I've made digit recognition (56x56 digits) using Neural Networks, but I'm getting 89.5% accuracy on test set and 100% on training set. I know that it's possible to get >95% on test set using this training set. Is there any way to improve my training so I can get better predictions? Changing iterations from 300 to 1000 gave me +0.12% accuracy. I'm also file size limited so increasing number of nodes can be impossible, but if that's the case maybe I could cut some pixels/nodes from the input layer.
To train I'm using:
input layer: 3136 nodes
hidden layer: 220 nodes
labels: 36
regularized cost function with lambda=0.1
fmincg to calculate weights (1000 iterations)
As mentioned in the comments, the easiest and most promising way is to switch to a Convolutional Neural Network. But with you current model you can:
Add more layers with less neurons each, which increases learning capacity and should increase accuracy by a bit. Problem is that you might start overfitting. Use regularization to counter this.
Use batch Normalization (BN). While you are already using regularization, BN accelerates training and also does regularization, and is a NN specific algorithm that might work better.
Make an ensemble. Train several NNs on the same dataset, but with a different initialization. This will produce slightly different classifiers and you can combine their output to get a small increase in accuracy.
Cross-entropy loss. You don't mention what loss function you are using, if its not Cross-entropy, then you should start using it. All the high accuracy classifiers use cross-entropy loss.
Switch to backpropagation and Stochastic Gradient Descent. I do not know the effect of using a different optimization algorithm, but backpropagation might outperform the optimization algorithm you are currently using, and you could combine this with other optimizers such as Adagrad or ADAM.
Other small changes that might increase accuracy are changing the activation functions (like ReLU), shuffle training samples after every epoch, and do data augmentation.
Related
I'm learing how LSTM works by practicing with time series training data(input is a list of features and output is a scalar).
There is a problem that i couldnt understand when calculating loss for RNN/LSTM:
How loss is calculated? Is it calculated at each time i give the nn new input or acummulated through all the given inputs and then be backprop
#seed Answer is correct. However, in LSTM, or any RNN architecture, the loss for each instance, across all time steps, is added up. In other words, you'll have (L0#t0, L1#t1, ... LT#tT) for each sample in your input batch. Add those losses separately for each instance in the batch. Finally average the losses of each input instance to get the average loss for a current batch
For more information please visit: https://stanford.edu/~shervine/teaching/cs-230/cheatsheet-recurrent-neural-networks
The answer does not depend on the neural network model.
It depends on your choice of optimization method.
If you are using batch gradient descent, the loss is averaged over the whole training set. This is often impractical for neural networks, because the training set is too big to fit into RAM, and each optimization step takes a lot of time.
In stochastic gradient descent, the loss is calculated for each new input. The problem with this method is that it is noisy.
In mini-batch gradient descent, the loss is averaged over each new minibatch - a subsample of inputs of some small fixed size. Some variation of this method is typically used in practice.
So, the answer to your question depends on the minibatch size you choose.
(Image is from here)
In the context of a binary classification, I use a neural network with 1 hidden layer using a tanh activation function. The input is coming from a word2vect model and is normalized.
The classifier accuracy is between 49%-54%.
I used a confusion matrix to have a better understanding on what’s going on. I study the impact of feature number in input layer and the number of neurons in the hidden layer on the accuracy.
What I can observe from the confusion matrix is the fact that the model predict based on the parameters sometimes most of the lines as positives and sometimes most of the times as negatives.
Any suggestion why this issue happens? And which other points (other than input size and hidden layer size) might impact the accuracy of the classification?
Thanks
It's a bit hard to guess given the information you provide.
Are the labels balanced (50% positives, 50% negatives)? So this would mean your network is not training at all as your performance corresponds to the random performance, roughly. Is there maybe a bug in the preprocessing? Or is the task too difficult? What is the training set size?
I don't believe that the number of neurons is the issue, as long as it's reasonable, i.e. hundreds or a few thousand.
Alternatively, you can try another loss function, namely cross entropy, which is standard for multi-class classification and can also be used for binary classification:
https://www.tensorflow.org/api_docs/python/nn/classification#softmax_cross_entropy_with_logits
Hope this helps.
The data set is well balanced, 50% positive and negative.
The training set shape is (411426,X)
The training set shape is (68572,X)
X is the number of the feature coming from word2vec and I try with the values between [100,300]
I have 1 hidden layer, and the number of neurons that I test varied between [100,300]
I also test with mush smaller features/neurons size: 2-20 features and 10 neurons on the hidden layer.
I use also the cross entropy as cost fonction.
