I am adding wsp file as it already exist now I need to update it..
Its giving me a error message on management shell that
A solution with the same name and id already exist.
I am writing this command in management shell.
Add-SPSolution "c:\Deploy\WSP\{file name}.wsp"
Like this
Add-SPSolution "c:\Deploy\WSP\SharePointProject2.wsp"
There are two ways you can achieve this:
Use 'Update-SPSolution' Or
Remove solution using 'Remove-SPSolution' and add again using
'Add-SPSolution'
Related
Post installation of an application it creates a edge extension but by default it is turned off.
Does anyone have solution to enable it using powershell script?
I'm new to powershell to not sure how to and where to start with.
First, test without Powershell.
Add the ID under HKCU\SOFTWARE\Policies\Microsoft\Edge\ExtensionInstallForcelist
Check via edge://extensions
Only manage extensions via either HKCU or HKLM.
More information on Information about extensions.
When this works, you can write the PowerShell code to modify the registry accordingly.
With kind regards,
TheStingPilot
I'm writing a PowerShell script to make some modifications to the Advanced Logging that's already in place on a few servers. The main issue I'm having is with the command below that was generated using Configuration Editor:
.\appcmd.exe set config "wh01-02.testlab.com" -section:system.webServer/advancedLogging/server /+"logDefinitions.[baseFileName='Log404'].filter.condition.[operator='0'].[field='Status',operator='Equals',value='404']" /commit:apphost
When I run this script, I get the following error:
ERROR ( message:Cannot find requested collection element. )
Kinda stumped on this one. Ideas anyone?
Ok, figured it out. Looks like I needed to create the 'And' operator first, then run the command:
.\appcmd.exe set config "wh01-02.testlab.com" -section:system.webServer/advancedLogging/server /+"logDefinitions.[baseFileName='Log404'].filter.condition.[operator='And']" /commit:apphost
.\appcmd.exe set config "wh01-02.testlab.com" -section:system.webServer/advancedLogging/server /+"logDefinitions.[baseFileName='Log404'].filter.condition.[operator='And'].[field='Status',operator='Equals',value='404',caseSensitive='False',regularExpression='False']" /commit:apphost
I am using mac.And to execute mongodb I am going to downloads/mongodb/bin folder and then execute mongodb file, Can I directly execute with out going to downloads/mongodb/bin ?
The whole process is actually pretty well covered in the MongoDB documentation:
What they suggest is to export the installation directory into your path environment variable like so:
export PATH=<mongodb-install-directory>/bin:$PATH
All,
Note: I have updated the question after some feedback.
Thanks to #jisaak for his help so far.
I have the need to run a PowerShell script that adds TCP bindings and some other stuff when I deploy my Cloud Service.
Here is my Cloud Service Project:
Here is my Cloud Service Project and Webrole project:
Here is my task in ServiceDefinition.csdef:
And here is the PowerShell script I want to run:
here is my attempt at the Startup.cmd:
When I deploy I get this in the Azure log:
And this in the powershell log:
Any help would be very much appreciated.
I think I am nearly there but following other people syntax on the web doesn't seem to get me there.
thanks
Russ
I think the issue is that the working directory of the batch command interpreter when it runs Startup.cmd runs is not as expected.
The Startup.cmd is located in the \approot\bin\Startup directory but the working directory is \approot\bin.
Therefore the command .\RoleStartup.ps1 is not able to find the RoleStartup.ps1 as it is looking in the bin directory not in the bin\Startup directory.
Solutions I know to this are:
Solution 1:
Use ..\Startup\RoleStartup.ps1 to call the RoleStartup.ps1 from Startup.cmd.
Soltuion 2:
Change the current working directory in Startup.cmd so that the relative path .\RoleStartup.ps1 is found. I do this by CHDIR %~dp0 (see here) to change into the directory that contains Startup.cmd.
Solution 3:
As Don Lockhart's answer suggested, do not copy the Startup directory to the output, instead leave it set as "Content" in the Visual Studio project. This means the files within it will exist in the \approot\Startup directory on the Azure instance. (You would then want to make sure that the Startup folder is not publically accessible via IIS!). Then update the reference to Startup.cmd in ServiceDefinition.csdef to ..\Startup\Startup.cmd, and update the reference to RoleStartup.ps1 in Startup.cmd to ..\Startup\RoleStartup.ps1. This works on the fact that the working directory is bin and uses ..\Startup to always locate the Startup directory relative to it.
You don't need to set the executionpolicy within your cmd - just call the script. Also, you should use a relative path because you can't rely that there is C disk.
Change your batch to:
powershell -executionpolicy unrestricted -file .\RoleStartup.ps1
Right click on the RoleStartup.ps1 and Startup.cmdin Visual Studio and ensure that the Copy to Output directory is set to copy always.
If this still doesn't work, remove the startup call in your csdef, deploy the service, rdp into it and try to invoke the script by yourself to retrieve any errors.
Edit:
Try to adopt your script as below:
Import-Module WebAdministration
$site = $null
do # gets the first website until the result is not $null
{
$site = Get-WebSite | select -first 1
Sleep 1
}
until ($site)
# get the appcmd path
$appcmd = Join-Path ([System.Environment]::GetFolderPath('System')) 'inetsrv\appcmd.exe'
# ensure the appcmd.exe is present
if (-not (Test-Path $appcmd))
{
throw "appcmd.exe not found in '$appcmd'"
}
# The rest of your script ....
I've found it easier in the past to not copy the content to the output directory. I have approot\bin as the working directory. My startUp task element's commandLine attribute uses a relative reference to the .cmd file like so:
The .cmd file references the PowerShell script relatively from the working directory as well:
PowerShell -ExecutionPolicy Unrestricted -f ..\StartUp\RoleStartup.ps1
Ok,
So I am coming back to this after many different attempts to make it work.
I have tried using:
Startup config in the ServiceDefinition.csdef
I have tried registering a scheduled task on the server that scans the Windows Azure log looking for [System[Provider[#Name='Windows Azure Runtime 2.6.0.0'] and EventID=10004]]
Nothing worked either due to security or the timing of events and IIS not being fully setup yet.
So I finally bit the bullet and used my Webrole.cs => public override bool OnStart() method:
Combined with this in the ServiceDefinition.csdef:
Now it all works. This was not the most satisfying result as some of the other ways to do it felt more elegant. Also, many others posted that they got the other ways of doing it to work. Maybe I would have got there eventually but my time was restricted.
thanks
Russ
I use Yii command line inside web Root folder (C:\xampp\htdocs\myapps\cmd.exe). My command looks like this:
D:\xampp\htdocs\YiiRoot\framework\yiic shell
normally it will works, but now it didn't; I just get no output:
Sorry for late answer.
Have you configured access rules since last time you used it? If index.php isn't accessible without login anymore, the yiic tool will fail. You can overcome that by specifying the path to the config file:
protected\yiic shell protected\config\main.php
I experienced the same thing and in the end I discovered yiic file was unexpectedly empty!
A way to discover what happens behind the scenes is to comment "rem echo off" at the beginning of yiic.bat file.