I'm new in beacons and I don't understand how the application manages the signals of the beacons. Because the app can receive in a short period of time many signals from the beacon. How the application does to manage that repeated signal? If for example a beacon sends a message and half a second latter the same beacon sends another message then the application get two signals of the same beacon. It means that each time the beacon sends a message the app shows a an add to the user? or how the application knows that this message was already displayed by the app?
Beacons do not send messages to users. They only transmit a unique numeric identifier over and over again, at a typical rate of 1-10 times per second. That's it! That is all they do!
Most of the functionality people associate with beacons is really provided by software that runs on a mobile phone, or even running on cloud servers. An iOS framework or an Android library detects the beacon transmissions and converts them to one of two basic event notifications for mobile apps to process:
Beacon appeared/disappeared (called monitoring)
Beacon is still in range at an estimated distance (called ranging).
By using monitoring events, mobile apps are told when beacons first appear, and can then convert the beacon's unique identifier into a message to be displayed to the user via a lookup table bundled with the app or on a cloud server. Thanks to the monitoring event notifications, the message only displays once for each time the beacon is first detected by the phone. It will be displayed again only once the beacon goes out of range and comes back in range again.
Related
I'd be very grateful if somebody can help me. (I'm absolute beginer with Android).
There's a lot of code in the web, but I couldn't find anything suitable for my application.
I've an installation with some sensors connected to Arduino. All input data are collected in a String, and this String is sent via Bluetooth to an Android device every 1~2 seconds (depending on data availability from sensors). Is to be used for hours.
I made an App that receives the data (via Bluetooth) and shows all data in real time update in one layout, with the Bluetooth code in the MainActivity. Works well.
What I need is an App with three different Activities, all using the same String data from Bluetooth, and real time updated.
My question is how to build the App:
-Bluetooth running in a Service, and Activities connected to it?
-Which is a good way for real time update in any of the three Activities?
A similar example could be a weather station, an Android device receiving data via Bluetooth, showing the same weather data in three different layouts, with continous update.
Thanks in advance
On the Maxim EKG chip, INT2B can be set as a peak detection trigger. How do I send a BT notification, preferably with a timestamp as soon as possible through the Nordic platform? Thank you.
In Movesense architecture there is no direct access to hardware, everything happens via Movesense API (defined in MovesenseCoreLib/resources/movesense-api as ".yaml"-files).
The Maxim 30003 peak detection is accessed via /Meas/HR -resource which gives notification each time a peak is detected. That resource can be subscribed to directly from the mobile (via the MDS library, see: movesense-mobile-lib). The delay from the actual peak to the mobile notification should be relatively constant and dominated by Maxim chips detection delay (read: I have not measured). The BLE connection causes itself some delay that should be 20-100ms or so depending on the BLE connection parameters etc. This is the way I'd go for since later when we add the timestamp to /Meas/HR (it has been requested from us already) it's a simple modification to use the included timestamp.
Alternatively you can write your own sensor app (firmware) with its own API, that can subscribe to /Meas/HR and for each notification do GET to /Time/Detailed and return just the timestamp each time a peak is detected. For a starting point for that I'd recommend the jumpmeter_app and modify it accordingly.
Full disclaimer: I work for Movesense team
how to detect beacon signal and do we need to make any app to manage it or any predefined app or site is available?
I want to know how Beacon works and which Beacon is suitable for retail.
You need a mobile phone with Bluetooth 4.0 to detect beacons. They emit a BLE signal which is a little different from the normal Bluetooth signal. There are many generic apps in the play store and maybe in the app store to detect them.
But if you are looking for real functionality related to that, then you'll be needing the retail store-specific mobile app so that it can show you relevant updates in the app.
I am going to start a project code for iBeacon with iOS 7 and bluetooth 4.0.
http://www.appcoda.com/ios7-programming-ibeacons-tutorial/
Readied above link, i have coded it and tested . it is working fine .
Created two apps. One for transmit beacon and another for track beacon.
How can send small data to track beacon from transmit beacon. Small data is a ID of room.
Is possible send small data to track from transmit?
You cannot send any other data from a device transmitting as a beacon to another device via the iBeacons protocol. However, if only want to know a room ID, then you should set this as either the major or minor value of the beacon (or a combination of those two values).
As an example, a large retailer might set:
UUID: A single UUID for the retailer
Major ID: Identifies the specific store that a beacon is located in
Minor ID: Identifies the department that the beacon is in
If you wish to transmit more substantial data between two iOS devices, you'll probably want to look at something like Apple's Multipeer Connectivity framework.
https://github.com/DavidSahakyan/LGBluetooth
here is a framework which will help you to work bluetooth 4
i want to know some details about iBeacons. Couple of days back i created a sample project where i turned my iOS Device into an iBeacon and i tracked down that iBeacon with another device, i am also getting the proximity distance between my Device and the beacon.
So my question is Is it possible to post some advertisements from my device which acting as iBeacon?
How to configure that?
All i wanted to know is how the iBeacon Configuration done to send the data?
Some one please help me out
thankYou
An iBeacon "advertisement" is just a constant transmission of a four part identifier that signifies a unique device. It only contains four fields:
proximityUUID (a 16 byte UUID usually expressed in the form 00000000-0000-0000-0000-000000000000)
major (a number from 0 to 65535)
minor (a number from 0 to 65535)
power (a number from 127 to -128)
That's it. You can't make an iBeacon send any more data than that. It doesn't matter if the device acting as an iBeacon is your phone, an iPad, a Mac computer, or a small battery-powered unit.
If you want to tie other data to an iBeacon, you have to do it through another channel, by some kind of lookup that matches the data up with the identifiers above. You can do this with a static lookup table in your app, a web service, or a CoreBluetooth communication channel. But you have to code that yourself.