Related
This question already has answers here:
Closed 10 years ago.
Possible Duplicate:
How can I more easily switch between buffers in Emacs?
GNU Emacs 24.1.1
Hello,
When I want to switch buffers I use the following C-x C-b if I have many buffers active. But I find it very inefficient.
And it will display a lists of open buffers in the next buffer (I don't like this in the next buffer). Normally I have 4 buffers open at the same time.
Using the above I will then have to put the cursor (C-o) to get focus in the buffer-list buffer, when scroll up or down to select the buffer I want.
Sometimes I use C-x-b if I don't have many active buffers. However, I always have many.
However, I am looking for something then will open up a small buffer with a list of buffers (the minimum needed - just enough to show all buffers), and will automatically have focus. I scroll to select the buffer I want. And it will appear in the buffer I had focus on before I open the list of buffers. The buffer-list will then disappear.
Does anyone know of anything like this to make switching buffers easier.
Many thanks for any advice,
Apart from ido-mode, good buffer switching solutions are:
Plain-old C-x b + icomplete-mode
ibuffer - just rebind C-x C-b to ibuffer to see it in action:
(global-set-key (kbd "C-x C-b") 'ibuffer)
Helm - an incremental narrowing and selection framework useful to find just about anything (buffers included).
Check ido-mode. C-x C-b is the old way.
The ido lets you interactively do things with buffers and files.
I have been looking into packages that would enable me to have tabs in my emacs editor. Would like to open multiple files in a single emacs window. Any help/link would be appreciated
Emacs has this functionality built in. They are called buffers C-x C-f opens a new file of a name you provide. C-x b lets you change between buffers. C-x C-b lists all open buffers. C-x k closes the current buffer.
If you want multiple buffers in one window then C-x 2 splits the windows horizontally. C-x 3 will split it vertically. C-x 1 will close all the windows that are not the current one. C-x o cycles between open panes. &c.
GNU the organization that manages the code base for GNU Emacs has a wonderful tutorial
Note: the the above segment C- means while holding the <CTRL> key
post script: the ido library makes working with emacs in generally much easier.
You can already open multiple files in buffers. However, if you want a visual guide, then this is what you might want: http://emacswiki.org/emacs/TabBarMode
Caveat emptor: You might have to configure it a bit.
or you can use elscreen
and use Gnu/Linux too, so i remap the Winkey to manage my tabs.
emacs doesn't contain "tabs" like an internet browser its best to understand the concept of buffers like the others have said but if you want to have a tab bar at the top anyway just to give a quick reminder of what buffers are open I suggest looking at the TabBarMode in the emacs wiki.
When using buffers i like to use m-x ibuffer since you can filter out which buffers your interested in. say you only want to see the buffers which are associated with files in a /home/flood/coding/epicgame/ directory, i simple go to ibuffer, type / f then type epicgame and a filter will be applied, then to remove the filter simply press / twice and remember that C-h m is your friend.
This technique has helped me alot, you can even OR filters together and merge them into groups. I love emacs XD
How can I modify the way emacs picks which buffer to show after closing a buffer?
When I have multiple columns showing the same buffer, and then open another file in one of the buffers and then close the newly opened buffer, it doesn't switch back to the previous buffer, but to another buffer.
I'll try to explain with an example:
Start with a new emacs at *scratch*
C-x 2 (split into two columns)
C-x C-f 1 (find file 1)
C-x o (switch to other frame)
C-x b 1 (find file 1)
C-x C-f 2 (find file 2)
C-x k (kill buffer)
Now it switches to scratch but I would like it to show 1 in both windows again, is it possible to make emacs behave this way?
This may not be a direct answer to your question, but it might help.
Emacs manages its buffer list, including deciding which buffer gets displayed when you kill one (via kill-buffer). I haven't looked into how it's done, but the documentation is "out there". Lots of people have created custom buffer-stack management magic to change the way emacs does things, maybe some of them are based on bayesian analysis, or whatever. You can imagine the possibilities.
I've never looked into changing the way emacs manages its buffers. Instead I just bind other-window and switch-to-buffer to easy keystrokes (C-x o, C-x b) and I get really good at using them.
you could create a simple function for what you want: it should destroys all other windows, then split the window so that the current buffer is displayed in both. Luckily, emacs has functions that do exactly those things.
(defun cheeso-show-buffer-two-windows ()
"Close all other windows; then split, and show the current
buffer in both windows."
(interactive)
(delete-other-windows)
(split-window-vertically))
Bind that to a keystroke, and badda-bing, you're there. This is a vertical split - the windows are displayed in a vertical stack. If you want it horizontally split (the windows are side-by-side), then replace ... well, you know.
This also doesn't quite help directly, but Winner mode might help you get where you want to get.
