Tick labels for ticks bigger than about 10'000, get formatted to 1x10^4 for example. Whereas the exponential part appears above the corresponding axes. This misbehavior has been well described on on matlab central as well, but without a solution.
Thanks for your help.
The 'quick trick'
set(gca, 'YTickLabel',get(gca,'YTick'))
did not work when applied to bar3, as can be seen on the following figure.
EDIT
According to this technical solution page, the recommended way of formatting the tick labels is this (you can use any of the number formatting functions like NUM2STR, SPRINTF, MAT2STR, or any other..)
y = cool(7);
bar(y(:,1)*1e6)
set(gca, 'YTickMode','manual')
set(gca, 'YTickLabel',num2str(get(gca,'YTick')'))
However there seems to be a bug when it comes to the Z-axis (the labels are correctly formatted, but the exponential multiplier is still showing for some reason!)
y = cool(7);
bar3(y*1e6, 'detached')
set(gca, 'ZTickMode','manual')
set(gca, 'ZTickLabel',num2str(get(gca,'ZTick')'))
Finally, there's another workaround where we replace the tick labels with text objects (see this technical solution page as reference):
y = cool(7);
bar3(y*1e6, 'detached')
offset = 0.25; Xl=get(gca,'XLim'); Yl=get(gca,'YLim'); Zt=get(gca,'ZTick');
t = text(Xl(ones(size(Zt))),Yl(ones(size(Zt)))-offset,Zt, num2str(Zt')); %#'
set(t, 'HorizontalAlignment','right', 'VerticalAlignment','Middle')
set(gca, 'ZTickLabel','')
One other trick you can try is to scale your data before you plot it, then scale the tick labels to make it appear that it is plotted on a different scale. You can use the function LOG10 to help you automatically compute an appropriate scale factor based on your plotted values. Assuming you have your data in variables x and y, you can try this:
scale = 10^floor(log10(max(y))); %# Compute a scaling factor
plot(x,y./scale); %# Plot the scaled data
yTicks = get(gca,'YTick'); %# Get the current tick values
set(gca,'YTickLabel',num2str(scale.*yTicks(:),'%.2f')); %# Change the labels
One way to get better control over tick labels, and to avoid the exponential formatting, is to use TICK2TEXT from the File Exchange.
Here's an example:
y = cool(7); %# define some data
ah = axes; %# create new axes and remember handle
bar3(ah,y*1E6,'detached'); %# create a 3D bar plot
tick2text(ah, 'ztickoffset' ,-1.15,'zformat', '%5.0f', 'axis','z') %# fix the tick labels
Related
I want the scale to be x10^10 not 10^9. How can I change this.
Consider this example:
x = linspace(0,5,1000);
y = 10^10*(exp(x).*sin(20*x));
plot(x,y)
grid on
grid minor
which produces the following plot with automatic limits:
by modifying the axes properties, you can define your own exponent:
ax = gca;
ax.YAxis.Exponent = 10;
obtaining this:
Please read the Matlab documentation for further explanation
There might be an axes property for this, I don’t know. But the simple solution is to plot y * 1e-10, and then add the “10^10” in the axis label, next to the units (“H2 Volume in Reservoir (10^10 m^3)”). I have always preferred it that way, and it is the more common way to present data.
Note that you can use LaTeX formatting in axis labels to properly show powers and so on.
I need to plot two plots on same figure in MATLAB.
The maximum and minimum values in both the data samples have large variation, which I am unable to plot by taking same y-axis limits.
I do not wish to use two scales as explained in other Overlaying two axes in a Matlab plot but need to use a single y-axis and get the solution.
I tried the code:
x_axis_X = 1:length(S);
y_axis_Y = 1:length(N);
ylim([-1204200 -1841.6])
set(gcf,'color','w');
plot(x_axis_X, S,'o-', y_axis_Y, N, 'x-');
The result is as shown in the plot where one data sample is plotted without proper y-axis range.
The y limits for first data sample is -1204200 to -1841.6 and for the second it is -489429345.5 to -10408189.43.
How should be the ylim defined to fit both plots in the same figure?
I appreciate your inputs. Thank you.
In older versions of MATLAB use the function plotyy. In more recent versions of MATLAB use yyaxis. The following is the example from the documentation:
x = linspace(0,10);
y = sin(3*x);
yyaxis left
plot(x,y)
z = sin(3*x).*exp(0.5*x);
yyaxis right
plot(x,z)
ylim([-150 150])
I tried the idea of scaling one dataset so that it has a similar magnitude as the other data set. Here, I multiplied one dataset by 100 (or any suitable scaling parameter), and then it will be similar in size to the other data set. In order to clearly mention which data has been scaled in the graph I used the legend.
plot(x,data1,x,100*data2)
legend('data1','100*data2','location','southeast')
Thank you.
Scaling is not the best option, as you may need to work with the data later. Also does not work if for instance, you need a log scale.
Matlab has a few ways to deal it with. I particularly like to use a new axes in the figure, as i have done in the example below.
Just in case, you also found this answer in a simple google search!
