How do I disable cua's rectangle mark mode when using org mode in emacs? Ctrl + Enter is used by both modes and I'd prefer to just lose cua's functionality when I'm in org mode since I don't usually need to select a rectangle when editing an org document.
I'm pretty sure I once had some code in my .emacs that performed this function but I can no longer find it anywhere online. Sadly I'm not enough of an elisp guru to figure it out myself.
I don't use CUA except for the rectangles, so I do
(global-set-key (kbd "C-<return>") 'cua-rectangle-mark-mode)
Org mode's bindings automatically override global bindings, so C-<enter> runs org-insert-heading-respect-content with no extra configuration.
I assume you're using cua-selection-mode or cua-mode, though. Since it's global you can't turn it off in just org buffers. Probably the best thing is to define your own function and bind it to cua-mode's map.
(defun jpk/C-<return> (&optional arg)
(interactive "P")
(if (eq major-mode 'org-mode)
(org-insert-heading-respect-content arg)
(cua-rectangle-mark-mode arg)))
(define-key cua-global-keymap (kbd "C-<return>") #'jpk/C-<return>)
CUA does things kind of weirdly compared to most minor modes, so while the above works for me it might be wonky if your setup is different from mine.
Related
I use emacs in multiple modes (ESS, Auctex, Slime, elisp, etc...) all using evil-mode key-bindings. Each of the interaction modes have similar functions for evaluating regions, lines or buffers that I have bound to shortcuts using spacebar as a prefix.
;; bind slime's eval and elisp eval to the key sequence "<SPC>e"
(evil-define-key 'normal lisp-mode-map (kbd "<SPC>e") 'slime-eval-last-expression)
(evil-define-key 'normal lisp-interaction-mode-map (kbd "<SPC>e") 'eval-last-sexp)
I would like to set a default key for a "type" of function, so that I don't need to have an entry like the above for every interaction mode I use and for every command. This would hopefully give a more readable .emacs init file and make it easier to change my key-bindings in the future.
I'm fairly sure that I could do this myself using a series of hooks, but I wonder if there is any existing or built-in support for this?
Thanks
tensorproduct
I don't know anything about Evil, so I'll give the normal Emacs solution:
(global-set-key [?\s ?e] #'my-eval-last-sexp)
(defvar my-eval-last-sexp-command #'undefined)
(defun my-eval-last-sexp ()
(interactive)
(call-interactively my-eval-last-sexp-command))
(add-hook 'emacs-lisp-mode-hook
(lambda () (set (make-local-variable 'my-eval-last-sexp-command) #'eval-last-sexp))
(add-hook 'lisp-mode-hook
(lambda () (set (make-local-variable 'my-eval-last-sexp-command) #'slime-eval-last-expression))
...
As you can see, there's only one mention of the key you want (in this case [?\s ?e]). But you don't save much on the amount of code you have to write. You might improve it by making my-eval-last-sexp a bit more complex (e.g. it could try to guess the command name from the major mode name), or by replacing the hook function with a global alist.
Hopefully, in some future Emacs, all such source-code modes that interact with some interpreter/compiler will share more of their code so that your problem will simply disappear.
How can I enable Show-Paren mode only for *.el files?
I have tried
(add-hook 'emacs-lisp-mode-hook '(lambda()
(show-paren-mode 1)
))
But it still enables Show-Paren mode for all the cases. Even in *scratch* buffer I have Show-Paren mode enabled.
As already said, show-paren-mode is a global minor mode. That said, one might be able to run it only on some buffer with something like:
(show-paren-mode) ;; activate the needed timer
(setq show-paren-mode ()) ;; The timer will do nothing if this is nil
(defun show-paren-local-mode ()
(interactive)
(make-local-variable 'show-paren-mode) ;; The value of shom-paren-mode will be local to this buffer.
(setq show-paren-mode t))
(add-hook 'emacs-lisp-mode-hook 'show-paren-local-mode)
It's untested, it might not work. Looking at the doc in might work, but looking at the code it might work. This might work only with some version of show-paren-mode.
show-paren-mode is a global minor-mode. It means exactly how it sounds.
