I am using below code in AIX and the problem is it attaches the file at the very beginning of the mail, I want to attach the file after the mail body.
(uuencode <filepath> <filename-in-mail>;cat <body-of-the-mail-file>) | mailx -s "Subject" -r <sender-address> <multiple-receiver-addresses>
Any thoughts?, On AIX only uuencode is working, base64 or any other command doesn't work.
I tried a lame change in the code uuencode cat <body-of-the-mail-file>;<filepath> <filename-in-mail> but it gave error
How can I prepend a start-tag to the content of a text file, append it with an end-tag and redirect the output to an XML file in command line?
For DOS:
echo "<tag>" > file.xml
type file.txt >> file.xml
echo "</tag>" >> file.xml
> will create the file, or truncate it if it exists, and >> will append to it.
I am attempting to add the x-header X-APP-VOLT: Yes to the header of my email with a .tar attachment. I only have access to usr/sbin/sendmail and mailx. I do not have root access so I can't download other versions of mailx or mutt.
I can add the x-header to usr/sbin/sendmail using the below code, but I can't figure out how to add the .tar attachment.
/usr/sbin/sendmail -i -- toemail << END
To: toemail
Subject: Test
X-APP-VOLT: Yes
Hope this works! END
I can attach a .tar file to mailx using the the below code, but I can't figure out how to add a x-header. My mailx also does not have the -a option.
cat file | uuencode filename | mailx -s "Test" toemail
Thank you
One way is to construct your input in a temporary file:
cat > tmpfile$$ << END
To: toemail
Subject: Test
X-APP-VOLT: Yes
Hope this works!
END
uuencode filename < file >> tmpfile$$
/usr/sbin/sendmail -i -- toemail < tmpfile$$
Also, I usually use sendmail's -t flag in this case, rather than repeating the recipient:
/usr/sbin/sendmail -i -t < tmpfile$$
If you don't want to use a temporary file, if you want to use a pure pipeline, you can use ( ) to create a subshell to do the construction:
(
echo "To: toemail"
echo "Subject: Test"
echo "X-APP-VOLT: Yes"
echo
echo "Hope this works!"
echo
uuencode filename < file
) | /usr/sbin/sendmail -i -t
(Of course, these days most recipients will probably find it easier to deal with MIME attachments rather than uuencode. It's pretty straightforward to create MIME attachments with a shell script, also.)
I'm trying to execute an Unix shell script to generate emails using mailsend. I need to format this as an HTML file using it's content type
My script as follows,
sender="xxxx#xxxx.com"
subject="My Subject"
server=000.000.000.000
message=`cat fun.txt`
email_add="test#test.com"
nohup ./mailsend -f $sender -t $email_add -u "$subject" -m "$message" -s $server
-l fcbulog
How can I achieve the HTML formatted email by using above script
You could set Content-Type to text/html and then just use the your html as body of the message.
I have a script that runs on cron that outputs some text which we send to the 'mail' program. The general line is like this:
./command.sh | mail -s "My Subject" destination#address.com -- -F "Sender Name" -f sender#address.com
The problem is that the text generated by the script has some special characters - é, ã, ç - since it is not in english. When the e-mail is received, each character is replaced by ??.
Now I understand that this is most likely due to the encoding that is not set correctly. What is the easiest way to fix this?
My /usr/bin/mail is symlinked to /etc/alternatives/mail which is also symlinked to /usr/bin/bsd-mailx
I had to specify myself the encoding in the mail header. (The -S is not supported here.)
cat myutf8-file | mail -a "Content-Type: text/plain; charset=UTF-8" -s "My Subject" me#mail.com
You're right in assuming this is a charset issue. You need to set the appropriate environment variables to the beginning of your crontab.
Something like this should work:
LANG=en_US.UTF-8
LC_CTYPE=en_US.UTF-8
Optionally use LC_ALL in place of LC_CTYPE.
Reference: http://opengroup.org/onlinepubs/007908799/xbd/envvar.html
Edit: The reason it displays fine when you run it in your shell is probably because the above env vars are set in your shell.
To verify, execute 'locale' in your shell, then compare to the output of a cronjob that runs the same command.
Re-Edit: Ok, so it's not an env var problem.
I am assuming you're using mailx, as it is the most common nowdays. It's manpage says:
The character set for outgoing
messages is not necessarily the same
as the one used on the terminal. If an
outgoing text message contains
characters not representable in
US-ASCII, the character set being used
must be declared within its header.
Permissible values can be declared
using the sendcharsets variable,
So, try and add the following arguments when calling mail:
-S sendcharsets=utf-8,iso-8859-1
Just to give additional information to KumZ answer:
if you need to specify more headers with the -a switch, feel free to add them up, like this (note the polyusage of -a).
echo /path/to/file | mail -s "Some subject" recipient#theirdomain.com -a "From: Human Name <noreply#mydomain.com>" -a "Content-Type: text/plain; charset=UTF-8"
i've written a bash function to send an email to recipients. The function send utf-8 encoded mails and work with utf-8 chars in subject and content by doing a base64 encode.
To send a plain text email:
send_email "plain" "from#domain.com" "subject" "contents" "to#domain.com" "to2#domain.com" "to3#domain.com" ...
To send a HTML email:
send_email "html" "from#domain.com" "subject" "contents" "to#domain.com" "to2#domain.com" "to3#domain.com" ...
Here is the function code.
