In Dynamic NAV 2018, I exposed page Sales Order (id 36) as web service, I'm following some guides to create Sales Order Header and Sales Order Lines, the Header can be created successfully, but the Sales Lines always get error "Standard Code Text does not exist..."
SOWS.Sales_Order_VS_Service testcreateSO = new SOWS.Sales_Order_VS_Service();
testcreateSO.UseDefaultCredentials = true;
SOWS.Sales_Order_VS SOEntity = new SOWS.Sales_Order_VS();
testcreateSO.Create(ref SOEntity);
SOEntity.Sell_to_Customer_No = "44094";
SOEntity.Store_No = "S9003";
SOEntity.Location_Code = "S9003";
testcreateSO.Update(ref SOEntity);
SOEntity.SalesLines = new SOWS.Sales_Order_Line[1];
SOEntity.SalesLines[0] = new SOWS.Sales_Order_Line();
testcreateSO.Update(ref SOEntity);
SOEntity.SalesLines[0].Type = SOWS.Type.Item;
SOEntity.SalesLines[0].TypeSpecified = true;
SOEntity.SalesLines[0].No = "208122";
SOEntity.SalesLines[0].Quantity = 1;
testcreateSO.Update(ref SOEntity);
System.Web.Services.Protocols.SoapException: 'The Standard Text does not exist. Identification fields and values: Code='208122''
Checking in table Sales Lines, a record of new order has been created but Type = 0 (means blank)
Document No_ Line No_ Sell-to Customer No_ Type No_ Location Code Document Type
SO210600017 10000 0 1
Please help
Solution
Instead of using only singe page Sales Order as web service, can expose page Sales Order Line as another web service, so full code as below:
SOWS.Sales_Order_VS_Service testcreateSO = new SOWS.Sales_Order_VS_Service();
testcreateSO.UseDefaultCredentials = true;
SOWS.Sales_Order_VS SOEntity = new SOWS.Sales_Order_VS();
testcreateSO.Create(ref SOEntity);
SOEntity.Sell_to_Customer_No = "44094";
SOEntity.Store_No = "S9003";
SOEntity.Location_Code = "S9003";
testcreateSO.Update(ref SOEntity);
//Using Sales Order Line page as web service from here
SOLinesWS.salesDocumentLines_Service saleslinesSV = new SOLinesWS.salesDocumentLines_Service
{
UseDefaultCredentials = true
};
SOLinesWS.salesDocumentLines saleslines = new SOLinesWS.salesDocumentLines();
saleslines.documentType = SOLinesWS.documentType.Order;
saleslines.documentTypeSpecified = true;
saleslines.documentNumber = SOEntity.No;
saleslines.type = SOLinesWS.type.Item;
saleslines.typeSpecified = true;
saleslines.number = "208122";
saleslines.quantity = 1;
saleslines.quantitySpecified = true;
saleslinesSV.Create(ref saleslines);
I am populating a dataGridView from an incomplete excel spreadsheet and generating the LiteDB from the dataGridView. Before the recent update, I wasn't having any issues. Now I am getting the error 'Objects cannot be cast from DBNull to other types'. I can work around this by including dummy values in the original spreadsheet. But ultimately we need to see what information we're missing. How can I accomplish this?
