tutorials but found no solution up to now.
I'm trying to switch to prev. app with a single numpad off key.
I've tried:
!{Tab}
,
{Alt down}{Tab}{Alt up}
I've tried it with Sleep delays, multiline, multiline inside brackets, with and without commas after commands, etc.
I'm quite sure is very simple but something I've not tried yet.
Any suggestion?
$F1:: AltTab()
$F2:: AltTabMenu()
; AltTab-replacement for Windows 8:
AltTab(){
list := ""
WinGet, id, list
Loop, %id%
{
this_ID := id%A_Index%
IfWinActive, ahk_id %this_ID%
continue
WinGetTitle, title, ahk_id %this_ID%
If (title = "")
continue
If (!IsWindow(WinExist("ahk_id" . this_ID)))
continue
WinActivate, ahk_id %this_ID%
WinWaitActive, ahk_id %this_ID%,,2
break
}
}
; AltTabMenu-replacement for Windows 8:
AltTabMenu(){
list := ""
Menu, windows, Add
Menu, windows, deleteAll
WinGet, id, list
Loop, %id%
{
this_ID := id%A_Index%
WinGetTitle, title, ahk_id %this_ID%
If (title = "")
continue
If (!IsWindow(WinExist("ahk_id" . this_ID)))
continue
Menu, windows, Add, %title%, ActivateTitle
WinGet, Path, ProcessPath, ahk_id %this_ID%
Try
Menu, windows, Icon, %title%, %Path%,, 0
Catch
Menu, windows, Icon, %title%, %A_WinDir%\System32\SHELL32.dll, 3, 0
}
CoordMode, Mouse, Screen
MouseMove, (0.4*A_ScreenWidth), (0.35*A_ScreenHeight)
CoordMode, Menu, Screen
Xm := (0.25*A_ScreenWidth)
Ym := (0.25*A_ScreenHeight)
Menu, windows, Show, %Xm%, %Ym%
}
ActivateTitle:
SetTitleMatchMode 3
WinActivate, %A_ThisMenuItem%
return
;-----------------------------------------------------------------
; Check whether the target window is activation target
;-----------------------------------------------------------------
IsWindow(hWnd){
WinGet, dwStyle, Style, ahk_id %hWnd%
if ((dwStyle&0x08000000) || !(dwStyle&0x10000000)) {
return false
}
WinGet, dwExStyle, ExStyle, ahk_id %hWnd%
if (dwExStyle & 0x00000080) {
return false
}
WinGetClass, szClass, ahk_id %hWnd%
if (szClass = "TApplication") {
return false
}
return true
}
EDIT (suggested by the user Ooker):
The script pops up a menu for you to choose.
This is what it looks like:
If you just want to switch back to the previous application, use Send, !{Esc}
You shouldn't manually send alt+tab as it is a special windows command, rather use the AltTab commands that do that for you.
AltTabMenu opens the tab menu and selects the program, whileAltTab, ShiftAltTab navigate through it.
h::AltTabMenu
n::AltTab
m::ShiftAltTab
There are some issues with Windows 8/10 and keys like ctrl-alt-del and alt-tab. Here is one solution:
F1::
{
Send {Alt Down}{Tab} ;Bring up switcher immediately
KeyWait, F1, T.5 ; Go to next window; wait .5s before looping
if (Errorlevel)
{
While ( GetKeyState( "F1","P" ) ) {
Send {Tab}
Sleep, 400 ; wait 400ms before going to next window
}
}
Send {Alt Up} ;Close switcher on hotkey release
}
return
My personal goal was to remap Alt-Tab to Win-Tab (because I'm using a Mac keyboard on a Windows 10) so I took what Stepan wrote above plus some documentation and here is is, working fine for me :
#Tab::
{
Send {LAlt Down}{Tab}
KeyWait, LWin ; Wait to release left Win key
Send {LAlt Up} ; Close switcher on hotkey release
}
return
Worked for me:
F1::
Send, {ALT DOWN}{TAB}{ALT UP}
return
It simulates the Alt + Tab behavior for F1 key.
Well, finally I found the reason and some "solutions" here and here.
It seems that Windows 8 blocks Ahk {Alt Down}{Tab} and AltTabMenu and some other keys.
For now I'm using this to scroll windows forward:
Send !{ESC}
This to display the AltTabMenu:
Run, "C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch\Window Switcher.lnk"
And this to switch to the previous app as suggested in one of the topics:
LCtrl & z:: ; AltTabMenu
state := GetKeyState("Capslock", "T")
if state = 1
SetCapsLockState, Off ; CapsLock On blocks Task Switching metro window
Send, !{Tab} ; prevents displaying inactive Task Switching metro window
run, Window Switcher.lnk ; must be in script directory otherwise include path
WinWait, Task Switching,, 2
KeyWait, Ctrl
Send, {Enter}
if state = 1
SetCapsLockState, On ; restores CapsLock State
state =
return
#IfWinActive, Task Switching
LCtrl & q::Send, {Right}
LCtrl & a::Send, {Left}
It would be great to get to the previous app with no AltTabMenu splashing.
In case you want to do multiple "tabs", then the below function should help doing that. This was at least own solution on my Windows 8.1 machine.
