The below mentioned is the calculation field to fetch the prior months.
CASE [TimeFrame]
when 'DateMonth' then if [Months between today and Date]=0 then 'show' end
when 'Last2Months' then if [Months between today and Date]>=0 and [Months between today and Date]<=1 then 'show' end
when 'Last3Months' then if [Months between today and Date]>=0 and [Months between today and Date]<=2 then 'show' end
else 'hide'
end
The above mentioned Calculation is working as expected for Last2Months and Last3Months but its not showing any result for the current month.
Example if the user selects 11/1/2015 then,
DateMonth should be November--currently no data is shown...
Last2Months should be November and October--working as expected
Last3Months should be November,October and September --working as expected.
Also i need to add up the months as rolling sum and display automatically instead of the drop down selected.
Please find the twbx attached.
Any inputs would greatly be appreciated.
You have IF statements within your CASE statement that do not have an ELSE which means you will get some NULLs in certain cases (they will not be caught by the ELSE in your CASE).
I would rewrite like this. See if this gets you your results:
IF [TimeFrame] = 'DateMonth' AND [Months between today and Date] = 0 THEN 'show'
ELSEIF [TimeFrame] = 'Last2Months' AND [Months between today and Date] >= 0 AND [Months between today and Date] <= 1 THEN 'show'
ELSEIF [TimeFrame] = 'Last3Months' AND [Months between today and Date] >= 0 AND [Months between today and Date] <= 2 THEN 'show'
ELSE 'Hide'
END
Related
Power BI Desktop
Version: 2.73.5586.984 64-bit (September 2019)
I am creating a calculated column to determine if a ticket has been completed in a "Current" or "Backlog" state. Our reporting period month goes from the 26th of the month to the 25th. If a ticket was completed in the reporting period m/26 - m/25 it would be considered "Current." If the ticket was completed outside of that time frame then it would be "Backlog." Also, if the current ticket has not been completed but still has the possibility of being completed in the same reporting period then that would be listed as "Current", but if it goes on to the next reporting month then it would be "Backlog."
Example:
Created 1/1/2021 & Completed 1/10/2021 = Current
Created 1/1/2021 & Completed 3/18/2021 = Backlog
Created 1/25/2021 & Completed 1/26/2021 = Backlog
Created 4/20/2021 & Not Completed & Today [4/30/2021] = Backlog
Created 4/29/2021 & Not Completed & Today [4/30/2021] = Current
I have written the following DAX to handle this but I seem to run into issues after the end/at the start of the reporting period, where the calculations don't work properly and everything lists as either current or backlog.
I also have a helper column in my Date Table that determines what the current reporting period is based on the current day, but I am not using it in this formula, but can if it would make it more efficient.
What is a better/proper way to do this?
Current/Backlog Caluclated Column:
Current_Backlog =
VAR CreatedDay = Day(IR_SR[Created_Date])
VAR CompletedDay = Day(IR_SR[Completed_Date])
VAR CreatedMonth = Month(IR_SR[Created_Date])
VAR CompletedMonth = Month(IR_SR[Completed_Date])
VAR CreatedMonthAdd = Month(IR_SR[Created_Date])+1
VAR CompletedMonthAdd = Month(IR_SR[Completed_Date])+1
VAR CurrentMonth = Month(TODAY())
VAR CurrentMonthAdd = Month(TODAY())+1
VAR CurrentDay = Day(TODAY())
RETURN
//If the date the ticket was completed is before the 26th and the created and completed month match, mark as current
IF(CompletedDay < 26 && CreatedMonth = CompletedMonth, "Current",
//If the completed date is after or equal to the 26th see if the created month plus one and completed month plus one match, mark as current
IF(CreatedDay >= 26 && CompletedDay >= 26 && CreatedMonthAdd = CompletedMonthAdd, "Current",
//If the completed date is after or equal to the 26th and the created date is after or equal to the 26th see if the created and completed month plus one match, mark as current
IF(CreatedDay >= 26 && CreatedMonthAdd = CompletedMonth, "Current",
//If the ticket is not completed and the created date is less then the 26th and the created month and current month match, mark as current
IF(IR_SR[Open/Closed] = "Open" && CurrentDay < 26 && CreatedDay < 26 && CreatedMonth = CurrentMonth, "Current",
//If the ticket is not completed and the created date is greater then the 26th and the created month and current month match plus one, mark as current
IF(IR_SR[Open/Closed] = "Open" && CurrentDay >= 26 && CurrentDay < 1 && CreatedDay >= 26 && CreatedMonthAdd = CurrentMonthAdd, "Current",
IF(IR_SR[Open/Closed] = "Open" && CurrentDay < 26 && CurrentDay >= 1 && CreatedDay >= 26 && CreatedMonthAdd = CurrentMonth, "Current",
"Backlog"))))))
Current Reporting Month:
= Table.AddColumn(#"Inserted Day Name", "Reporting_Period", each if Date.Day([Date]) >= 26
then Date.StartOfMonth(Date.AddMonths([Date], 1))
else Date.StartOfMonth([Date]))
an advice in this case. Compare both DAX formula in the performance analyizer inside Power BI and check how much time spent the calculation.