public void CreateDatabase()
{
using (var db = new LiteDatabase(#"C:\Users\BThatcher\Documents\_Personal\Revit\MDL-Sheets\SheetDatabase04.db")) //< ----------------
{
var sheets = db.GetCollection<Sheet>("sheets");
foreach (DataGridViewRow row in dataGridView2.Rows)
{
var sheet = new Sheet
{
SheetSequence = Convert.ToInt32(row.Cells[0].Value),
SheetNumber = row.Cells[1].Value.ToString(),
SheetName = row.Cells[2].Value.ToString(),
AreaNumber = Convert.ToInt32(row.Cells[3].Value),
AreaName = row.Cells[4].Value.ToString(),
SheetDiscipline = row.Cells[5].Value.ToString(),
DisciplineSort = Convert.ToInt32(row.Cells[6].Value),
SheetSort = Convert.ToInt32(row.Cells[7].Value),
ModelName = row.Cells[8].Value.ToString(),
AppearsInSheetlist = row.Cells[9].Value.ToString(),
DesignedBy = row.Cells[10].Value.ToString(),
DrawnBy = row.Cells[11].Value.ToString(),
CheckedBy = row.Cells[12].Value.ToString(),
ApprovedBy = row.Cells[13].Value.ToString(),
SheetTotal = Convert.ToInt32(row.Cells[14].Value),
DesignSoftware = row.Cells[15].Value.ToString(),
HasPdf = row.Cells[16].Value.ToString(),
PdfPath = row.Cells[17].Value.ToString(),
};
sheets.Insert(sheet);
this.Close();
}
}
}
This error are not from LiteDB (there is no DBNull in LiteDB). It's possible this DBNull are getting from row.Cells[n].Value when you try to convert.
LiteDB support nulls and nullable values (like int?).
``code` DocuSignTK.Recipient recipient = new DocuSignTK.Recipient();
recipient.Email = signer_email; // This person will use embedded signing. If you have his
// email, supply it. If you don't, use a fake email that includes your
// ClientUserID. Eg embedded_signer_{ClientUserID}#your_company.com
recipient.UserName = signer_name;
recipient.ID = 1;
recipient.Type_x = 'Signer';
recipient.RoutingOrder = 1;
recipient.RoleName = 'Signer1';
// We want this signer to be "captive" so we can use embedded signing with him
recipient.CaptiveInfo = new DocuSignTK.RecipientCaptiveInfo();
recipient.CaptiveInfo.ClientUserID = signer_user_id; // Must uniquely identify the
// Create the recipient information
DocuSignTK.ArrayOfRecipient1 recipients = new DocuSignTK.ArrayOfRecipient1();
recipients.Recipient = new DocuSignTK.Recipient[1];
recipients.Recipient[0] = recipient;
DocuSignTK.ArrayOfTemplateReferenceRoleAssignment Roles = new DocuSignTK.ArrayOfTemplateReferenceRoleAssignment();
Roles.RoleAssignment = new DocuSignTK.TemplateReferenceRoleAssignment[1];
DocuSignTK.TemplateReferenceRoleAssignment role = new DocuSignTK.TemplateReferenceRoleAssignment();
role.RoleName = 'Signer1';
role.RecipientID = 1;
Roles.RoleAssignment[0] = role;
// Create the template reference from a server-side template ID
DocuSignTK.TemplateReference templateReference = new DocuSignTK.TemplateReference();
templateReference.Template = 'd0d80082-612b-4a04-b2a1-0672eb720491';
templateReference.TemplateLocation = 'Server';
templateReference.RoleAssignments = Roles;
// Construct the envelope information
DocuSignTK.EnvelopeInformation envelopeInfo = new DocuSignTK.EnvelopeInformation();
envelopeInfo.AccountId = account_Id;
envelopeInfo.Subject = 'Subject';
envelopeInfo.EmailBlurb = 'Email content';
// Make the call
try {
//DocuSignTK.EnvelopeStatus result = api_sender.CreateAndSendEnvelope(envelope);
// Create draft with all the template information
DocuSignTK.ArrayOfTemplateReference TemplateReferenceArray = new DocuSignTK.ArrayOfTemplateReference();
TemplateReferenceArray.TemplateReference = new DocuSignTK.TemplateReference[1];
TemplateReferenceArray.TemplateReference[0] = templateReference;
DocuSignTK.EnvelopeStatus result = api_sender.CreateEnvelopeFromTemplates( TemplateReferenceArray, recipients, envelopeInfo, true);
envelope_id = result.EnvelopeID;
System.debug('Returned successfully, envelope_id = ' + envelope_id );
} catch ( CalloutException e) {
System.debug('Exception - ' + e );
error_code = 'Problem: ' + e;
error_message = error_code;
} `code``
I am integrating Docusign for embedded signing. I am using SOAP API and used method CreateEnvelopeFromTemplates . Template I created is having some fields/Tabs. But once I open signing url these fields are located on side of the document instead of the location which I sent in template.
