I am attempting to install PgBouncer on my computer with no success. In the installation page, im told that PgBouncer has two dependencies GNU Make 3.81+ and libevent 2.0. Never having used or heard of these two software before, Im completely lost.
I have read a little on both but have yet to find or fully understand what they actually do and how they will help me set up PgBouncer. From what I've read, PgBouncer does not come compiled for windows and I need the other two to compile it. I have searched for tutorials online but it seems that im falling into a black hole of misunderstanding.
Im looking for a simple explanation on how to install PgBouncer or how these software work with one another. Thanks.
If anyone now searches the binaries because http://winpg.jp/~saito/pgbouncer is offline now, check out my page under https://sepppenner.github.io/PgBouncerWinBinaries/. I have all the binaries from the Saito page but didn't yet succeed to build the project on my own. If anyone has ideas, don't hesitate to contact me here or on Github :)
EDIT: I'm now able to build pgbouncer for windows just having some issues with the pandoc thing (Follow https://github.com/pgbouncer/pgbouncer/issues/442). I will provide binaries soon. The instructions are already online under the page listed above :)
Im looking for a simple explanation on how to install PgBouncer
A little late, but if you use the EDB installer for PostgreSQL, as linked on postgresql.org (https://www.postgresql.org/download/windows/), you can install Stack Builder. From inside Stack Builder, PgBouncer can be installed (EDB build).
Unfortunately, it's not the latest version. Now, PgBouncer 1.17.0 is available and Stack Builder provides 1.16.1.
Personally, I don't understand why the PgBouncer project doesn't just offer a Windows build. So everybody would be able to get the latest release.
I have not messed with pgbouncer in years but have had multiple comments on what I did to solve my problem.
In the link bellow is the pgbouncer build I last used on my project. From what I remember, all you would need to do is replace the users in the config/user.txt with yours and go into config/pgbouncer.ini and change the configuration to work with your set up. To start it, just run the run.bat file or pgbouncer.exe config/pgbouncer.iniin the cmd prompt. You want to download everything in the folder.
https://drive.google.com/open?id=1f8MjdQCq-ryQBiJ85d4hABASFfR_6fA2
Related
I'm really in trouble having Wincc RT Professional running on my computer. It has consistently come with an error "Compilation not possible. the "WinCC" SQL instance is either not running or not available" anytime I compile it. I searched that it dues to SQL server (WINCC) is not running so I was gonna enable it in Sql server configuration manager but it didn't have such thing like that in the list of SQL Server services. How can I install it manually or make Wincc Pro run successfully? I'm using TIA Portal V14 that worked well with Wincc RT Advanced and the SIMATIC WinCC Runtime Professional has also installed formerly. Hope this description enough and clear for you. Thanks in advance.
This error has been reported a number of times on the Siemens forums. Unfortunately, it seems every time the forum users stop short of saying what they did to fix it (or they didn't fix it)...
As you may have guessed, the backbone of WinCC RT Professional is a Microsoft SQL Server database, although what flavor and version of SQL they embed in their product, I'm not sure.
Your installation has gone bad in some way. Sorry that's not a helpful description, but it's hard to tell why without further information, so here are some fault finding steps I would take.
If you haven't done so already, have a quick scan of forum to see if you can find a quick fix.
If you were never, ever able to compile with this installation, can I suggest the following as general fault-finding:
A. if a working installation on another machine is available, compare the installs as much as possible to find out what's different. You might find the compatibility tool useful for this: compatibility tool
B. If (A) is not possible, perform a fresh installation on a different machine without any other siemens software, and try to compile.
C. if (B) works, you might have a software conflict. It happens. I thought that the installers for the different flavors of WinCC check for this before installing, but I'm not sure.
Check if your SQL service is started, as shown in the picture below
I'm attempting to setup a new postgresql 9.6 installation. I realize this is not the latest version but, due to some third party limitations, it's what I'm required to use.
The installation itself works just fine and I've been able to get my databases and FDWs installed without issue so I'm confident the database itself is OK.
The issue I'm having now is that I need to create a couple of scheduled jobs. pgAgent seems to be a good option, I thought, however it's not showing as an option in the Stack Builder list.
I suppose I could go the route of installing it from source, but that's beginning to be way more work than I had hoped to have to do. Is there something I may be missing when doing the install? I'm a bit stymied at this point. Here's a shot of the screen that I'm seeing:
Again, this is a 9.6 install and, according to the docs, pgAgent should be an option, right?
Any insights are appreciated.
I just bought a new MacBook Pro 2016 Edition about 2 weeks ago.
I installed a bunch of applications and software so far by copying them into Applications Folder as well as by following installer wizard.
Now today I tried to install Wireshark using installer wizard. I tried to install teamviewer too later today which also uses installer wizard. And both give me the same error.
I really need to resolve this because I need TeamViewer soon and I'm not finding anyone else facing this issue online anywhere.
Please advise.
Thank you
I also encountered such an error before,to solve it dont copy the pakage to your app folder, but instead open it with admin powers and that should fix the issue.
If you have purchased this software then you can call the tech support, else dont call them it can put you in danger for installing pirated software.
I looked everywhere. Didn't find a viable solution. But then reinstalled the OS. Which didn't affect any of my data or installed application. I got the whole Operating System the same way I left it. But resolved the issue I was facing.
I am currently working with a student on a project using easyPHP 16.1. The program/s install fine, and to begin with we can write & test PHP code with no problem. However, on 2 totally separate PCs we have had the same problem occur. Suddenly, for no apparent reason, pages which were working fail to function and we get the following error:-
Failed to connect to DB. Check that the username is valid.
Plugin '*C06327039E918D3247E4438D3785C723719DC8B5' is not loaded
We can't find any reference to this 'plugin' and wondered what is going on. On my own PC, I initially got round the problem by removing easyPHP then reinstalling it, but the student has several hand-ins depending on testing PHP code, and could do without the hassle of repeatedly having to 'fix' the installation. Is there a fix? Is it an easy fix? If there's no fix, should we just use an alternative like WAMP?
This has been a serious issue for Easyphp since ver11.
so for me, after some time of use, I've just dropped using easyphp and switched over to WAMP.
From ver 16.1, Easyphp works in "portable mode" and becomes totally browser-based...
For a simple solution, I'd recommend to check out for alternate mySQL versions in your system, which can be interfering in the same port. Changing the Port No. can be useful in this case...
I am a newbie to Xen and want to download it on my machine which currently has CentOS7. I have been researching and experimenting for a couple of days but can't seem to find a straightforward answer on how to install a fully functioning Xen on CentOS7. I tried using the workaround at http://www.lairdscomputer.com/Blog/tabid/62/EntryId/74/Installing-Xen-4-on-Centos-7.aspx, but it seems that some of the packages it uses might be outdated.
Is it even possible to install Xen on CentOS7, even if it is missing some parts to it? Would it be better just to go back to CentOS6.x so that I can install Xen4CentOS?
Thanks in advance! Any advice is appreciated!
Afaik RedHat therefore CentOS is not supporting Xen whoever in fact it is possible.
I am using xen4centos on my Centos7 server, it was installed along with official article from wiki:
https://wiki.centos.org/HowTos/Xen/Xen4QuickStart
It it is not, please provide some logs, errors etc