# Send a email to recipients.
#
# #param string $content_type Email content mime type: 'html' or 'plain'.
# #param string $from_address Sender email.
# #param string $subject Email subject.
# #param string $contents Email contents.
# #param array $recipients Email recipients.
function send_email() {
[[ ${#} -lt 5 ]] && exit 1
local content_type="${1}"
local from_address="${2}"
local subject="${3}"
local contents="${4}"
# Remove all args but recipients.
shift 4
local encoded_contents="$(base64 <<< "${contents}")"
local encoded_subject="=?utf-8?B?$(base64 --wrap=0 <<< "${subject}")?="
for recipient in ${#}; do
if [[ -n "${recipient}" ]]; then
sendmail -f "${from_address}" "${recipient}" \
<<< "Subject: ${encoded_subject}
MIME-Version: 1.0
From: ${from_address}
To: ${recipient}
Content-Type: text/${content_type}; charset=\"utf-8\"
Content-Transfer-Encoding: base64
Content-Disposition: inline
${encoded_contents}"
fi
done
return 0
} # send_message()
You may use sendmail command directly without mail wrapper/helper.
It would allow you to generate all headers required for "raw" UTF-8 body
(UTF-8 is mentioned in asker's comments),
WARNING-1:
Non 7bit/ASCII characters in headers (e.g. Subject:,From:,To:) require special encoding
WARNING-2:
sendmail may break long lines (>990 bytes).
SENDER_ADDR=sender#address.com
SENDER_NAME="Sender Name"
RECIPIENT_ADDR=destination#address.com
(
# BEGIN of mail generation chain of commands
# "HERE" document with all headers and headers-body separator
cat << END
Subject: My Subject
From: $SENDER_NAME <$SENDER_ADDR>
To: $RECIPIENT_ADDR
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
END
# custom script to generate email body
./command.sh
# END of mail generation chain of commands
) | /usr/sbin/sendmail -i -f$SENDER_ADDR -F"$SENDER_NAME" $RECIPIENT_ADDR
rfc2045 - (5) (Soft Line Breaks) The Quoted-Printable encoding REQUIRES that encoded lines be no more than 76 characters long. For bash shell script code:
#!/bin/bash
subject_encoder(){
echo -n "$1" | xxd -ps -c3 |awk -Wposix 'BEGIN{
BASE64 = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"
printf " =?UTF-8?B?"; bli=8
}
function encodeblock (strin){
b1=sprintf("%d","0x" substr(strin,1,2))
b2=sprintf("%d","0x" substr(strin,3,2))
b3=sprintf("%d","0x" substr(strin,5,2))
o=substr(BASE64,b1/4 + 1,1) substr(BASE64,(b1%4)*16 + b2/16 + 1,1)
len=length(strin)
if(len>1) o=o substr(BASE64,(b2%16)*4 + b3/64 + 1,1); else o=o"="
if(len>2) o=o substr(BASE64,b3%64 +1 ,1); else o=o"="
return o
}{
bs=encodeblock($0)
bl=length(bs)
if((bl+bli)>64){
printf "?=\n =?UTF-8?B?"
bli=bl
}
printf bs
bli+=bl
}END{
printf "?=\n"
}'
}
SUBJECT="Relatório de utilização"
SUBJECT=`subject_encoder "${SUBJECT}"`
echo '<html>test</html>'| mail -a "Subject:${SUBJECT}" -a "MIME-Version: 1.0" -a "Content-Type: text/html; charset=UTF-8" you#domain.net
This is probably not a command line issue, but a character set problem. Usually when sending E-Mails, the character set will be iso-8859-1. Most likely the text you are putting into the process is not iso-8859-1 encoded. Check out what the encoding is of whatever data source you are getting the text from.
Obligatory "good reading" link: The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!)
Re your update: In that case, if you enter the special characters manually, your terminal may be using UTF-8 encoding. You should be able to convert the file's character set using iconv for example. The alternative would be to tell mail to use UTF-8 encoding, but IIRC that is not entirely trivial.
use the option -o message-charset="utf-8", like that:
sendemail -f your_email -t destination_email -o message-charset="utf-8" -u "Subject" -m "Message" -s smtp-mail.outlook.com:587 -xu your_mail -xp your_password
I'm a bit late but none of the previous solutions worked for me.
Locating mail command (CentOS)
# locate mail | grep -v www | grep -v yum | grep -v share
# ls -l /bin/mail
lrwxrwxrwx. 1 root root 22 jul 21 2016 /bin/mail -> /etc/alternatives/mail
# ls -l /etc/alternatives/mail
lrwxrwxrwx. 1 root root 10 jul 21 2016 /etc/alternatives/mail -> /bin/mailx
# ls -l /bin/mailx
-rwxr-xr-x. 1 root root 390744 dic 16 2014 /bin/mailx
So mail command is in fact mailx. This helped with the search that finally took me to this answer at Unix&Linux Stackexchange that states:
Mailx expects input text to be in Unix format, with lines separated by newline (^J, \n) characters only. Non-Unix text files that use carriage return (^M, \r) characters in addition will be treated as binary data; to send such files as text, strip these characters e. g. by tr -d '\015'
From man page and:
If there are other control characters in the file they will result on mailx treating the data as binary and will then attach it instead of using it as the body. The following will strip all special characters and place the contents of the file into the message body
So the solution is using tr command to remove those special characters. Something like this:
./command.sh \
| tr -cd "[:print:]\n" \
| mail -s "My Subject" destination#address.com -- -F "Sender Name" -f sender#address.com
I've used this solution with my command
grep -v "pattern" $file \
| grep -v "another pattern" \
| ... several greps more ... \
| tr -cd "[:print:]\n" \
| mail -s "$subject" -a $file -r '$sender' $destination_email