I have also assigned Role name for recipient but it is not working. Please help.
Click here to see screenshot
Here is the C# code to create an envelope from template using the DocuSign SOAP Api. Documentation here
string apiUrl = "https://demo.docusign.net/api/3.0/api.asmx";
string accountId = "Enter accountId"; //
string email = "Enter email";
string userName = "Enter intergrator key";
userName += email;
string _password = "Enter password";
var apiClient = new DocuSignTK.APIServiceSoapClient("APIServiceSoap", apiUrl);
apiClient.ClientCredentials.UserName.UserName = userName;
apiClient.ClientCredentials.UserName.Password = _password;
// Construct all the recipient information
var recipients = new DocuSignTK.Recipient[1];
recipients[0] = new DocuSignTK.Recipient();
recipients[0].Email = "recipientone#acme.com";
recipients[0].UserName = "recipient one";
recipients[0].Type = DocuSignTK.RecipientTypeCode.Signer;
recipients[0].ID = "1";
recipients[0].RoutingOrder = 1;
recipients[0].RoleName = "Signer1";
var roles = new DocuSignTK.TemplateReferenceRoleAssignment[1];
roles[0] = new DocuSignTK.TemplateReferenceRoleAssignment();
roles[0].RoleName = recipients[0].RoleName;
roles[0].RecipientID = recipients[0].ID;
// Use a server-side template -- you could make more than one of these
var templateReference = new DocuSignTK.TemplateReference();
templateReference.TemplateLocation = DocuSignTK.TemplateLocationCode.Server;
// TODO: replace with template ID from your account
templateReference.Template = "d0d80082-612b-4a04-b2a1-0672eb720491";
templateReference.RoleAssignments = roles;
// Construct the envelope information
DocuSignTK.EnvelopeInformation envelopeInfo = new DocuSignTK.EnvelopeInformation();
envelopeInfo.AccountId = " ";
envelopeInfo.Subject = "create envelope from templates test";
envelopeInfo.EmailBlurb = "testing docusign creation services";
// Create draft with all the template information
DocuSignTK.EnvelopeStatus status = apiClient.CreateEnvelopeFromTemplates(new DocuSignTK.TemplateReference[] { templateReference },
recipients, envelopeInfo, false);
I downloaded a template from production and uploaded in sandbox but once I recreated similar template in Sandbox only and used it's template ID in code then it is working perfectly. Apparently, There seems to be some issue with import template utility of Docusign.
How do I create a tax rate in QBO using API v3 and the TaxService resource? When I try to add it the same way as I would any other object, Visual Studio gives me this error: "The type 'Intuit.Ipp.Data.TaxService' cannot be used as type parameter 'T' in the generic type or method Intuit.Ipp.DataService.DataService.Add(T)'. There is no implicit reference conversion from 'Intuit.Ipp.Data.TaxService' to 'Intuit.Ipp.Data.IEntity'."
Here's the code:
Intuit.Ipp.Data.TaxService ts = new Intuit.Ipp.Data.TaxService();
// Populate fields here...
