Say I have the following source and target.
source: c:\temp\folder1\folder2
target: e:\backup
I want to have an output as shown below. As you can see, it should only copy the files and its subdirectories from the above source path but it should also copy/create the parent folders (no files) leading to the source path. How can I accomplish this with Powershell or robocopy? If Powershell doesnt handle long path names then I prefer using Robocopy.
source:
c:\temp
\folder1
\file1.txt
\folder2
\file2.txt
\folder3
\file3.txt
output:
e:\backup
\temp
\folder1
\folder2
\file2.txt
\folder3
\file3.txt
If I have understood you right you want to create any missing folders in the output on the fly. In powershell this would be s.t. like this:
Copy-Item c:\temp e:\backup\temp\ -recurse
Anyone know of a simple batch command to move files and delete empty sub folders? Just got a new external and when I copied everything over it resulted in something like this. F:\Music\John Denver\John Denver\files1-10 F:\Music\TheBeatles\TheBeatles\files1-10 and so on, for say, 350+ folders. I don't want to waste that much time manually moving them up one folder and deleting sub folders... Not all files are same file type, and not all folders are music. Some folders have other sub folders that I want to keep (mostly for music files, such as artist\album\files) Is there a way to do this instead of the old fashioned way? Any help is appreciated.
You can use ROBOCOPY.
ROBOCOPY source destination /S /MOVE
/S flag is used to exclude empty subfolders.
ROBOCOPY "F:\Music\John Denver\John Denver\files1-10" "F:\Music\TheBeatles\TheBeatles\files1-10" /S /MOVE
Need help for xcopy command,
I have a directory structure and wanted to copy few contents of this.
Iam using xcopy for the same but having trouble. My directory structure is below.
I:\Foo\
|
|--coo-->c1-->c2
|--goo-->g1-->g2
|--boo-->b1-->b2
|--fow-->f1-->f2
which in turn contains subfolders and also files.
I want to copy coo and all its subfolder to another location, my xcopy command for the same is,
xcopy I:\Foo\coo e:\temp /e/c/t/h/r/y /s
executing this command copies folders and subfolders from c1-->c2 but folder coo is missing.
-regards,
Manju
xcopy I:\Foo\coo e:\temp copies the contents of coo into temp. If you want to copy coo into e:\temp\coo, you want xcopy I:\Foo\coo e:\temp\coo (assuming temp already exists).
This is more of a user error. xcopy supports a source, a destination, some flags, and an exclude list.
When you use xcopy I:\foo\coo e:\temp, you say that the contents INSIDE the source(I:\foo\coo) should be equal to the contents INSIDE the destination (e:\temp). So you need to use something like:
xcopy I:\foo\coo e:\temp\coo
to make it include the coo folder.
I am trying to xcopy specific folders from some directory to another folder, problem is i don't want to copy all the folders but i want specific folders. E.g. DirectorySource has folders (folderA,folderB,folderC) but i want to copy folderA and folderB only to DirectoryDestination.
Create a text file, say C:\excludes.txt with the following contents:
DirectorySource\folderC\
then you can copy:
xcopy DirectorySource DirectoryDestination /s /i /exclude:C:\excludes.txt
The file excludes.txt contains a list of strings, one per line. If a file or directory matches that string, then it will not be copied. If you want to exclude folder, it is safer to use the above string instead of simply folderC, which might skip a file called folderC_listing.txt
This seems pretty simple and maybe I'm just overlooking the proper flag, but how would I, in one command, copy a file from one directory to another and rename it in the destination directory? Here's my command:
if exist "bin\development\whee.config.example"
if not exist "TestConnectionExternal\bin\Debug\whee.config"
xcopy "bin\development\whee.config.example"
"TestConnectionExternal\bin\Debug\whee.config"
It prompts me with the following every time:
Does TestConnectionExternal\bin\Debug\whee.config specify a file name
or directory name on the target (F = file, D = directory)?
I want to suppress this prompt; the answer is always F.
I use
echo f | xcopy /f /y srcfile destfile
to get around it.
Don't use the xcopy, use copy instead, it doesn't have this issue.
xcopy is generally used when performing recursive copies of multiple files/folders, or when you need the verification/prompting features it offers. For single file copies, the copy command works just fine.
Another option is to use a destination wildcard. Note that this only works if the source and destination filenames will be the same, so while this doesn't solve the OP's specific example, I thought it was worth sharing.
For example:
xcopy /y "bin\development\whee.config.example" "TestConnectionExternal\bin\Debug\*"
will create a copy of the file "whee.config.example" in the destination directory without prompting for file or directory.
Update: As mentioned by #chapluck:
You can change "* " to "[newFileName].*". It persists file extension but allows to rename. Or more hacky: "[newFileName].[newExt]*" to change extension
There is some sort of undocumented feature in XCOPY. you can use:
xcopy "bin\development\whee.config.example" "c:\mybackup\TestConnectionExternal\bin\Debug\whee.config*"
i tested it just today. :-)
Just go to http://technet.microsoft.com/en-us/library/bb491035.aspx
Here's what the MAIN ISSUE is "... If Destination does not contain an existing directory and does not end with a backslash (), the following message appears: ...
Does destination specify a file name
or directory name on the target
(F = file, D = directory)?
You can suppress this message by using the /i command-line option, which causes xcopy to assume that the destination is a directory if the source is more than one file or a directory.
Took me a while, but all it takes is RTFM.