I guess all your data are imported, in this case data are cached, so first problem about performance is solved.
Anyway, paste second part of your DAX code and I'll check it.
Thanks
This question already has an answer here:
Weekend extraction in Matlab
(1 answer)
Closed 6 years ago.
I were able to successfully made a schedule in which the output is 1 if time is between 7 AM-5PM and otherwise 0, time is based on my computer. However the day Monday-Sunday is based on my computer as well.. I cant find the solution to put an output 1 on Monday-Saturday and output 0 on Sunday. The code I have is below
function y = IsBetween5AMand7PM
coder.extrinsic('clock');
time = zeros(1,6);
time = clock;
current = 3600*time(4) + 60*time(5) + time(6); %seconds passed from the beginning of day until now
morning = 3600*7; %seconds passed from the beginning of day until 7AM
evening = 3600*17; %seconds passed from the beginning of day until 5PM
y = current > morning && current < evening;
end
Now the time here is correct already what I need is for the day (Monday-Sunday) to have my needed output. Also this matlab code is inside a matlab function on Simulink block.
If you use weekday like this, you can generate a 0/1 value as you specified for today's date:
if (weekday(now) > 1)
day_of_week_flag = 1;
else
day_of_week_flag = 0;
or if you like, this one-liner does the same thing, but may not be as easy to read if you're not familiar with the syntax:
day_of_week_flag = ( weekday(now) > 1);
You can also use date-strings like this to convert other dates:
day_of_week_flag = ( weekday('01-Mar-2016') > 1 )
Finally, if you have a numeric array of date/time values, like [2016 3 3 12 0 0], you first need to convert to a serial date using datenum, then use weekday:
time = clock;
day_of_week_flag = ( weekday(datenum(time)) > 1);
An alternate way to check without using weekday is the following:
time = clock;
day_of_week = datestr(time, 8);
if (day_of_week == 'Sun')
day_of_week_flag = 0;
else
day_of_week_flag = 1;
I'm currently working with jquery FullCalendar plugin to create a specific calendar.
One of my tasks I have to work out is how to get any given specific day for the month.
I'm currently using Coldfusion 10 for the server side so I'm wondering is there any specific way of getting every instance of a Tuesday into an array of dates?
Ideally I would like to do this on the server side and populate the calendar plugin.
My issue is primarily trying to source every specific day of a calendar month.
Any advice greatly appreciated.
The firstXDayOfMonth() UDF on CFLlib allows you to find the first of a given day-of-week in a given month. From there you just need to loop from that date adding 7 each iteration until the month is no long the selected month.
theMonth = month(now());
startDate = firstXDayOfMonth(3, theMonth, year(now()));
tuesdays = [];
for (date=startDate; month(date) == theMonth; date +=7){
arrayAppend(tuesdays, dateAdd("s",0, date)); // this just converts date from a number back to a date
}
writeDump(tuesdays);
Update:
Actually the approach for that UDF on CFLib is terrible. Use this variation instead:
function firstXDayOfMonth(dayOfWeek,month,year){
var firstOfMonth = createDate(year, month,1);
var dowOfFirst = dayOfWeek(firstOfMonth);
var daysToAdd = (7 - (dowOfFirst - dayOfWeek)) MOD 7;
var dow = dateAdd("d", daysToAdd, firstOfMonth);
return dow;
}
I'll update the UDF on cflib a bit later: I need to write some decent unit tests for it first, and am a bit busy # the moment.
The Short Version:
At this time, there is not a function in CF that gets all the Tuesdays. But here's an easy way to do it:
// assuming a year and month are defined already
var firstDayOfMonth = createDate( year, month, 1 );
var targetDayOfWeek = 3; // Tuesday is 3 if Sunday is 1
var dayOfWeekArray = []; // This is the outcome.
// loop through each day of the month adding the target days to the array.
for( i = 1; i LTE daysInMonth( firstDayOfMonth ); i++){
var loopingDate = createDate( year, month, i );
if( dayOfWeek( loopingDate ) == targetDayOfWeek ){
ArrayAppend( dayOfWeekArray, loopingDate );
}
}
dayOfWeekArray is an array of every Tuesday of a month.
More Detail:
Your title and post seem to conflict as far as what you're looking for, so I'm going to stick with the title, since that's why I came here...
Here's what you can do to find all the Tuesdays in a month:
Create a date Object
Loop through the days in the target month using the date Object
If the current day is Tuesday, add it to an array
Boom, you got all the Tuesdays of a month in an array
Here's the code I used (cfscript):
// assuming a year and month are defined already
var firstDayOfMonth = createDate( year, month, 1 );
var dayOfWeekArray = [];
var targetDayOfWeek = 3; // Tuesday is 3 if Sunday is 1. Do a quick writeDump in the loop if you're not sure.
for( i = 1; i LTE daysInMonth( firstDayOfMonth ); i++){
var loopingDate = createDate( year, month, i );
if( dayOfWeek( loopingDate ) == targetDayOfWeek ){
ArrayAppend( dayOfWeekArray, datePart( "d", loopingDate );
// ArrayAppend( dayOfWeekArray, loopingDate ); - use this if you'd rather have the whole date object
}
}
This gives you dayOfWeekArray which will be the date of each Tuesday of a particular month. For instance, this month (Jan 2019) will be [1, 8, 15, 22, 29]. You can change this to be the entire date object if you want - that's what I did in the short version at the top.