DataService ds = new DataService(ServiceContext);
Intuit.Ipp.Data.TaxService newTs = ds.Add<Intuit.Ipp.Data.TaxService>(ts);
Use GlobalTaxService endpoint and JSON format only. Try this code:
GlobalTaxService taxSvc = new GlobalTaxService(context);
Intuit.Ipp.Data.TaxService taxCodetobeAdded = new Data.TaxService();
taxCodetobeAdded.TaxCode = "taxC_" + Guid.NewGuid().ToString("N");
QueryService<TaxAgency> taxagency = new QueryService<TaxAgency>(context);
TaxAgency taxagencyResult = taxagency.ExecuteIdsQuery("select * from TaxAgency").FirstOrDefault<TaxAgency>();
List<TaxRateDetails> lstTaxRate = new List<TaxRateDetails>();
TaxRateDetails taxdetail1 = new TaxRateDetails();
taxdetail1.TaxRateName = "taxR1_" + Guid.NewGuid().ToString("N");
taxdetail1.RateValue = 3m;
taxdetail1.RateValueSpecified = true;
taxdetail1.TaxAgencyId = taxagencyResult.Id.ToString();
taxdetail1.TaxApplicableOn = TaxRateApplicableOnEnum.Sales;
taxdetail1.TaxApplicableOnSpecified = true;
lstTaxRate.Add(taxdetail1);
TaxRateDetails taxdetail2 = new TaxRateDetails();
taxdetail2.TaxRateName = "taxR2_" + Guid.NewGuid().ToString("N");
taxdetail2.RateValue = 2m;
taxdetail2.RateValueSpecified = true;
taxdetail2.TaxAgencyId = taxagencyResult.Id.ToString();
taxdetail2.TaxApplicableOn = TaxRateApplicableOnEnum.Sales;
taxdetail2.TaxApplicableOnSpecified = true;
lstTaxRate.Add(taxdetail2);
//TaxRateDetails taxdetail3 = new TaxRateDetails();
//taxdetail3.TaxRateName = "rate298";
//taxdetail3.TaxRateId = "2";
//lstTaxRate.Add(taxdetail3);
taxCodetobeAdded.TaxRateDetails = lstTaxRate.ToArray();
Intuit.Ipp.Data.TaxService taxCodeAdded = taxSvc.AddTaxCode(taxCodetobeAdded);
I can't seem to find any documentation or code samples on how to add a hyperlink to a cell in Excel 2007 using the Open XML SDK 2.0. I am using the following code, but is there a step I am missing?
WorksheetPart workSheetPart = ExcelUtilities.GetWorkSheetPart(mWorkBookPart, "Program");
workSheetPart.AddHyperlinkRelationship(new Uri("http://www.google.com", UriKind.Absolute), true);
workSheetPart.Worksheet.Save();
mWorkBookPart.Workbook.Save();
Then when I try and open the Excel document it says the file is corrupted because the Relationship Id for the hyperlink cannot be found. How do you setup or create that Relationship Id?
Another possibility, (which I used), is to use the HYPERLINK formula for Excel. I needed to create individual hyperlinks in each cell, yet the cells had to display different text, (I had to display tracking numbers in the cells yet have a hyperlink for each tracking number to the carrier's site and had to handle multiple carriers).
Once I instantiated an individual cell, the formula was applied in this manner to each cell (there are undoubtedly numerous way):
// ...
Cell cell1 = new Cell(){ CellReference = "A1", StyleIndex = (UInt32Value)1U, DataType = CellValues.InlineString };
CellValue cellValue1 = new CellValue();
CellFormula cellFormula1 = new CellFormula() { Space = SpaceProcessingModeValues.Preserve };
cellFormula1.Text = #"HYPERLINK(""http://www.theclash.com"", ""Radio Clash"")";
cellValue1.Text = "Radio Clash";
cell1.Append(cellFormula1);
cell1.Append(cellValue1);
// append cell, etc.
In this way, I was able to create individual hyperlinks and text for each cell. By the way, the links will appear with the default font color unless you reference a style with blue font.
Hope this helps.
