I need to call a socket request from the bootstrap.js file in sails.
The bootstrap.js file has some code checking if some game engine has updated some file. If so, it needs send a message with some updated data via socket to some defined route called "/update"... e.g.
io.socket.put('/update', {history:{sessions:[1,2,3,4]}},function gotResponse(body, response) {
console.log('Server sending request ot server ');
})
The problem is that it tells me that io is not recognised.
I tried to do npm install for both sails.io.js and socket.io-client and then write:
var io = require('sails.io.js')( require('socket.io-client') );
at the top.
Unfortunately, it gives me the following error message:
C:\Users\Evolver\Documents\programming\pipegame\game6\node_modules\socket.io-client\lib\url.js:29
if (null == uri) uri = loc.protocol + '//' + loc.host;
^
TypeError: Cannot read property 'protocol' of undefined
at url (C:\Users\Evolver\Documents\programming\pipegame\game6\node_modules\socket.io-client\lib\url.js:29:29)
at lookup (C:\Users\Evolver\Documents\programming\pipegame\game6\node_modules\socket.io-client\lib\index.js:44:16)
at goAheadAndActuallyConnect (C:\Users\Evolver\Documents\programming\pipegame\game6\node_modules\sails.io.js\sails.io.js:835:21)
at selfInvoking (C:\Users\Evolver\Documents\programming\pipegame\game6\node_modules\sails.io.js\sails.io.js:812:18)
at SailsSocket.SailsIOClient.SailsSocket._connect (C:\Users\Evolver\Documents\programming\pipegame\game6\node_modules\sails.io.js\sails.io.js:831:9)
at null._onTimeout (C:\Users\Evolver\Documents\programming\pipegame\game6\node_modules\sails.io.js\sails.io.js:1463:17)
at Timer.listOnTimeout (timers.js:92:15)
Any idea ?
Ok.
It now works, once npm install has been done for socket.io-client and sails.io.js if I do exactly the following:
var socketIOClient = require('socket.io-client');
var sailsIOClient = require('sails.io.js');
// Instantiate the socket client (`io`)
var io = sailsIOClient(socketIOClient);
io.sails.url = 'http://localhost:1337';
// then I send something via my socket
io.socket.put('/update', {history:{sessions:[1,2,3,4]}},function gotResponse(body, response) {
console.log('Server sending request ot server ');
})
Related
I have a basic server with socket.io, but every time I do a change on the server, it throws the error:
Error: listen EADDRINUSE: address already in use :::3000
But, even if I change the port, it will throw the error anyways. I used sudo kill -9 and that allowed me to run the server with no problems the first time, but if I make a change, or if I reset it, it will throw the error again.
SERVER CODE
var express = require('express');
var app = express();
var http = require('http').createServer(app);
var io = require('socket.io')(http);
app.get("/", function(request, result) {
result.send("== SERVIDOR ==");
});
var port = 3000
http.listen(port, function() {
console.log("-- Servidor iniciado")
console.log("-- Escuchando puerto "+ port +"...")
})
I have this pattern:
channel ESANTE_MPI_CREATE_PATIENT_LISTENER (with a MLLP listener) calls channel ESANTE_MPI_CREATE_PATIENT that calls a TCP destination.
If connection cannot be done in the TCP destination inside ESANTE_MPI_CREATE_PATIENT then this channel reports an error for this destination:(ERROR: ConnectException: Connection refused (Connection refused))
The response transformer does not seem to be called (which is normal as there is no response).
I wonder how I can report the error back to the calling channel ESANTE_MPI_CREATE_PATIENT_LISTENER ?
PS: When tcp destination responds, then I use the response transformer to parse the received frame and create a response message (json error/ok) for the calling channel. Everything works fine here.
My question ends up with: How to trap a Connection refused in a TCP destination to create a response message.
I finally managed this by using the postprocessor script in ESANTE_MPI_CREATE_PATIENT to get the response of the connector and then force a message.
// fake error message prepared for connection refused.
// we put this as the response of the channel destination in order to force a understandable error message.
const sErrorMsg = {
status: "error",
error: "connection refused to eSanté MPI"
};
const TCP_CONNECTOR_ESANTE_MPI_RANK = 2; // WARNING: be sure to take the correct connector ID as displayed into destination.
const TCP_CONNECTOR_ESANTE_MPI_DNAME = 'd' + TCP_CONNECTOR_ESANTE_MPI_RANK; // WARNING: be sure to take the correct connector ID as displayed into destination.