Code:
a=1:10;
b=(10:-1:1)*100;
x=1:10;
hold on
plot(x,a,'b')
pax1=get(gca,'Position'); %get axis position
ax2 = axes('Position',pax1); %create a new axis
plot(ax2,x,b,'r') %plot new data
set(ax2, 'Yaxislocation','right',...
'color','none') % set it transparent and to the right
I am plotting on a very small scale from a loop that generates a vector, data. Anyway, the YTickLabel is automatically in "6x10-3" format, for example.
data = [0.0004578945622489441 0.00154798436685536652442 0.005987463212456878422336324 0.003651558742652333624455];
plot(data)
I know I can use the following to have the full tick label displayed:
yt = get(gca,'YTick');
set(gca,'YTickLabel', sprintf('%.4f|',yt))
However, because these numbers are generated from my loop, they are very long (~20 digits) and so this displays them in full. I need to somehow round my ticks? (Without doing it manually using YTickLabel = {'0.0001', '0.0002'}; ... etc.)
The following works for me:
set(gca, 'YTickLabel', get(gca, 'YTick'))
In Matlab R2014b you could also use
ax = gca;
ax.YTickLabel = ax.YTick;
Either way, what this does is assign the YTick values to the YTickLabel. Somehow that prevents scientific notation.
I struggle a little bit with overlapping axis numbers of the y and x axis like it is shown in the image. I'd like to keep the size of the numbers and therefore think that simply shifting the numbers away from the axis itself would be an appropriate way to handle this issue.
Is there a possibility to do that?
Thanks in advance,
Joe
Here is a little workaround using text annotations. Basically you clear the current XTick labels and replace them with similar labels, but you can specify the distance from the axis:
clc
clear
close all
x = 1:20;
hPlot = plot(x,sin(x));
set(gca,'xaxisLocation','top');
set(gca,'XTickLabel',[]); %// Clear current XTickLabel
ylim = get(gca,'YLim'); %// Get y limit of the plot to place your text annotations.
for k = 2:2:20
text(k,ylim(2)+0.1,num2str(k),'HorizontalAlignment','Center') %// Play with the 'ylim(1) -0.1' to place the label as you wish.
end
Giving this:
Of course now it's exaggerated and you can do the same for the y axis if you want (using the 'XLim' property of the current axis,gca).
Suppose that I have 2 figures in MATLAB both of which plot data of size (512x512), however one figure is being plotted by an external program which is sets the axis parameters. The other is being plotted by me (using imagesc). Currently the figures, or rather, the axes are different sizes and my question is, how do I make them equal?.
The reason for my question, is that I would like to export them to pdf format for inclusion in a latex document, and I would like to have them be the same size without further processing.
Thanks in Advance, N
Edit: link to figures
figure 1: (big)
link to smaller figure (i.e. the one whose properties I would like to copy and apply to figure 1)
For this purpose use linkaxes():
% Load some data included with MATLAB
load clown
% Plot a histogram in the first subplot
figure
ax(1) = subplot(211);
hist(X(:),100)
% Create second subplot
ax(2) = subplot(212);
Now link the axes of the two subplots:
linkaxes(ax)
By plotting on the second subplot, the first one will adapt
imagesc(X)
First, you have the following:
Then:
Extending the example to images only:
load clown
figure
imagesc(X)
h(1) = gca;
I = imread('eight.tif');
figure
imagesc(I)
h(2) = gca;
Note that the configurations of the the first handle prevail:
linkaxes(h)
1.Get the handle of your figure and the axes, like this:
%perhaps the easiest way, if you have just this one figure:
myFigHandle=gcf;
myAxHandle=gca;
%if not possible, you have to search for the handles:
myFigHandle=findobj('PropertyName',PropertyValue,...)
%you have to know some property to identify it of course...
%same for the axes!
2.Set the properties, like this:
%set units to pixels (or whatever you prefer to make it easier to compare to the other plot)
set(myFigHandle, 'Units','pixels')
set(myAxHandle, 'Units','pixels')
%set the size:
set(myFigHandle,'Position',[x_0 y_0 width height]) %coordinates on screen!
%set the size of the axes:
set(myAxHandle,'Position',[x_0 y_0 width height]) %coordinates within the figure!
Ok, based on the answer of #Lucius Domitius Ahenoba here is what I came up with:
hgload('fig1.fig'); % figure whose axis properties I would like to copy
hgload('fig2.fig');
figHandles = get(0,'Children');
figHandles = sort(figHandles,1);
ax(1) = findobj(figHandles(1),'type','axes','-not','Tag','legend','-not','Tag','Colorbar');
ax(2) = findobj(figHandles(2),'type','axes','-not','Tag','legend','-not','Tag','Colorbar');
screen_pos1 = get(figHandles(1),'Position');
axis_pos1 = get(ax(1),'Position');
set(figHandles(2),'Position',screen_pos1);
set(ax(2),'Position',axis_pos1);
This is the 'before' result:
and this is the 'after' result:
Almost correct, except that the aspect ratios are still off. Does anybody know how to equalize everything related to the axes? (I realize that I'm not supposed to ask questions when posting answers, however adding the above as a comment was proving a little unwieldy!)