I was able to add a hyperlink to a cell using System.IO.Packaging code:
private void HyperlinkCreate(PackagePart part, XmlNamespaceManager nsm, XmlNode _cellElement, string CellAddress)
{
Uri _hyperlink = new Uri("http://www.yahoo.com");
XmlNode linkParent = _cellElement.OwnerDocument.SelectSingleNode("//d:hyperlinks", nsm);
if (linkParent == null)
{
// create the hyperlinks node
linkParent = _cellElement.OwnerDocument.CreateElement("hyperlinks", #"http://schemas.openxmlformats.org/spreadsheetml/2006/main");
XmlNode prevNode = _cellElement.OwnerDocument.SelectSingleNode("//d:conditionalFormatting", nsm);
if (prevNode == null)
{
prevNode = _cellElement.OwnerDocument.SelectSingleNode("//d:mergeCells", nsm);
if (prevNode == null)
{
prevNode = _cellElement.OwnerDocument.SelectSingleNode("//d:sheetData", nsm);
}
}
_cellElement.OwnerDocument.DocumentElement.InsertAfter(linkParent, prevNode);
}
string searchString = string.Format("./d:hyperlink[#ref = '{0}']", CellAddress);
XmlElement linkNode = (XmlElement)linkParent.SelectSingleNode(searchString, nsm);
XmlAttribute attr;
if (linkNode == null)
{
linkNode = _cellElement.OwnerDocument.CreateElement("hyperlink", #"http://schemas.openxmlformats.org/spreadsheetml/2006/main");
// now add cell address attribute
linkNode.SetAttribute("ref", CellAddress);
linkParent.AppendChild(linkNode);
}
attr = (XmlAttribute)linkNode.Attributes.GetNamedItem("id", #"http://schemas.openxmlformats.org/officeDocument/2006/relationships");
if (attr == null)
{
attr = _cellElement.OwnerDocument.CreateAttribute("r", "id", #"http://schemas.openxmlformats.org/officeDocument/2006/relationships");
linkNode.Attributes.Append(attr);
}
PackageRelationship relationship = null;
string relID = attr.Value;
if (relID == "")
relationship = part.CreateRelationship(_hyperlink, TargetMode.External, #"http://schemas.openxmlformats.org/officeDocument/2006/relationships/hyperlink");
else
{
relationship = part.GetRelationship(relID);
if (relationship.TargetUri != _hyperlink)
relationship = part.CreateRelationship(_hyperlink, TargetMode.External, #"http://schemas.openxmlformats.org/officeDocument/2006/relationships/hyperlink");
}
attr.Value = relationship.Id;
}
I then translated this code using the Open XML SDK 2.0 and it doesn't work. It seems the AddHyperlinkRelationship method doesn't actually add the relationship to the .rels file. I'm not sure why, but it sure seems like a bug to me.
private void HyperlinkCreate(PackagePart part, XmlNamespaceManager nsm, XmlNode _cellElement, string CellAddress)
{
WorksheetPart workSheetPart = ExcelUtilities.GetWorkSheetPart(mWorkBookPart, "Program");
Uri hyperlinkUri = new Uri("http://www.yahoo.com", UriKind.Absolute);
Hyperlinks hyperlinks = workSheetPart.Worksheet.Descendants<Hyperlinks>().FirstOrDefault();
// Check to see if the <x:hyperlinks> element exists; if not figure out
// where to insert it depending on which elements are present in the Worksheet
if (hyperlinks == null)
{
// Create the hyperlinks node
hyperlinks = new Hyperlinks();
OpenXmlCompositeElement prevElement = workSheetPart.Worksheet.Descendants<ConditionalFormatting>().FirstOrDefault();
if (prevElement == null)
{
prevElement = workSheetPart.Worksheet.Descendants<MergeCells>().FirstOrDefault();
if (prevElement == null)
{
// No FirstOrDefault needed since a Worksheet requires SheetData or the excel doc will be corrupt
prevElement = workSheetPart.Worksheet.Descendants<SheetData>().First();
}
}
workSheetPart.Worksheet.InsertAfter(hyperlinks, prevElement);
}
Hyperlink hyperlink = hyperlinks.Descendants<Hyperlink>().Where(r => r.Reference.Equals(CellAddress)).FirstOrDefault();
if (hyperlink == null)
{
hyperlink = new Hyperlink() { Reference = CellAddress, Id = string.Empty };
}
HyperlinkRelationship hyperlinkRelationship = null;
string relId = hyperlink.Id;
if (relId.Equals(string.Empty))
{
hyperlinkRelationship = workSheetPart.AddHyperlinkRelationship(hyperlinkUri, true);
}
else
{
hyperlinkRelationship = workSheetPart.GetReferenceRelationship(relId) as HyperlinkRelationship;
if (!hyperlinkRelationship.Uri.Equals(hyperlinkUri))
{
hyperlinkRelationship = workSheetPart.AddHyperlinkRelationship(hyperlinkUri, true);
}
}
hyperlink.Id = hyperlinkRelationship.Id;
hyperlinks.AppendChild<Hyperlink>(hyperlink);
workSheetPart.Worksheet.Save();
}
You should be adding it to an object that accepts hyperlinks, such as a cell, instead of the worksheet. Something like this should work for you:
using DocumentFormat.OpenXml.Spreadsheet;
using DocumentFormat.OpenXml;
namespace GeneratedCode
{
public class GeneratedClass
{
// Creates an Worksheet instance and adds its children.