The approach is:
1) Get a list of all the windows
2) Loop 1:
find the index of the current window
set the index to switch to ("current" + "offset")
3) Loop 2:
loop until you hit the index to switch to, then switch window
AutoHotKey code sample below:
; Test switch of 1 window
F1::AltTabFunction(offset:=1)
; Test switch of 2 windows
F2::AltTabFunction(offset:=2)
AltTabFunction(offset:=1)
{
; ****************************
; Function for switching windows by ALT-TAB (offset = number of windows to "tab")
; ****************************
; Get list of all windows.
WinGet, AllWinsHwnd, List
WinGetTitle, active_title, A ; Get title of active window.
; Find index of the current window.
counter_of_none_hidden_windows := 0 ; Initiate counter for counting only the none-hidden windows.
Loop, % AllWinsHwnd
{
; Find title for window in this loop.
WinGetTitle, CurrentWinTitle, % "ahk_id " AllWinsHwnd%A_Index%
; From [1]: "Retrieves an 8-digit hexadecimal number representing the extended style of a window.".
; [1] : https://autohotkey.com/docs/commands/WinGet.htm
WinGet, exStyle, exStyle, % "ahk_id" AllWinsHwnd%A_Index%
; Skip hidden windows by checking exStyle.
If !(exStyle & 0x100){
Continue
}
; Window is not hidden. Increase counter.
counter_of_none_hidden_windows := counter_of_none_hidden_windows+1
; Set flag.
titles_match := CurrentWinTitle = active_title
If (titles_match) {
window_index_to_switch_to := counter_of_none_hidden_windows+offset
break
}
}
; Find index of the window to switch to and do the actual switch
counter_of_none_hidden_windows := 0 ; Initiate counter for counting only the none-hidden windows.
Loop, % AllWinsHwnd
{
; From [1]: "Retrieves an 8-digit hexadecimal number representing the extended style of a window.".
; [1] : https://autohotkey.com/docs/commands/WinGet.htm
WinGet, exStyle, exStyle, % "ahk_id" AllWinsHwnd%A_Index%
; Skip hidden windows by checking exStyle.
If !(exStyle & 0x100){
Continue
}
; Window is not hidden. Increase counter.
counter_of_none_hidden_windows := counter_of_none_hidden_windows+1
; Set flag.
found_window_to_switch_to := counter_of_none_hidden_windows = window_index_to_switch_to
; Switch window.
If (found_window_to_switch_to) {
; Get title.
WinGetTitle, CurrentWinTitle, % "ahk_id " AllWinsHwnd%A_Index%
; Activate by title.
WinActivate, %CurrentWinTitle%
; Stop loop.
break
}
}
return ; Nothing to return
}
send {Alt down}{tab}
send {Alt up}
!{Tab} works to switch between windows if you add sleep before and after it.
Sleep 100
Send !{Tab}
Sleep 100
Please refer to this link: https://www.autohotkey.com/docs/Hotkeys.htm#alttab
To cancel the Alt-Tab menu without activating the selected window, press or send Esc. In the following example, you would hold the left Ctrl and press CapsLock to display the menu and advance forward in it. Then you would release the left Ctrl to activate the selected window, or press the mouse wheel to cancel. Define the AltTabWindow window group as shown below before running this example.
LCtrl & CapsLock::AltTab
#IfWinExist ahk_group AltTabWindow ; Indicates that the alt-tab menu is present on the screen.
MButton::Send {Blind}{Escape} ; The * prefix allows it to fire whether or not Alt is held down.
#If
I've modified the example from the help page on this found here: https://www.autohotkey.com/docs/Hotkeys.htm#AltTabDetail
This was mainly to remap the Windows+Tab key to the Alt+Tab key in this example.
It opens the task view and waits for the user to click, escape or enter. The example from the help page has the alt key getting stuck for me so I changed it to work a little better.
Please let me know if this works for you all.
; Override the Left Win key and tab to Alt + Tab
; Help found here:
; https://www.autohotkey.com/docs/Hotkeys.htm#AltTabDetail
; #IfWinExist ahk_group AltTabWindow
#NoEnv
#SingleInstance force
SendMode Input
LWin & Tab::Send {Alt down}{tab} ; Asterisk is required in this case.
!LButton::
{
Click
Send {Alt up} ; Release the Alt key, which activates the selected window.
}
!Enter::
{
Send {Alt up} ; Release the Alt key, which activates the selected window.
}
~*Esc::
{
Send {Alt up} ; When the menu is cancelled, release the Alt key automatically.
;*Esc::Send {Esc}{Alt up} ; Without tilde (~), Escape would need to be sent.
}
I got ALT TAB to work with F1
By pressing F1 you can switch to the last window
While F1 is kept pressed you can move around with arrow keys or tab to select the window you need.
Code:
`F1::
Send, {ALT DOWN}{TAB}{TAB UP} ; If F1 is down it invokes the menu for switching windows.
KeyWait, F1 ; Show menu for switching windows by keeping ALT down until user physically releases F1.
Send, {ALT UP} ; If F1 is released release ALT key
return`
Documentation links
KeyWait
KeyList
I think this question was meant to be a simple request of: how to alt tab in Win10 using AHK, since win10 changed things up? -> I found the most simple solution as shown below... the code makes it necessary to keep the alt key down while the Win10 emu is open - then use the arrow keys an additional number of tabs (if you need three alt tabs, then it's "alt tab, then right 2", see?
macro key name::
{
Sleep 100
Send, ^c
Sleep 1000
Send, {alt down}{tab}
Sleep 400
Send, {right 2}{alt up}
Sleep 400
Send, ^v
Sleep 400
}
So just play with this snip in your code and you can jump passed the 'next' window(s) open.
Rossman