/*
var cms = message.getConnectorMessages(); // returns message but as Immutable
responses. not what we want: we use responseMap instead.
var key = TCP_CONNECTOR_ESANTE_MPI_RANK;
logger.debug(" Response Data=" + cms.get(key).getResponseData());
logger.debug(" Response Data0=" + cms.get(key).getResponseError());
logger.debug(" Response Data1=" + cms.get(key).getResponseData().getError());
logger.debug(" Response Data2=" + cms.get(key).getResponseData().getMessage());
logger.debug(" Response Data3=" + cms.get(key).getResponseData().getStatusMessage());
logger.debug(" Response Data4=" + cms.get(key).getResponseData().getStatus());
*/
var responseMPI = responseMap.get(TCP_CONNECTOR_ESANTE_MPI_DNAME); // return a mutable reponse :-)
if (responseMPI.getStatus()=='ERROR' &&
responseMPI.getStatusMessage().startsWith('ConnectException: Connection refused')) {
// build a error message for this dedicated case
logger.error("connection refused detected");
responseMPI.setMessage(JSON.stringify(sErrorMsg)); // force the message to be responsed.
}
return;
I'm new to ZAP and I don't know much about it's js/ecma scripting.
Basically, I was trying to redirect request to another host.
Say an application that is connected to the ZAP proxy makes a request in a URL:
http://www.somesite.com/path/to/a/file
but I want to change the hostname in the URL to:
another.site.com
so it will actually request to: http://www.anothersite.com/path/to/a/file
Here's the code that I was trying to work but the URL remains unchanged in the request.
function proxyRequest(msg) {
// Debugging can be done using println like this
var uri = msg.getRequestHeader().getURI().toString()
var host = msg.getRequestHeader().getURI().getHost().toString()
print('proxyResponse called for url=' + uri)
if (host == 'download.qt.io') {
uri = uri.replace('download.qt.io/online/', 'mirrors.ocf.berkeley.edu/qt/online/')
msg.getRequestHeader().setHeader('Location', uri)
print('proxyRequest changed to url=' + uri)
}
if (host == 'ftp.jaist.ac.jp') {
uri = uri.replace('ftp.jaist.ac.jp/pub/qtproject/online/', 'mirrors.ocf.berkeley.edu/qt/online/')
msg.getRequestHeader().setHeader('Location', uri)
print('proxyRequest changed to url=' + uri)
}
if (host == 'qtproject.mirror.liquidtelecom.com') {
uri = uri.replace('qtproject.mirror.liquidtelecom.com/online/', 'mirrors.ocf.berkeley.edu/qt/online/')
msg.getRequestHeader().setHeader('Location', uri)
print('proxyRequest changed to url=' + uri)
}
return true
}
Option 1: Replacer Rule
Install the Replacer addon, from the marketplace:
Goto the Tools menu and select 'Replacer Options'.
Setup a rule as shown in the following screenshot.
Save/Okay as appropriate.
Now when your browse etc all your traffic will be redirected/rewritten.
Option 2: HttpSender Script
Create a new HttpSender script, similar to the following example:
function sendingRequest(msg, initiator, helper) {
var host = msg.getRequestHeader().getURI().getHost();
if (host.equals("www.somesite.com")) {
uri = msg.getRequestHeader().getURI();
uri.setEscapedAuthority("www.anothersite.com");
msg.getRequestHeader().setURI(uri);
}
return msg;
}
function responseReceived(msg, initiator, helper) {}
Option 3: Hosts File Entry
Goto a command prompt and nslookup www.somesite.com, note the IP address (w.x.y.z).
In your hosts file, add an entry associating the noted IP (w.x.y.z) with www.anothersite.com.
(You may need to restart ZAP/browsers for this change to take effect. On linux you'll likely need to sudo to edit the file, on Windows you'll need to edit it as an admin user.)
(Further details WRT editing your hosts file: https://www.howtogeek.com/howto/27350/beginner-geek-how-to-edit-your-hosts-file/)
I have a RESTful server created with ASP.Net and am trying to connect to it with the use of a RESTful client from Unity. GET works perfectly, however I am getting a validation error when sending a POST request. At the same time both GET and POST work when sending requests from Postman.
My Server:
[HttpPost]
public IActionResult Create(User user){
Console.WriteLine("***POST***");
Console.WriteLine(user.Id+", "+user.sex+", "+user.age);
if(!ModelState.IsValid)
return BadRequest(ModelState);
_context.Users.Add(user);
_context.SaveChanges();
return CreatedAtRoute("GetUser", new { id = user.Id }, user);
}
My client:
IEnumerator PostRequest(string uri, User user){
string u = JsonUtility.ToJson(user);
Debug.Log(u);
using (UnityWebRequest webRequest = UnityWebRequest.Post(uri, u)){
webRequest.SetRequestHeader("Content-Type","application/json");
yield return webRequest.SendWebRequest();
string[] pages = uri.Split('/');
int page = pages.Length - 1;
if (webRequest.isNetworkError || webRequest.isHttpError){
Debug.Log(pages[page] + ":\nReceived: " + webRequest.downloadHandler.text);
}
else{
Debug.Log(pages[page] + ":\nReceived: " + webRequest.downloadHandler.text);
}
}
}
I was trying both with the Json conversion and writing the string on my own, also with the WWWForm, but the error stays.
