I have a problem that I can't seem to find any solution to online. All searches are for http to https or non-www to www but without the http in front.
My site will not redirect https://domain.com to https://www.domain.com. It redirects domain.com to www.domain.com just fine though, it's only when the https is already entered does it not redirect and thus gives an error.
I have this for redirecting http to https:
<rule name="HTTP to HTTPS redirect" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="off" ignoreCase="true" />
</conditions>
<action type="Redirect" redirectType="Found" url="https://{HTTP_HOST}/{R:1}" />
</rule>
Edit: after experimenting, it manages to redirect http://domain.com to https://www.domain.com correctly (i.e from without s to with s and www).
Yet still doesn't from https://domain.com to https://www.domain.com
Figured it out, after adding this:
<rule name="Force WWW and SSL" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAny">
<add input="{HTTP_HOST}" pattern="^[^www]" />
<add input="{HTTPS}" pattern="off" />
</conditions>
<action type="Redirect" url="https://www.domain.com/{R:1}" appendQueryString="true" redirectType="Permanent" />
</rule>
And most importantly, removing the hostname field 'www.domain.com in IIS > Site Bindings > Edit > Host Name, and unticking 'Require Server Name Indication'. Having my domain entered here was causing the above code to not work. I originally added this thinking it was necessary, but not so.
Related
Looking to redirect old subdomain back to the primary domain name (remove the subdomain if it's seen) in the web.config file for IIS.
For example,
preview.mysite.com redirects to mysite.com
The rule I've tried is this:
<rule name="Redirect away from Preview" enabled="true" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTP_HOST}{REQUEST_URI}" pattern="preview.mysite.com" ignoreCase="true" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}{REQUEST_URI}" redirectType="Permanent" appendQueryString="false" />
</rule>
It stops preview subdomain from loading, but shows error message instead of doing a redirect
This page isn’t working
preview.mysite.com redirected you too many times.
What can I do to correct the redirect rule to reroute any preview subdomain back to the base domain?
Got it fixed. Had to hardcode the redirect url and that fixed the looping issue, now redirects to the main domain:
<rule name="Redirect away from Preview" enabled="true" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTP_HOST}{REQUEST_URI}" pattern="preview.mysite.com" ignoreCase="true" />
</conditions>
<action type="Redirect" url="https://example.com" redirectType="Permanent" appendQueryString="false" />
</rule>
Hope this helps someone else. (Note: stackoverflow would not allow me to put mysite for the url so it shows example.com instead)
Ok have a strange redirect issue here. I have 3 domain names so lets call them the following
maindomain.com
aliasdomain.net
aliasdomain.org
We are using Let's Encrypt for https via IIS on a windows 2016 Server.
What we want is for anytime a person types in any of the 3 domains with or the www to all redirect to the domain name www.maindomain.com
Since the let's encrypt certificate is not creating www. versions for the domain aliases it is causing us some struggles. This is the web.config rules we are using but they do not work.
<rule name="Redirect to WWW" enabled="true">
<match url="(.*)" />
<conditions>
<add input="{HTTP_HOST}" pattern="^www\." negate="true" />
</conditions>
<action type="Redirect" url="https://www.{HTTP_HOST}{HTTP_URL}" redirectType="Permanent" appendQueryString="false" />
</rule>
<rule name="Redirect to HTTPS" enabled="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="OFF" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}{HTTP_URL}" redirectType="Permanent" appendQueryString="false" />
</rule>
So the results of this are the following
This works
www.maindomain.com works and redirects to https://www.maindomain.com
maindomain.com works and redirects to https://www.maindomain.com
This doesn't work and oddly enough shows the standard IIS landing page
aliasdomain.net doesn't work redirects to http://www.aliasdomain.net
www.aliasdomain.net doesn't work and redirects to http://www.aliasdomain.net
This one doesn't work at all
aliasdomain.org doesn't work redirects to https://www.aliasdomain.org
www.aliasdomain.org doesn't work and redirects to https://www.aliasdomain.org
No idea how to get this to do what we want. You would think it would not be some difficult to redirect any version of any domain name to the https://www.maindomain.com
Thanks for any help here.
The problem with your rule is that you are using {HTTP_HOST} in your
redirect action.This parameter will take the incoming hostname from
the request.I think that is not what you want. <action
type="Redirect" url="https://{HTTP_HOST}{HTTP_URL}"
redirectType="Permanent" appendQueryString="false" />
Please try below rule. It redirects if the hostname does not match
www.maindomain.com ,also enforce https
<rule name="CanonicalHostNameRule1" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAny">
<add input="{HTTP_HOST}" pattern="^www\.maindomain\.com$" negate="true" />
<add input="{HTTPS}" pattern="off" />
</conditions>
<action type="Redirect" url="https://www.maindomain.com/{R:1}" />
</rule>
Plain asp website. Need to redirect non-www to www AND http to https.
Found another post that was close but doesn't completely work. It works for root entries only but if there is anything beyond the root site name then the redirect does not work at all.
For example --
non-www will redirect properly to https and www
non-http will also redirect properly to https and www
But domain.com/categories.asp?cat=130 will not redirect and will simply stay on the non-https, non-www page.
Any fix for this redirect?