So, there is a simple fix for this. It is admittedly awkward, but it works.
xcopy will not prompt to find out if the destination is a directory or file IF the new file(filename) already exists. If you precede your xcopy command with a simple echo to the new filename, it will overwrite the empty file. Example
echo.>newfile.txt
xcopy oldfile.txt newfile.txt /Y
I met same issue when try to copy file with new name only if file does not exist in destination or exist (with new name), but is older. The solution is to add * char at end of destination file name. Example:
xcopy "C:\src\whee.config.txt" "C:\dest\bee.config.txt*" /D /Y
This is from Bills answer.
Just to be really clear for others.
If you are copying ONE file from one place to another AND you want the full directory structure to be created, use the following command:
xcopy "C:\Data\Images\2013\08\12\85e4a707-2672-481b-92fb-67ecff20c96b.jpg" "C:\Target Data\\Images\2013\08\12\85e4a707-2672-481b-92fb-67ecff20c96b.jpg\"
Yes, put a backslash at the end of the file name and it will NOT ask you if it's a file or directory. Because there is only ONE file in the source, it will assume it's a file.
xcopy src dest /I
REM This assumes dest is a folder and will create it, if it doesnt exists
XCOPY with * at the end of the target to copy files whether they exist or not in destination
XCOPY with \ at the end of the target to copy folders and contents whether exist or not in destination
Alternatively
RoboForm SOURCE DEST FILE for files
RoboForm SOURCE DEST for folders
I had a similar issue and both robocopy and xcopy did not help, as I wanted to suppress the comments and use a different destination filename. I found
type filename.txt > destfolder\destfilename.txt
working as per my requirements.
Back to the original question:
xcopy "bin\development\whee.config.example" "TestConnectionExternal\bin\Debug\whee.config"
could be done with two commands eg:
mkdir "c:\mybackup\TestConnectionExternal\bin\Debug\whee.config\.."
xcopy "bin\development\whee.config.example" "c:\mybackup\TestConnectionExternal\bin\Debug\whee.config\"
By simply appending "\.." to the path of the destination file the destination directory is created if it not already exists. In this case
"c:\mybackup\TestConnectionExternal\bin\Debug\"
which is the parent directory of
the non-existing directory
"c:\mybackup\TestConnectionExternal\bin\Debug\whee.config\.."
At least for WIN7 mkdir does not care if the directory
"c:\mybackup\TestConnectionExternal\bin\Debug\whee.config\"
really exists.
The right thing to do if you wanna copy just file and change it's name at destination is :
xcopy /f /y "bin\development\example.exe"
"TestConnectionExternal\bin\Debug\NewName.exe*"
And it's Gonna work fine
I suggest robocopy instead of copy or xcopy. Used as command or in GUI on clients or servers. Tolerant of network pauses and you can choose to ignore file attributes when copying of copy by file attributes. Oh, and it supports multi-core machines so files are copied much faster in "parallel" with each other instead of sequentially. robocopy can be found on MS TechNet.
For duplicating large files, xopy with /J switch is a good choice. In this case, simply pipe an F for file or a D for directory. Also, you can save jobs in an array for future references. For example:
$MyScriptBlock = {
Param ($SOURCE, $DESTINATION)
'F' | XCOPY $SOURCE $DESTINATION /J/Y
#DESTINATION IS FILE, COPY WITHOUT PROMPT IN DIRECT BUFFER MODE
}
JOBS +=START-JOB -SCRIPTBLOCK $MyScriptBlock -ARGUMENTLIST $SOURCE,$DESTIBNATION
$JOBS | WAIT-JOB | REMOVE-JOB
Thanks to Chand with a bit modifications:
https://stackoverflow.com/users/3705330/chand
Place an asterisk(*) at the end of the destination path to skip the dispute of D and F.
Example:
xcopy "compressedOutput.xml" "../../Execute
Scripts/APIAutomation/Libraries/rerunlastfailedbuild.xml*"
Use copy instead of xcopy when copying files.
e.g.
copy "bin\development\whee.config.example"
"TestConnectionExternal\bin\Debug\whee.config"
Work Around, use ReName... and Name it some Cryptic Name, then ReName it to its Proper Name
C:
CD "C:\Users\Public\Documents\My Web Sites\AngelFire~Zoe\"
XCopy /D /I /V /Y "C:\Users\Public\Documents\My Web Sites\HostGator ~ ZoeBeans\cop.htm"
Ren "cop.htm" "christ-our-passover.htm"
xcopy will allow you to copy a single file into a specifed folder it just wont allow you to define a destination name. If you require the destination name just rename it before you copy it.
ren "bin\development\whee.config.example" whee.config
xcopy /R/Y "bin\development\whee.config"
"TestConnectionExternal\bin\Debug\"
When working with single files , I use both commands.
To copy a file to another existing directory, use copy
copy srcPath\srcFile existingDir\newFile
To copy an existing file to and create new directories, use xcopy
xcopy srcPath\srcFile newDirectoryPath\newFile
To suppress the xcopy 'file or directory' prompt, echo in the response. So for a file copy echo in f.
echo f | xcopy srcPath\srcFile newDirectoryPath\newFile
Note flag /y works in both commands to suppress the confirmation to overwrite the existing destination file.
MS Docs: copy, xcopy
Since you're not actually changing the filename, you can take out the filename from the destination and there will be no questions.
xcopy bin\development\whee.config.example TestConnectionExternal\bin\Debug\ /Y
This approach works well when the destination directory is guaranteed to exist, and when the source may equally be a file or directory.
You cannot specify that it's always a file. If you don't need xcopy's other features, why not just use regular copy?
Does xxxxxxxxxxxx specify a file name
or directory name on the target
(F = file, D = directory)? D
if a File : (echo F)
if a Directory (echo D)