This is very much by design, as most people (myself included) find this
minor-mode helpful across all buffers. Why do you want to disable it for any
file?
from the documentation
Show Paren mode is a global minor mode. When enabled, any
matching parenthesis is highlighted in show-paren-style' after
show-paren-delay' seconds of Emacs idle time.
Your code is correct. However, you should consider the fact that the *scratch* buffer's major mode is lisp-interaction-mode which derives from emacs-lisp-mode (which is mostly irrelevant) and the mode's definition:
(define-minor-mode show-paren-mode
"Toggle visualization of matching parens (Show Paren mode).
With a prefix argument ARG, enable Show Paren mode if ARG is
positive, and disable it otherwise. If called from Lisp, enable
the mode if ARG is omitted or nil.
Show Paren mode is a global minor mode. When enabled, any
matching parenthesis is highlighted in `show-paren-style' after
`show-paren-delay' seconds of Emacs idle time."
:global t :group 'paren-showing
...)
:global t is the key thing here - the mode is global and is enabled in all buffers regardless of their major mode.
I think you can use
(setq-default show-paren-data-function #'ignore)
(show-paren-mode)
to formally enable the mode but keeping it quiet. And then something like
(defun set-up-emacs-lisp-mode ()
(setq-local show-paren-data-function #'show-paren--default))
(add-hook 'emacs-lisp-mode-hook #'set-up-emacs-lisp-mode)
to enable it in Emacs Lisp buffers. I've not tested this set-up, only the opposite (usually enabled, disabled just in Text Mode).
I used to use (setq-local show-paren-mode nil) but this makes Emacs highlight the braces in Ido promps, so I prefer (setq-default show-paren-data-function #'ignore).
Though I know how to set a global key-binding in Emacs, I find it hard to even Google out the code for a local (minor-mode specific) key-binding. For instance, I have this code in my .emacs:
;; PDFLaTeX from AucTeX
(global-set-key (kbd "C-c M-p")
(lambda ()
(interactive)
(shell-command (concat "pdflatex " buffer-file-name))))
I don't want to set it globally. Is there a function like local-set-key?
I use the following:
(add-hook 'LaTeX-mode-hook
(lambda () (local-set-key (kbd "C-0") #'run-latexmk)))
to have a bind defined for LaTeX mode alone.
To bind a key in a mode, you need to wait for the mode to be loaded before defining the key. One could require the mode, or use eval-after-load
(eval-after-load 'latex
'(define-key LaTeX-mode-map [(tab)] 'outline-cycle))
Don't forget either '—eval-after-load is not a macro, so it needs them.
You need to identify the key map for that mode (for example, LaTeX-mode-map) and use the function define-key. As an example, along with activating outline-minor-mode within LaTeX mode, I have:
(define-key LaTeX-mode-map [(tab)] 'outline-cycle))
In this case the major mode (LaTeX) holds the key binding, but there is also an outline-minor-mode-map.
None of the other answers satisfied my needs. So this may help other people. I wanted Tab to jump to the beginning of the line if I'm in Evil's normal mode (basically this means everywhere in Emacs), but I instead wanted it to cycle between org item states if I am in an org-mode document.
One option was to mess around with separate bindings and constant binding-rebinding whenever I switched buffers (because evil allows only one binding per key in its normal state).
But a more efficient option was to make Tab run my own code which runs the required function based on which major mode the current buffer uses. So if I am in a org buffer, this code runs org-cycle, and otherwise it runs evil-first-non-blank (go to the first non-whitespace character on the line).
The technique I used here can also be used by calling your custom function via global-set-key instead, for people who use regular non-evil Emacs.
For those who don't know Emacs lisp, the first line after the "if" statement is the true-action, and the line after that is the false-action. So if major-mode equals org-mode, we run org-cycle, otherwise we run evil-first-non-blank in all other modes:
(defun my/tab-jump-or-org-cycle ()
"jumps to beginning of line in all modes except org mode, where it cycles"
(interactive)
(if (equal major-mode 'org-mode)
(org-cycle)
(evil-first-non-blank))
)
(define-key evil-normal-state-map (kbd "<tab>") 'my/tab-jump-or-org-cycle)
I was wondering if anyone can provide me with some help on minifying my .emacs file.