I am looking at (two-layer) feed-forward Neural Networks in Matlab. I am investigating parameters that can minimise the classification error.
A google search reveals that these are some of them:
Number of neurons in the hidden layer
Learning Rate
Momentum
Training type
Epoch
Minimum Error
Any other suggestions?
I've varied the number of hidden neurons in Matlab, varying it from 1 to 10. I found that the classification error is close to 0% with 1 hidden neuron and then grows very slightly as the number of neurons increases. My question is: shouldn't a larger number of hidden neurons guarantee an equal or better answer, i.e. why might the classification error go up with more hidden neurons?
Also, how might I vary the Learning Rate, Momentum, Training type, Epoch and Minimum Error in Matlab?
Many thanks
Since you are considering a simple two layer feed forward network and have already pointed out 6 different things you need to consider to reduce classification errors, I just want to add one thing only and that is amount of training data. If you train a neural network with more data, it will work better. Note that, training with large amount of data is a key to get good outcome from neural networks, specially from deep neural networks.
Why the classification error goes up with more hidden neurons?
Answer is simple. Your model has over-fitted the training data and thus resulting in poor performance. Note that, if you increase the number of neurons in hidden layers, it would decrease training errors but increase testing errors.
In the following figure, see what happens with increased hidden layer size!
How may I vary the Learning Rate, Momentum, Training type, Epoch and Minimum Error in Matlab?
I am expecting you have already seen feed forward neural net in Matlab. You just need to manipulate the second parameter of the function feedforwardnet(hiddenSizes,trainFcn) which is trainFcn - a training function.
For example, if you want to use gradient descent with momentum and adaptive learning rate backpropagation, then use traingdx as the training function. You can also use traingda if you want to use gradient descent with adaptive learning rate backpropagation.
You can change all the required parameters of the function as you want. For example, if you want to use traingda, then you just need to follow the following two steps.
Set net.trainFcn to traingda. This sets net.trainParam to traingda's default parameters.
Set net.trainParam properties to desired values.
Example
net = feedforwardnet(3,'traingda');
net.trainParam.lr = 0.05; % setting the learning rate to 5%
net.trainParam.epochs = 2000 % setting number of epochs
Please see this - gradient descent with adaptive learning rate backpropagation and gradient descent with momentum and adaptive learning rate backpropagation.
I have a neural network which does image segmentation. I trained it ~100 epochs. The current effect is that the validation loss is constant (0.2 +/- 0.03) and the training accuracy is still decreasing (currently 0.07), but very slow.
The result of the neural network is quite well.
What does this mean? Is it overfitting? Should i stop the training?
I currently use dropout in the first layer (50%). Would it make sense to add dropout to every layer (there are about ~15 layers)? Or should i also add L2 regularization? Does it make sense to use L2 and also droput?
Thank you very much
It is recommended to use L2 when you use dropout. I think that your dropout at 50% is a little too high. People usually use it around 20% depending on the operations.
Moreover, 100 epochs may not be enough, it depends on the size of your training set and the size of your neural network.
What do you mean by "quite well"? Please quantify it and share an example. The validation and accuracy are just "indicators", their value also depend on the NN and the training set, so 0.2 can be either bad or good depending on your problem.
I'm implementing a neural network for a supervised classification task in MATLAB.
I have a training set and a test set to evaluate the results.
The problem is that every time I train the network for the same training set I get very different results (sometimes I get a 95% classification accuracy and sometimes like 60%) for the same test set.
Now I know this is because I get different initial weights and I know that I can use 'seed' to set the same initial weights but the question is what does this say about my data and what is the right way to look at this? How do I define the accuracy I'm getting using my designed ANN? Is there a protocol for this (like running the ANN 50 times and get an average accuracy or something)?
Thanks
Make sure your test set is large enough compared to the training set (e.g. 10% of the overall data) and check it regarding diversity. If your test set only covers very specific cases, this could be a reason. Also make sure you always use the same test set. Alternatively you should google the term cross-validation.
Furthermore, observing good training set accuracy while observing bad test set accuracy is a sign for overfitting. Try to apply regularization like a simple L2 weight decay (simply multiply your weight matrices with e.g. 0.999 after each weight update). Depending on your data, Dropout or L1 regularization could also help (especially if you have a lot of redundancies in your input data). Also try to choose a smaller network topology (fewer layers and/or fewer neurons per layer).
To speed up training, you could also try alternative learning algorithms like RPROP+, RPROP- or RMSProp instead of plain backpropagation.
Looks like your ANN is not converging to the optimal set of weights. Without further details of the ANN model, I cannot pinpoint the problem, but I would try increasing the number of iterations.