I have a simple problem but I can't seem to find an anwser.
I want to execute code:
if current date < 1 April then
do stuff
else
do other stuff
end if
I thought it was pretty easy, since I can get date and format it my way, but problem is when user has different Date format. I did something like this:
Private Sub UserForm_Initialize()
Dim rok As Long, rok_kontrola As Date
rok = Format(Date, "yyyy")
rok_kontrola = Format(Date, "dd-mm-yyyy")
If rok_kontrola < "01-04-" & rok Then
Me.Controls("rok1").Value = True
Else
Me.Controls("rok2").Value = True
End If
End Sub
Try this one:
If Date < DateSerial(Year(Date), 4, 1) Then
Me.Controls("rok1").Value = True
Else
Me.Controls("rok2").Value = True
End If
In Calabash Automation testing on iPhone. I need to select a date from a date picker. Please guide me with a ruby step definition.
I want something like
Then I scroll datepicker to date "2002-10-22"
I made a solution after some research. This code is not bulletproof but it works fine for me. I guess someone will get a help from this. if anyone knows how to improve this. please add it here.
In step definitions I add..
Then /^I scroll datepicker to date "1985-01-01"
# Date Format "1985-01-01"
# make sure date picker is up
should_see_date_picker()
is_picker_in_date_mode()
maxdate = picker_maximum_date_time()
target = Date.parse(target_date)
current = Date.parse(datequery())
if(maxdate<target)
screenshot_and_raise "Target date'#{target}' is larger than maximum date'#{maxdate}' in date picker"
end
limit = 100
# => set year
count = 0
dir = (target.year < current.year) ? "down" : "up"
until (target.year == Date.parse(datequery()).year) or (count==limit) do
date = Date.parse(datequery())
scroll_date_component(dir, 2, date.year)
# puts("Inside the loop1 '#{count}'=> '#{date.year}'" )
count += 1
end
# => set month
count = 0
dir = (target.month < current.month) ? "down" : "up"
until (target.month == Date.parse(datequery()).month) or (count==limit) do
date = Date.parse(datequery())
scroll_date_component(dir, 0, date.month)
# puts("Inside the loop2 '#{count}'=> '#{date.month}'" )
count += 1
end
# => set day
count = 0
dir = (target.day < current.day) ? "down" : "up"
until (target.day == Date.parse(datequery()).day) or (count==limit) do
date = Date.parse(datequery())
scroll_date_component(dir, 1, date.day)
# puts("Inside the loop3 '#{count}'=> '#{date.day}'" )
count += 1
end
end
#########################################################
# => ##### Date picker helper methods. #####
def scroll_date_component(direction, column, component)
if(column==0)
# => Month scroll needs the month name string
if (direction.eql? "up")
month_str = Date::MONTHNAMES[component+1]
touch("pickerView scrollView index:#{column} label text:'#{month_str}'")
elsif (direction.eql? "down")
month_str = Date::MONTHNAMES[component-1]
touch("pickerView scrollView index:#{column} label text:'#{month_str}'")
end
else
# => Day and year scrolls are numeric
if (direction.eql? "up")
touch("pickerView scrollView index:#{column} label text:'#{component + 1}'")
elsif (direction.eql? "down")
touch("pickerView scrollView index:#{column} label text:'#{component - 1}'")
end
end
sleep(0.3)
end
def datequery()
return query("datePicker","date").first
end
def should_see_date_picker ()
if query("datePicker", :date).empty?
screenshot_and_raise "Could not find date picker"
end
end
def is_picker_in_date_mode()
res = query("datePicker", :datePickerMode)
screenshot_and_raise "expected to see a date picker" if res.empty?
screenshot_and_raise "expected to see UIDatePickerModeDate" if res.first!=1
end
def picker_maximum_date_time()
res = query("datePicker", :maximumDate)
screenshot_and_raise "expected to see a date picker" if res.empty?
return DateTime.parse(res.first) if (res.first)
end
That gist mentioned by Chathura is very out of date.
Calabash iOS now supports interaction with most date pickers natively.
https://github.com/calabash/calabash-ios/blob/develop/calabash-cucumber/features/step_definitions/calabash_steps.rb#L406
Scenario: I should be able to use the predefined steps to change the picker time
Then I change the date picker time to "10:45"
Scenario: I should be able to use the predefined steps to change the picker date
Then I change the date picker date to "July 28 2009"
Scenario: I should be able to use the predefined steps to change the picker date and time
Then I change the date picker date to "July 28" at "15:23"