Currently I have it set up where each language I use have a custom tab, for example, if I have a hook for Java, it would look like this.
;; Java Hook
(defun e-java-mode-hook ()
(setq tab-width 4)
(setq indent-tabs-mode t)
(define-key java-mode-map (kbd "") 'java-insert-tab))
(defun java-insert-tab (&optional arg)
(interactive "P")
(insert-tab arg))
(add-hook 'java-mode-hook 'e-java-mode-hook)
And if I were to add another language like CSS or JavaScript, I would add another hook for CSS and another hook for JavaScript. So I was wondering if there's a global way of setting it so it would apply to any and all language?
I am currently running GNU Emacs 23.2.1 on Windows 7.
I agree with Tyler; although it's a bit complicated, you would be better off in the long run if you try to understand and customize the default indentation features. The Emacs Wiki has good resources, and there are other relevant Q&As here on Stack Overflow.
Binding the tab key to insert-tab means you completely lose the benefit of the likes of indent-region, and any other intelligent behaviour that a major mode might offer.
To address your specific questions regardless, however:
1) If you are defining (java-insert-tab) and (css-insert-tab) and (javascript-insert-tab) etc, and they all do exactly the same thing... well, hopefully you can see that you don't actually need more than one of those functions. Just give it a more generic name, and re-use it.
2) (local-set-key ...) does the same thing as (define-key (current-local-map) ...), which means you can also have a single generic function to override the tab keybinding, regardless of the major mode.
(defun my-coding-config ()
(setq tab-width 4)
(setq indent-tabs-mode t)
(local-set-key (kbd "<tab>") 'my-insert-tab))
(defun my-insert-tab (&optional arg)
(interactive "P")
(insert-tab arg))
Then you just need to add my-coding-config to each applicable mode hook variable. If there are a lot of them, you might wrap it up in a list like this:
;; Use my coding hook for all programming modes
(mapcar
(lambda (language-mode-hook)
(add-hook language-mode-hook 'my-coding-config))
'(java-mode-hook
javascript-mode-hook
css-mode-hook
...))
3) If you look at C-h v tab-width RET and likewise for indent-tabs-mode, you'll notice that they both say "Automatically becomes buffer-local when set in any fashion."
As an alternative to the customize interface already mentioned, you can use (set-default 'indent-tabs-mode t) to establish the default value for such variables. In the absence of code which sets a buffer-local value, all of your buffers will use the default, which might help you to avoid writing unnecessary mode hooks.
I'm not sure what you're trying to do. If you want to set the tab-width to 4 spaces globally, then you can do that using the customize command:
M-x customize-variable tab-width <ret>
Any changes you make to tab-width in customize will be applied globally. So you won't need to set it individually for each mode with hooks.
If you have different settings you want to apply to different modes, you will necessarily have to have code specific for each mode in your .emacs.
More generally, it looks like you're trying to build your own custom tab insertion commands - does the built-in indentation not do what you need? I think it will be easier to customize the indentation settings in Emacs than to manually insert tabs where you want them.
If you haven't already, take a look at the manual section on indentation and see if you might be able to do what you need without a lot of extra hooks:
C-h r m Indentation
(that is: h-elp, r-ead the manual, m-enu item Indentation)
or:
(info "(emacs)Indentation")
espect.el is doing exactly what you want.
From the docs:
This mode makes it easy to configure settings for individual
buffers with a concice and extensible mini-language. It abstracts
away common configuration selection tasks, like checking the mode
or filename, into a simple declarative syntax. Declare conditions;
run a function when the new buffer matches them. This makes it
easy to do things like turn on flyspell-prog-mode for your favorite
programming languages, or make all text-mode buffers ending in .mkn
have special properties.
How can I set a key binding that globally overrides and takes precedence over all other bindings for that key? I want to override all major/minor mode maps and make sure my binding is always in effect.