Here is the code that I used:
<rewrite>
<rules>
<rule name="Redirect to www" stopProcessing="true">
<match url="(.*)" />
<conditions trackAllCaptures="false">
<add input="{HTTP_HOST}" pattern="^domain.com$" />
</conditions>
<action type="Redirect" url="{MapProtocol:{HTTPS}}://www.domain.com/{R:1}" />
</rule>
</rules>
<rewriteMaps>
<rewriteMap name="MapProtocol">
<add key="on" value="https" />
<add key="off" value="http" />
</rewriteMap>
</rewriteMaps>
</rewrite>
OK -- I added this after my http to https and this works:
--
<rule name="Canonical name" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTP_HOST}" negate="true" pattern="^www\.domain\.com$" />
</conditions>
<action type="Redirect" url="https://www.domain.com/{R:1}" redirectType="Permanent" />
</rule>
I've read a number of posts here on SO as well as on the 'net (IIS blogs, etc.). I'm trying to force all connections going from domain.com to www.domain.com and at the same time forcing the request from HTTP to HTTPS.
I'm using this set of rules and rewrites but the only thing happening is that it's redirecting fine but not redirecting to SSL.
<!-- Redirect to HTTPS -->
<rewrite>
<rules>
<rule name="Redirect to www" stopProcessing="true">
<match url="(.*)" />
<conditions trackAllCaptures="false">
<add input="{HTTP_HOST}" matchType="Pattern" pattern="^mydomain.com$" ignoreCase="true" negate="false" />
</conditions>
<action type="Redirect" url="{MapProtocol:{HTTPS}}://www.mydomain.com/{R:1}" />
</rule>
</rules>
<rewriteMaps>
<rewriteMap name="MapProtocol" defaultValue="http">
<add key="on" value="https" />
<add key="off" value="http" />
</rewriteMap>
</rewriteMaps>
</rewrite>
What am I doing wrong?
Main blog reference: http://weblogs.asp.net/owscott/url-rewrite-protocol-http-https-in-the-action and this SO post - web.config redirect non-www to www
We faced same issue while redirecting from http to https using URL Rewrite module, But after switching off the require ssl module within IIS did the trick.
Go to SSL Settings of website
Uncheck require SSL checkbox.
Apply settings and Restart iis
Edit: So I found this blog post: http://www.meltedbutter.net/wp/?p=231 and gave it a try and voila! Worked like a charm. Not sure why this worked over the rules posted above but in my case the below is working and successfully taking all non-www traffic and redirecting it to both www and https.
<!-- Redirect to HTTPS -->
<rewrite>
<rules>
<rule name="http to https" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="^OFF$" />
</conditions>
<action type="Redirect" url="https://www.domain.com/{R:1}" redirectType="SeeOther" />
</rule>
</rules>
</rewrite>
This is a long shot for some cases but I had deleted my port 80 bindings for the website as I only wanted SSL / port 443. So from what I can tell is Port 80 binding is also needed for the the rewrite to work correctly.
In my case, I did everything #Valien said and lots of other tries but it did not work. finally I found the problem. It was because I was using 2 rules. First rule was rewriting to NodeJs server and the second to redirect http to https. I changed the order and now it is working correctly.
The config with the correct order in case more than 1 rule is applied:
<rewrite>
<rules>
<rule name="http to https" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="^OFF$" />
</conditions>
<action type="Redirect" url="https://mywebsite.com/{R:1}" redirectType="SeeOther" />
</rule>
<rule name="ReverseProxyToLocalhost:3000" stopProcessing="true">
<match url="(.*)" />
<action type="Rewrite" url="http://localhost:3000/{R:1}" />
</rule>
</rules>
</rewrite>
My goal is to have rule(s) in IIS/Azure's web.config file to successfully redirect the following client request examples:
HTTPS redirect:
From: example.com
To: https://example.com
No-www & HTTPS redirect:
From: www.example.com
To: https://example.com
No-www, HTTPS redirect & maintain path:
From: www.example.com/examplepage
To: https://example.com/examplepage
Here's what I have so far, which only is achieving point 1 and 2. If a visitor lands directly on a subpage, they aren't redirected to non-www and aren't redirected to HTTPS.
<rule name="Redirect to https">
<match url="(.*)"/>
<conditions>
<add input="{HTTPS}" pattern="Off"/>
<add input="{REQUEST_METHOD}" pattern="^get$|^head$" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}/{R:1}"/>
</rule>
<rule name="Canonical Hostname" stopProcessing="false">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{HTTP_HOST}" pattern="^(www\.)(.*)$" />
</conditions>
<action type="Redirect" url="https://{C:2}{REQUEST_URI}" redirectType="Permanent" />
</rule>
I've exhausted multiple search result pages and multiple StackOverflow questions without any luck - they all promise to be able to achieve the third point (redirect to a non-www, HTTPS page and maintain the path) but they haven't worked for me.
Thanks for taking the time to read this!
I discovered the problem, which is partly due to the way I presented my question (sorry, StackOverflowers!).
The issue was the ordering of the rules. I've put the following (new) rules at the top of my rules section, in the following order, for those who suffer this problem in the future. Now, it is redirecting to HTTPS, with no-www, and maintaining the path that was requested by the client.
<rule name="Canonical Hostname" stopProcessing="false">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{HTTP_HOST}" pattern="^(www\.)(.*)$" />
</conditions>
<action type="Redirect" url="http://{C:2}{REQUEST_URI}" redirectType="Permanent" />
</rule>
<rule name="Force HTTPS" enabled="true">
<match url="(.*)" ignoreCase="false" />
<conditions>
<add input="{HTTPS}" pattern="off" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}/{R:1}" appendQueryString="true" redirectType="Permanent" />
</rule>