public Worksheet GenerateWorksheet()
{
Worksheet worksheet1 = new Worksheet(){ MCAttributes = new MarkupCompatibilityAttributes(){ Ignorable = "x14ac" } };
worksheet1.AddNamespaceDeclaration("r", "http://schemas.openxmlformats.org/officeDocument/2006/relationships");
worksheet1.AddNamespaceDeclaration("mc", "http://schemas.openxmlformats.org/markup-compatibility/2006");
worksheet1.AddNamespaceDeclaration("x14ac", "http://schemas.microsoft.com/office/spreadsheetml/2009/9/ac");
SheetDimension sheetDimension1 = new SheetDimension(){ Reference = "A1" };
SheetViews sheetViews1 = new SheetViews();
SheetView sheetView1 = new SheetView(){ TabSelected = true, WorkbookViewId = (UInt32Value)0U };
sheetViews1.Append(sheetView1);
SheetFormatProperties sheetFormatProperties1 = new SheetFormatProperties(){ DefaultRowHeight = 14.4D, DyDescent = 0.3D };
SheetData sheetData1 = new SheetData();
Row row1 = new Row(){ RowIndex = (UInt32Value)1U, Spans = new ListValue<StringValue>() { InnerText = "1:1" }, DyDescent = 0.3D };
Cell cell1 = new Cell(){ CellReference = "A1", StyleIndex = (UInt32Value)1U, DataType = CellValues.SharedString };
CellValue cellValue1 = new CellValue();
cellValue1.Text = "0";
cell1.Append(cellValue1);
row1.Append(cell1);
sheetData1.Append(row1);
Hyperlinks hyperlinks1 = new Hyperlinks();
Hyperlink hyperlink1 = new Hyperlink(){ Reference = "A1", Id = "rId1" };
hyperlinks1.Append(hyperlink1);
PageMargins pageMargins1 = new PageMargins(){ Left = 0.7D, Right = 0.7D, Top = 0.75D, Bottom = 0.75D, Header = 0.3D, Footer = 0.3D };
worksheet1.Append(sheetDimension1);
worksheet1.Append(sheetViews1);
worksheet1.Append(sheetFormatProperties1);
worksheet1.Append(sheetData1);
worksheet1.Append(hyperlinks1);
worksheet1.Append(pageMargins1);
return worksheet1;
}
}
}
Easiest way is to use the HyperLink formular, but the links aren't blue by default, this is why the styleIndex is set.
private Cell BuildHyperlinkCell(string url) =>
new Cell
{
DataType = new EnumValue<CellValues>(CellValues.String),
CellFormula = new CellFormula($"HyperLink(\"{url}\")"),
StyleIndex = 4u
};
Adding the styling to the workbook:
http://www.dispatchertimer.com/tutorial/how-to-create-an-excel-file-in-net-using-openxml-part-3-add-stylesheet-to-the-spreadsheet/