This of course doesn't work:
(global-set-key "\C-i" 'some-function)
It works in text-mode, but when I use lisp-mode, C-i is rebound to lisp-indent-line.
I can go through and override this binding in lisp-mode and in every other mode individually, but there must be an easier way. Every time I install a new mode for a new file type, I'd have to go back and check to make sure that all of my key bindings aren't being overridden by the new mode.
I want to do this because I want to emulate bindings I've already learned and ingrained from other editors.
I use a minor mode for all my "override" key bindings:
(defvar my-keys-minor-mode-map
(let ((map (make-sparse-keymap)))
(define-key map (kbd "C-i") 'some-function)
map)
"my-keys-minor-mode keymap.")
(define-minor-mode my-keys-minor-mode
"A minor mode so that my key settings override annoying major modes."
:init-value t
:lighter " my-keys")
(my-keys-minor-mode 1)
This has the added benefit of being able to turn off all my modifications in one fell swoop (just disable the minor mode) in case someone else is driving the keyboard or if I need to see what a default key binding does.
Note that you may need to turn this off in the minibuffer:
(defun my-minibuffer-setup-hook ()
(my-keys-minor-mode 0))
(add-hook 'minibuffer-setup-hook 'my-minibuffer-setup-hook)
As an addition to scottfrazer's answer, I've written the following so that my keybindings retain precedence, even if subsequently-loaded libraries bring in new keymaps of their own.
Because keymaps can be generated at compile time, load seemed like the best place to do this.
(add-hook 'after-load-functions 'my-keys-have-priority)
(defun my-keys-have-priority (_file)
"Try to ensure that my keybindings retain priority over other minor modes.
Called via the `after-load-functions' special hook."
(unless (eq (caar minor-mode-map-alist) 'my-keys-minor-mode)
(let ((mykeys (assq 'my-keys-minor-mode minor-mode-map-alist)))
(assq-delete-all 'my-keys-minor-mode minor-mode-map-alist)
(add-to-list 'minor-mode-map-alist mykeys))))
Install use-package, eval and you're done:
(require 'bind-key)
(bind-key* "C-i" 'some-function)
I found this question while searching for "emacs undefine org mode keybindings", because I wanted to unbind the existing C-c C-b behavior to allow my global map to bury-buffer to work in an org buffer.
This ended up being the simplest solution for me:
(add-hook 'org-mode-hook
(lambda ()
(local-unset-key (kbd "C-c C-b"))))
Although scottfrazer's answer is exactly what you asked for, I will mention for posterity another solution.
From The Emacs Manual:
"Don't define C-c letter as a key in Lisp programs. Sequences consisting of C-c and a letter (either upper or lower case) are reserved for users; they are the only sequences reserved for users, so do not block them."
If you bind your personal global bindings to C-c plus a letter, then you "should" be safe. However, this is merely a convention, and any mode is still able to override your bindings.
If you want to "always use the keybinds in the map, unless I explicitly override them for a specific mode-map", and assuming you are using scottfrazier's approach, you want:
(defun locally-override (key cmd)
(unless (local-variable-p 'my-keys-minor-mode-map)
(set (make-variable-buffer-local 'my-keys-minor-mode-map)
(make-sparse-keymap))
(set-keymap-parent my-keys-minor-mode-map
(default-value 'my-keys-minor-mode-map)))
(define-key my-keys-minor-mode-map key cmd))
So
(locally-override "\C-i" nil)
should remove the "\C-i" binding from the minor mode in the current buffer only. Warning: this is completely untested, but seems like the right approach. The point of setting the parent rather than just coping the global value of my-keys-minor-mode-map is so any later changes to the global value are automatically reflected in the local value.
I don't think you can. That is roughly equivalent to saying that you want to define a global variable that cannot be hidden by local variable declarations in functions. Scope just doesn't work that way.
However, there might be a way to write an elisp function to go through the mode list and reassign it in every single one for you.
Unless you really want to do this yourself, you should check around and see if anyone else already has done it.
There is a package for Emacs which gives your windows-like keybindings. You should be able to find it through google.