Are you using tabbar-mode? I had the same problem and for me tabbar was the cause. Tabbar adds the function tabbar-buffer-kill-buffer-hook to kill-buffer-hook. You can remove it with (remove-hook 'kill-buffer-hook 'tabbar-buffer-kill-buffer-hook).
If you don't use tabbar try M-x describe-variable kill-buffer-hook. One of the functions in this list should be responsible for messing with your buffers.
I usually type M-x buffer-menu to switch buffers in Emacs. How can I do this with a shorter command? Its quite a long string to type.
Thanks!
You can use C-x b to change buffers. You have to enter the first few letters of the buffer name, and of course you can use completion. If you press TAB (the most useful key in Emacs), a list of (matching) buffers appears. You can click in this list to switch to a buffer.
You can bind buffer-menu to a key. Pick a key that's not used for another command — let's say f12 — and add the following line to the file ~/.emacs:
(global-set-key (kbd "<f12>") 'buffer-menu)
There are many other interfaces to changing buffers in Emacs, and they can be significantly more efficient than C-x b and C-x C-b. Since this tends to be a very personal choice, I recommend you experiment with a few and keep the one(s) you feel most comfortable with.
C-x C-b
As stated here
I'd highly recommend switching to a mode designed for efficient buffer switching.
If your version of Emacs is recent enough (22+):
M-x ido-mode
and then:
C-x b
to switch buffers, with incremental substring matching, C-s and C-r rotate forward and backwards through the matches.
If you have an older version of Emacs, it should have:
M-x iswitchb-mode
and then, as with ido-mode:
C-x b
opens up the minibuffer to let you choose the buffer to switch to.
Bind C-x C-b to buffer-menu. There is no sense leaving it bound to list-buffers. list-buffers is just a eunuch version of buffer-menu. ;-)
And you might want to try this: http://www.emacswiki.org/emacs/BufferMenuPlus
Try bs-show (in my opinion a way better than C-x C-b). You can bind it to F9 by adding this to .emacs:
(global-set-key (kbd "<f9>") 'bs-show)
In GNU emacs, every time I hit Ctrl-x Ctrl-b to see all of my buffers, the window is split to show the buffer list, or if I have my window already split in 2 (for instance, I will have a shell running in the lower window), the buffer list appears in the other window.
My desired behavior is for the buffer list to appear in my active window so that I can select the buffer I want and continue to working in the same window, rather than having to Ctrl-x Ctrl-o to the other buffer, selecting the buffer (with enter) and editing that buffer in the other window... I've googled for it but it doesn't seem to be a common desire? I wonder if anyone has an elispy (or other) solution?
You might want to rebind C-x C-b to invoke buffer-menu rather than list-buffers:
(global-set-key "\C-x\C-b" 'buffer-menu)
Just customize the variable same-window-regexps. display-buffer will display any buffer whose name matches a regexp there in the currently-selected window.
(You will want to add "[*]Buffer List".)
not exactly a solution, but ido-mode provides a different and powerful way to interact with buffers. C-x b will then show a list of all the open buffers, and the one you select will open in the current window.
Strangely, there isn't an answer here about ibuffer.
I would recommend this as a standard change for the majority of Emacs users:
(global-set-key (kbd "C-x C-b") 'ibuffer)
ibuffer is a very advanced replacement for the default buffer listing, and not only features the exact behaviour requested, but provides a wealth of other functionality.
I listed a few ibuffer filtering and grouping basics in
Emacs: help me understand file/buffer management, but be sure to read the documentation for details.
Try to add
(ido-mode 1)
to your .emacs, and enjoy the result :)
If you like the original buffer list (as opposed to the 'buffer-menu solution proposed by others), you can use this:
(global-set-key (kbd "C-x C-b") 'my-list-buffers)
(defun my-list-buffers (&optional files-only)
"Display a list of names of existing buffers.
The list is displayed in a buffer named `*Buffer List*'.
Note that buffers with names starting with spaces are omitted.
Non-null optional arg FILES-ONLY means mention only file buffers.
For more information, see the function `buffer-menu'."
(interactive "P")
(switch-to-buffer (list-buffers-noselect files-only)))
Which is the same function as before, only in the current window.
I highly recommend bs.el from http://www.geekware.de/software/emacs/ Install it and:
(require 'bs)
(add-hook 'bs-mode-hook 'turn-on-font-lock)
(global-set-key "\C-x\C-b" 'bs-show)
It manages buffers and window configuration in the right way, so everything requires minimum number of keystrokes.
Not sure where I got this but:
;;; Faster buffer switching
(global-set-key [(C tab)] 'buffer-menu)
This makes Ctrl-Tab display all buffers in the current window. You can then navigate to a buffer and hit Enter to visit it.
Another not-what-you-asked-for solution: don't select the desired buffer with the mouse, rather finish typing its name (use tab-completion to reduce keystrokes and increase accuracy), then hit return. The buffer list will disappear, and the new file will be open in the previously active window.