I have 3 dimensions in the following hierarchy:
BigC
L SmallC
L Brand
(Having 200 combinations)
I am also creating a calculation using a parameter and multiple case statements.
For eg: CASE WHEN parameter=Brand1 THEN Brand1_field - Impact% END
Now I want my parameter to have only the relevant brand values populated for Big C and Small C rather than all the values. Is it possible?
If this is not possible then can I create a calculated field with a column selection?
If i have understood your question properly, I was able to achieve this using Context filter and Filter by Relevant Values.
Drop both Big Company and Small Company dimensions into Filter Card.
Apply Context Filter for Big Company and "Use only relevant values" for Small Company filter.
So as when you select values for Big Company only the related values of small company will be displayed and so the brands.
Find the workbook here : https://www.dropbox.com/s/txam3wfhz8qirqg/StackOverflowSolution.twbx?dl=0
Related
I have a dimension which is simply a list of user groups such as the below:
User Type
Type A
Type B
Type C
I am currently visualising these as an individual pie for each user type with the numerical value shown in the middle which is their answer to a question from another measure. However, I'd like to create a fourth type which is 'All users' so that I have four pies showing at once: All Users, Type A, Type B and Type C.
Is this possible? Would it be a calculated field? I have tried groups but can't get it to work.
Any help much appreciated!
Assuming for the moment that you have User Type on the Columns shelf, you can simply choose Totals->Show Row Grand Totals from the Analysis menu.
An alternate approach is to display two worksheets on the same dashboard. To do that, simply duplicate your worksheet. Remove User Type from the view in the new worksheet. And then place both views next to each other on a dashboard, possibly in a layout container to keep them lined up nicely. Format a bit to remove the titles and outside borders and they can look like one unit.
Remember what a dimension does. It partitions the data rows according to the value of the dimension field, assigning each data row to exactly one partition - exactly like a Group By clause does in SQL. So a data record can’t be associated with more than one member of a dimension. Totals behave differently, which is why they address your use case.
I am trying to filter a table visualization of all of my data by looking to see if a Study Number contains Activity A. If a Study Number contains Activity A then I want to filter for all rows containing those Study Numbers even if the Activity is not A. See mock data below. In my real data set I have ~55,000 rows.
I have created a calculated to return Study Numbers if Activity= A but I am not sure where to go from there. Thanks for any help.
If(UniqueConcatenate([Activity]) OVER ([Study Number])~="A","Y","N")
Will give you this resulting column that you can then filter on (or you can use the formula as a Data Limiting Expression:
I am creating an interactive 'calculator' using tableau. I have a series of dataframes that I have crossed with one another, such that the resulting dataframe is every possible combination between the tables, and every row is unique.
Each column is its own worksheet as a table. Each table in the dashboard is a pane. So, here we have a series of tables with selectable units of measurement, and the final pane on the dashboard should filter to the cell for its respective column, on the unique row of the dataset that the user has selected and 'filtered out'.
I'm having some issues getting this to work and not sure why.
The closest I can think to solving this would be 'Cascading Filters.' Here are a couple resources:
General Use
In dashboard action-filter form
The critical piece, however, is that the filters must be selected in a specific order - therefore making them 'cascading.' This may differ from your presumed concept of clicking/filtering in any order on the worksheets to then arrive to a final answer. I do think that this may be a limitation of Tableau - I don't think that a 'many to many' type of relationship can be set up within Action Filters.
I have a calculation and it outputs multiple values. Then I am creating a table on those values. For example, in below data my formula is
if data is 1 then calculation is `one`
if data is 2 then calculation is `two`
if data is 3 then calculation is `three`
as three doesn't really appear in the output, when I create a table, three is not displayed. Is there any way to display it?
I tried table layout >> show empty rows and columns and it didn't work
data calculation
1 one
2 two
Tableau discovers the possible values for a dimension field dynamically from the query results.
If ‘three’ does not appear in your data, then how do you expect Tableau to know to make a column header for that non existent, but potential, value? It can’t read your mind.
This situation does occur often though - perhaps you want row or column headers to remain stable, even when you change filters in a way that causes some to no longer appear in the query results.
There are a few ways you can force Tableau to pad ** or **complete a domain:
one solution is to pad your data to make sure each value for your dimension field appears in at least one data row.
You can often do this easily by using a union to append some extra rows to your original data. You can often add padding rows that don’t impact any results by leaving all your Measure columns null since nulls are ignored by aggregation functions
Another common solution that is a bit more effort is to make what is known as scaffolding data source that is not much more than a list of your dimension members. You can then use that data source as a primary data source with data blending, making your original data source secondary.
There are two situations where Tableau can detect the absence of data and leave space for it in the visualization automatically
for numeric types, you can create a bin field that will automatically pad for missing bins
similarly, date fields can show missing values because, like bins, Tableau can tell when a month doesn’t appear in the data and leave room for it in the view
I have Tableau report where I am showing data by category in columns.
The table shows all columns when there is no filter on data. But when filter is applied, some of the categories do not have data, so table shrinks, hiding columns without data
Is there a way to always show columns regardless of data or not in that column?
Please see screenshots below.
Go to Analysis >Table layout> Show columns with no data or
Analysis>Table layout>Show rows with no data
The next step depends on whether your "disappearing" fields are dimensions or measures.
If you want to force the display of members for specific dimensions, then one (kind of complex) solution is to use an advanced Tableau feature called data blending to force the existence of dimension members, even if there are no related measure values. The trick is to make a simple data source, say a text file, that lists the members of each dimension. Use that source as the primary data source, and make the original data source the secondary source.
Go to Analysis >Table layout> Show columns with no data or Analysis>Table layout>Show rows with no data
Also You can right click on header and select show missing values if you are using line chart.
Solution 1: (When you’re working with Dates or Numeric bins)
Right click on the numerical or Date column to extrapolate the missing values. As you notice in the lower part of the screenshot, this will not work on Categorical data !
Solution 2: Categorical Data
As indicated in the accepted answer, Analysis > Table Layout > Show Empty Rows will get you the same result for Categorical (Text) Data
Solution 3: Calculated Columns
If for some reason, none of the 2 above point & click solutions work, you can create calculated columns to calculate the measure for each of the Categories with the below formula and then line them up on the Columns to achieve the same result
Profit (Category 1)
IF MyColumn = "Category 1" THEN
Profit
ELSE
NULL
END
Profit (Category 2)
IF MyColumn = "Category 2" THEN
Profit
ELSE
NULL
END
Not the most convenient solution when you have hundreds of unique values in your column, but nevertheless a workaround !