The error says that it's an unknown HTTP error. When printing the returned text it says:
"One or more validation errors occurred.","status":400,"traceId":"|b95d39b7-4b773429a8f72b3c.","errors":{"$":["'%' is an invalid start of a value. Path: $ | LineNumber: 0 | BytePositionInLine: 0."]}}
On the server side it recognizes the correct method and controller, however, it doesn't even get to the first line of the method (Console.WriteLine). Then it says: "Executing ObjectResult, writing value of type 'Microsoft.AspNetCore.Mvc.ValidationProblemDetails'".
Here're all of the server side messages:
info: Microsoft.AspNetCore.Hosting.Diagnostics[1]
Request starting HTTP/1.1 POST http://localhost:5001/user application/json 53
info: Microsoft.AspNetCore.Routing.EndpointMiddleware[0]
Executing endpoint 'TheNewestDbConnect.Controllers.UserController.Create (TheNewestDbConnect)'
info: Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker[3]
Route matched with {action = "Create", controller = "User"}. Executing controller action with signature Microsoft.AspNetCore.Mvc.IActionResult Create(TheNewestDbConnect.Data.Entities.User) on controller TheNewestDbConnect.Controllers.UserController (TheNewestDbConnect).
info: Microsoft.AspNetCore.Mvc.Infrastructure.ObjectResultExecutor[1]
Executing ObjectResult, writing value of type 'Microsoft.AspNetCore.Mvc.ValidationProblemDetails'.
info: Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker[2]
Executed action TheNewestDbConnect.Controllers.UserController.Create (TheNewestDbConnect) in 6.680400000000001ms
info: Microsoft.AspNetCore.Routing.EndpointMiddleware[1]
Executed endpoint 'TheNewestDbConnect.Controllers.UserController.Create (TheNewestDbConnect)'
info: Microsoft.AspNetCore.Hosting.Diagnostics[2]
Request finished in 11.3971ms 400 application/problem+json; charset=utf-8
info: Microsoft.AspNetCore.Hosting.Diagnostics[1]
I have no idea what is happening and how to solve it. Any help will be strongly appreciated!
Turned out I was just missing an upload handler. Adding this line solved it: webRequest.uploadHandler = new UploadHandlerRaw(System.Text.Encoding.UTF8.GetBytes(JsonObject));
I am trying to pre-bind an XMPP session via XMPHP and pass the rid/sid/jid to a strophe client to attach to the session.
connection code here:
$conn = new CIRCUIT_BOSH('server.com', 7070, $username, $pass, $resource, 'server.com', $printlog=true, $loglevel=XMPPHP_Log::LEVEL_VERBOSE);
$conn->autoSubscribe();
try{
$conn->connect('http://xmpp.server.com/http-bind', 1, true);
$log->lwrite('Connected!');
}catch(XMPPHP_Exception $e){
die($e->getMessage());
}
I am getting the rid and sid but the fulljid in the $conn object stays empty and I cant see a session started on my openfire admin console.
If I create the jid manually by using the given resource and passing jid/rid/sid to strophe to use in attach, I get the ATTACHED status and I see calls from the client to the BOSH ip but I still dont see a session and I cant use the connection.
Strophe Client Code:
Called on document ready:
var sid = $.cookie('sid');
var rid = $.cookie('rid');
var jid = $.cookie('jid');
$(document).trigger('attach', {
sid: sid,
rid: rid,
jid: jid,
});
$(document).bind('attach', function (ev, data) {
var conn = new Strophe.Connection(
"http://xmpp.server.com/http-bind");
conn.attach(data.jid, data.sid, data.rid, function (status) {
if (status === Strophe.Status.CONNECTED) {
$(document).trigger('connected');
} else if (status === Strophe.Status.DISCONNECTED) {
$(document).trigger('disconnected');
} else if (status === Strophe.Status.ATTACHED){
$(document).trigger('attached');
}
});
Object.connection = conn;
});
I think the problem starts on the XMPPHP side which is not creating the session properly.
'attached' is triggered but never 'connected', is status 'connected' supposed to be sent?
What am I missing?
Ok, solved, I saw that XMPPHP lib didn't create a session at all on the openfire server, so I wrote a simple test for the XMPP class which was good and created the session, and for the XMPP_BOSH class that didn't manage create one. Then I saw the issue report here: http://code.google.com/p/xmpphp/issues/detail?id=47 comment no.9 worked, it fixed the issue by copying the processUntil() function from the XMLStream.php to BOSH.php, still can't figure out why this is working. Then I found I had an overlapping bug also with some of the passwords set for users on the openfire server. These passwords contained these ! # % ^ characters, for some reason the XMPP_BOSH is sending the password corrupted or changed so I got Auth Failed exception. Changing the password fixed the issue and I can now attach to the session XMPPHP created with the Strophe.js library.